Acura TSX

Welcome to your specialist for Acura TSX drivetrain components. Finding the right spare parts for an Acura TSX requires precision, especially regarding critical transmission parts. At...

Products for Acura TSX

2 products
1 - 2 of 2
Item no.:144399
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 40 mm
  • Joint diameter: 84 mm
  • Outer splines: 27
Item no.:241607
  • Position: Inner
  • Inner splines: 34
  • Seal diameter: 40 mm
  • Total length: 120 mm
  • Joint diameter: 84 mm

Drivetrain for Acura TSX

The Acura TSX is a car model that combines Japanese engineering with a sporty driving experience, making it a popular choice for drivers who value both performance and reliability. To maintain these qualities, it is essential that the car's drivetrain functions flawlessly. The drivetrain is the heart of the vehicle's power delivery, responsible for transferring every horsepower from the engine to the tarmac with minimal loss. As an Acura TSX owner in Europe, finding specific, high-quality components can sometimes be a challenge, but at CVJoint24 we have made it our mission to be the dedicated specialist for precisely these parts. We understand that an Acura requires components with exact tolerances to avoid imbalance and unnecessary wear. By choosing the right parts for your Acura, you safeguard not only the car's function but also its resale value and safety. Our range is carefully selected to meet the high demands placed on modern vehicles on European roads.

How the Acura TSX drivetrain is built

The setup of the drivetrain on the Acura TSX is technically sophisticated and optimised for front-wheel drive. The system consists of a transversely mounted engine paired with a gearbox that distributes power via two drive shafts. Each drive shaft is a complex assembly comprising an inner and an outer CV joint, protected by rubber CV boots. The inner CV joint plays a critical role as it allows the driveshaft to change length in line with suspension movement. This is necessary to maintain a constant delivery of power regardless of road irregularities. The outer constant velocity joint instead handles the larger articulation angles that occur when steering. For the Acura TSX, the interplay between these components and the chassis is fine-tuned to deliver its distinctive driving feel. Understanding this drivetrain and its mechanical limits is key to identifying when a component needs replacement before it causes broader damage to other transmission parts.

Common faults and symptoms

Symptoms of a failing drivetrain in an Acura TSX can be subtle at first but often escalate quickly. The most prominent sign of trouble with the inner CV joint is a vibration or shudder through the car under load, particularly during acceleration between 40 and 80 km/h. Unlike wheel imbalance, which is typically felt through the steering wheel, these vibrations are felt more in the seat and floor. If you notice that the vibrations cease as soon as you ease off the accelerator, this is a strong indication that the inner joint is worn. Another common symptom is a dull clunking noise during gear changes or when transitioning from engine braking to acceleration. For the outer CV joint, the classic sign is a rhythmic clicking noise when turning sharply. It is also vital to inspect the CV boots regularly; a split boot is the beginning of the end for any CV joint, as the essential grease is thrown out and replaced by water and road grime.

Common parts to replace on the Acura TSX

When it comes to servicing or repairing the power transmission on an Acura TSX, certain parts are subject to more wear than others. The inner CV joint is one such component that often requires attention after many kilometres, especially on cars with higher-output engine options. When replacing it, not only is the joint itself important, but also the quality of the grease used and how tightly the boot seals. We always recommend using high-quality clamps to ensure no dirt can enter. In our range for the Acura TSX, we focus on offering complete kits containing everything you need for a successful installation. By replacing a worn inner CV joint on your Acura TSX in good time, you can prevent vibrations from damaging gearbox output bearings or suspension components. Being proactive with these replacements saves both time and money in the long run and keeps your Acura in top condition.

Finding the right part for the Acura TSX

Proceed to the relevant section for your Acura TSX:

On a vehicle with several possible drivetrain issues, it is wise to start in the right category directly. By comparing the exact component sections for the Acura TSX, it becomes easier to distinguish between faults in the drive shaft, CV joint or propeller shaft, and to navigate to the page that best matches your symptoms and fitment.

Our platform is designed to give you all the technical details you need, such as dimensions and spline counts, so you can be completely confident in your choice before placing an order. Should you still be unsure, our customer support team is on hand to help guide you.

Why shop at CVJoint24

Choosing CVJoint24 as your supplier of drivetrain parts for your Acura TSX means choosing expertise and peace of mind. As a Swedish driveline specialist shipping across the EU from our warehouse in Helsingborg, Sweden, we have built trust by consistently supplying the right parts with the highest precision. We understand how important it is that your car runs reliably every day. Our fitment guarantee is a central part of our promise to you: simply select your car's make, model and engine, and we guarantee the part will fit. We combine the personal service of a specialist with modern, efficient e-commerce. Whether you are a professional garage technician or a DIY mechanic, you will find components engineered to last. We are proud to offer an extensive catalogue that covers niche models like the Acura TSX, making us your ultimate partner for all things drivetrain.

Frequently Asked Questions about Drivetrain Parts for Acura TSX

How do I know if my Acura TSX needs a new inner CV joint?

The most common sign is body vibration during acceleration, particularly between 40 and 80 km/h. If the vibration ceases as soon as you lift off the accelerator, a worn inner CV joint is typically the cause.

How do I find the right drivetrain parts for my Acura TSX?

Simply select your car's make, model, and engine variant in our vehicle selector. This is the most reliable way to find the exact drivetrain components that fit your specific Acura TSX.

What is included in a CV joint kit for the Acura TSX?

Our kits typically contain the CV joint itself, a vehicle-specific CV boot, high-quality grease, circlips, and the necessary clamps for a complete installation.

Why does my Acura TSX vibrate under acceleration?

Vibration during acceleration is often caused by wear in the tracks of the inner CV joint, creating an imbalance as torque is transferred from the gearbox to the drive shaft.

Do you offer a guaranteed fit for Acura parts?

Yes, we guarantee that the part will fit your Acura TSX when selected using your car's correct make, model, and engine details.

How quickly will my inner CV joint for Acura TSX be delivered?

Orders are dispatched quickly across the EU from our central warehouse in Helsingborg, Sweden, helping you get your car back on the road without delay.