Acura RSX

Welcome to your specialist for Acura RSX drivetrain components. Finding the right spare parts for a performance-focused car like the RSX demands precision and expertise. At CVJoint24 we...

Products for Acura RSX

22 products
1 - 22 of 22
Item no.:142539
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 40 mm
  • Total length: 36 mm
  • Joint diameter: 83 mm
Item no.:241109
  • Position: Inner
  • Inner splines: 30
  • Seal diameter: 40 mm
  • Total length: 58,4 mm
  • Joint diameter: 80 mm
Item no.:348959
  • Position: Front right, Inner
  • Inner splines: 32
  • Seal diameter: 40 mm
  • Total length: 58,5 mm
  • Joint diameter: 83 mm
Item no.:0943691
  • Inner diameter: 44 mm
  • Outer diameter: 68 mm
Item no.:246632
  • Position: Front right, Inner
  • Inner splines: 30
  • Seal diameter: 40 mm
  • Total length: 152,5 mm
  • Joint diameter: 80 mm
Item no.:357812
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 60 mm
  • Outer splines: 26
  • ABS teeth: 50
Item no.:0915119
  • Inner diameter: 35 mm
  • Outer diameter: 58 mm
Item no.:0941797
  • Inner diameter: 40 mm
  • Outer diameter: 56 mm
Item no.:0920194
  • Inner diameter: 35 mm
  • Outer diameter: 58 mm
Item no.:0959697
  • Inner diameter: 41 mm
  • Outer diameter: 56 mm
Item no.:0604465
  • Total length: 120 mm
Item no.:0607406
  • Total length: 84 mm
Item no.:0695282
  • Total length: 120 mm
Item no.:3528815
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 64 mm
  • Outer splines: 28
  • ABS teeth: 50
Item no.:0619435
Item no.:290153
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 378 mm
Item no.:0945560
  • Inner diameter: 42 mm
  • Outer diameter: 58 mm
Item no.:0974633
Item no.:295106
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 377 mm
Item no.:0657541
Item no.:340556
  • Position: Inner
  • Inner splines: 32
  • Seal diameter: 40 mm
  • Total length: 120,5 mm
  • Joint diameter: 84 mm

Drivetrain for Acura RSX

The Acura RSX is an iconic model that combines sporty performance with day-to-day reliability. To maintain its sharp handling and efficient power delivery, you need a drivetrain in peak condition. As an RSX owner, you know that every component, from the gearbox to the wheel hubs, plays a decisive role in how the car handles acceleration and cornering. At CVJoint24 we specialise in Acura and understand the technical demands placed on these vehicles. The drivetrain is the heart of the car's motion, and the slightest imbalance can compromise comfort or lead to costly collateral damage. By choosing the right spare parts, you ensure that your car continues to deliver the power and precision it is famous for. Our range is carefully curated to meet the high standards of European drivers seeking quality and durability. Whether you drive a base model or a Type-S, proper maintenance of the drivetrain is key to a long lifespan for your car.

How the drivetrain is structured on the Acura RSX

The Acura RSX uses a front-wheel-drive (FWD) layout where power from the engine is transmitted via a transverse gearbox to the front wheels. This configuration demands robust drive shafts capable of managing torque and steering angles at the same time. The drivetrain system on the RSX consists of several critical components, including inner and outer CV joints, CV boots and intermediate shafts. The inner constant velocity joints mount directly to the gearbox, allowing the driveshaft to move up and down in line with the suspension. The outer joints sit at the wheels and facilitate steering. Between them lies the drive shaft, which must be perfectly balanced to prevent vibrations. On the RSX, precision across these components is particularly vital due to the car's stiff chassis and direct steering feel. Play in any of these components is quickly felt and can ruin the driving experience. Understanding how these parts interact helps you diagnose issues early before they cause complete breakdown.

Common faults and symptoms

There are several clear warning signs that the drivetrain on your Acura RSX is starting to wear out. One of the most frequent symptoms is vibration occurring specifically under acceleration. This typically points to the inner CV joints having developed pitting or wear in their tracks, producing an imbalance whenever power is applied. If you instead hear a clicking or knocking sound on full steering lock, such as when parking, the outer CV joints are usually to blame. Another critical warning sign is grease spattered across the inner rim or around the wheel arch, indicating a split CV boot. Once the boot tears, lubricating grease escapes whilst road grit and water penetrate, rapidly destroying the joint. You should also watch out for steering wheel shudder at higher speeds, which may stem from a bent drive shaft or imbalance in the assembly. By acting promptly at the first sign of these symptoms, you can often replace a single component rather than the entire drive shaft assembly.

Common parts to replace on the Acura RSX

On the Acura RSX, certain components endure heavier wear than others, particularly under spirited driving. The parts that most frequently require attention include:

  • Inner CV joints for Acura RSX – Critical for eliminating vibrations under throttle.
  • CV boots – The most affordable insurance against costly repairs; inspect at every service.
  • Outer CV joints – Exposed to severe stress during hard cornering and acceleration.
  • Drive shafts – May require complete replacement if bent or if the joints are integrated.

Replacing a worn inner CV joint is a routine job that restores the car's smooth power delivery. Because the RSX is often driven enthusiastically, these components wear faster than on standard road cars. We always recommend using high-specification grease and robust retaining clamps during fitting to ensure the new parts last for miles to come. Investing in quality parts from the start saves both time and money in the long run.

How to find the right part for the Acura RSX

Browse directly to the relevant subcategory for your Acura RSX:

On a car with several potential drivetrain issues, it pays to start in the exact subcategory straight away. Comparing specific subcategories for the Acura RSX makes it easier to distinguish between drive shaft, CV joint or propeller shaft issues, leading you directly to the page that best matches your symptoms and fitment requirements.

Finding the exact part for an Acura RSX can sometimes be challenging, as technical specifications vary across engine options and gearbox variants. The most reliable way to secure the correct fit is to filter by your car's make, model and engine variant in our store. When searching for an inner constant velocity joint for the Acura RSX, verify the spline counts on both the gearbox side and shaft side, alongside the sealing diameter. While selecting your vehicle details provides a reliable match, chassis breaks can occasionally apply. At CVJoint24 we provide extensive technical data to guide your choice. If you are uncertain, you are always welcome to contact our customer support team with your technical specifications; we will gladly verify that your chosen part fits seamlessly before installation. This avoids unnecessary returns and gets your car back on the road without delay.

Why shop at CVJoint24

Choosing CVJoint24 as your supplier of drivetrain parts for your Acura RSX connects you with a dedicated Swedish driveline specialist. We bring specialised expertise in power transmission alongside a catalogue known for both depth and quality. Our goal is to make sure you get the right part first time, backed by rigorous technical matching and our comprehensive fitment guarantee. We understand how important your car is to you, and we offer prompt dispatch across the European Union so you can get your Acura back on tarmac without waiting. We never compromise on build standards; our parts are manufactured to meet or exceed original equipment specifications. Ordering from a dedicated specialist delivers more than just a spare part: you gain access to genuine technical know-how and the confidence of receiving the correct component every time. We take pride in being the preferred destination for car enthusiasts who demand the very best for their drivetrain.

Frequently Asked Questions about Acura RSX

How do I know if the inner CV joint on my Acura RSX is faulty?

The most common symptom of a worn inner CV joint is vibrations throughout the car that occur specifically under acceleration. Unlike wheel imbalance, which is typically felt at certain speeds, this is directly linked to load on the drivetrain.

Do all CV joints fit the Acura RSX regardless of model year?

No, there can be differences in spline counts and dimensions depending on the model year and whether it is a Type-S or the base model. Always select your car's specific model and engine to ensure the correct fitment.

Can I replace just the CV boot if my Acura RSX is making noise?

If you already hear noises such as clicking or knocking, dirt and debris have already damaged the internal components of the joint. At that stage, replacing just the CV boot is not enough; the entire CV joint must be replaced to restore proper operation.

What is included when I buy an inner CV joint for my RSX from you?

Our inner CV joints are supplied as complete kits. This means you receive the joint itself, a model-specific CV boot, high-grade CV joint grease and all necessary retaining clips.

How quickly can I get parts delivered?

We aim to dispatch all orders promptly from our warehouse, ensuring fast delivery across Europe so you can minimise downtime for your Acura RSX at the garage.

Do you offer a fitment guarantee on parts for the Acura RSX?

Yes, we provide a complete fitment guarantee. If you select your vehicle's correct model and engine and order the recommended part, we guarantee that it will fit your car.