Alfa Romeo 159 Sportwagon

Spare parts and drivetrain components for the Alfa Romeo 159 Sportwagon.

Products for Alfa Romeo 159 Sportwagon

29 products
1 - 24 of 29
Item no.:0579347
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 30
  • Seal diameter: 61 mm
  • Outer splines: 30
Item no.:0532852
  • Position: Outer
  • Inner splines: 27
  • Splines wheel side: 30
  • Seal diameter: 61 mm
  • Outer splines: 30
Item no.:2178277
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,028 mm
  • Joint diameter: 100 mm
Item no.:1170973
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 640 mm
  • Joint diameter: 94 mm
Item no.:2167662
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 30
  • Total length: 1,015 mm
  • Joint diameter: 94 mm
Item no.:0434579
  • Position: Inner
  • Inner splines: 26
  • Splines gearbox side: 25
  • Seal diameter: 34,9 mm
  • Outer splines: 25
Item no.:0478590
  • Position: Inner
  • Inner splines: 26
  • Splines gearbox side: 25
  • Seal diameter: 34,9 mm
  • Outer splines: 25
Item no.:0404532
  • Position: Front left, Inner
  • Inner splines: 27
  • Splines gearbox side: 27
  • Seal diameter: 35 mm
  • Outer splines: 27
Item no.:7315902
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 627 mm
  • Joint diameter: 100 mm
Item no.:0548469
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 30
  • Seal diameter: 61 mm
  • Outer splines: 30
Item no.:1109207
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 600 mm
  • Joint diameter: 100 mm
Item no.:2122179
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,059 mm
  • Joint diameter: 100 mm
Item no.:511001
  • Position: Rear right
  • Splines gearbox side: 33
  • Splines wheel side: 30
  • Total length: 880 mm
  • Diameter 1: 81 mm
Item no.:412591
  • Position: Rear left
  • Splines gearbox side: 33
  • Splines wheel side: 30
  • Total length: 755 mm
  • Diameter 1: 81 mm
Item no.:0808999
  • Position: Front
  • Inner diameter: 30 mm
Item no.:0678083
  • Total length: 108 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
  • Height: 85 mm
Item no.:0560713
  • Position: Front, Outer
  • Inner splines: 27
  • Splines wheel side: 30
  • Outer diameter: 100 mm
Item no.:3509605
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:149973
  • Position: Front left, Inner
  • Inner splines: 26
  • Splines gearbox side: 25
  • Seal diameter: 34,9 mm
  • Total length: 172 mm
Item no.:215413
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,075 mm
Item no.:119419
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 587 mm
  • Thread size: M24x1.5
Item no.:1199957
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 580 mm
Item no.:2136463
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 1,026 mm
Showing 1–24 of 29 products

Drivetrain for Alfa Romeo 159 Sportwagon

The Alfa Romeo 159 Sportwagon is renowned for its blend of Italian styling and sharp, engaging handling. For this substantial and high-torque estate to perform at its peak, it requires a robust and fully functional drivetrain. Power transmission lies at the heart of the car's driving dynamics, and components such as drive shafts and CV joints are subject to significant stress, especially in the torquey JTDm diesel engines and the all-wheel-drive Q4 models. We offer a curated range of parts, technically verified to meet the rigorous demands for durability and precision expected by Alfa Romeo 159 Sportwagon owners.

Our selection ranges from complete drive shafts to specific inner and outer CV joints. We focus on providing parts that not only fit physically, but also match original equipment specifications for materials and manufacturing tolerances. This is crucial for preventing future issues with imbalance or premature wear, which would otherwise compromise both ride comfort and safety on the road.

How the drivetrain works on the Alfa Romeo 159 Sportwagon

The drivetrain on an Alfa Romeo 159 Sportwagon is a sophisticated arrangement, predominantly front-wheel drive, though also available with the advanced Q4 four-wheel-drive system. The engine is transversely mounted, meaning the drive shafts have unequal lengths to reach each front wheel. This asymmetry requires the shafts to be perfectly balanced to eliminate torque steer, where the car pulls to one side under hard acceleration. Power is delivered from the gearbox via the inner CV joint, through the drive shaft, and out to the outer CV joint seated in the wheel hub.

Every component in this setup plays a vital role. The outer CV joint allows the front wheels to turn while continuing to receive drive, whilst the inner CV joint accommodates vertical suspension travel. For an Alfa Romeo 159 Sportwagon, it is particularly important that these constant velocity joints remain properly greased and protected by intact CV boots; the chassis is tuned for a firm, direct steering feel that quickly deteriorates if any play develops in the driveline joints.

Common faults and symptoms

There are several telltale signs that the drivetrain on your Alfa Romeo 159 Sportwagon is wearing out. One of the most frequent symptoms is a clicking or knocking noise when manoeuvring on full steering lock at low speed, such as while parking. This typically points to a failing outer CV joint on your Alfa Romeo 159 Sportwagon, often caused by a split boot letting in grit and road moisture.

Another common issue is vibration through the car under acceleration, particularly between 70 and 100 km/h. This is a classic indication of wear in an inner CV joint on the Alfa Romeo 159 Sportwagon. As this estate is relatively heavy, the inner joints endure heavy loads, and even minor play in the joint housing can send noticeable vibrations straight into the cabin. If you spot grease splattered on the inside of the wheel rim or wheel arch, it is time to inspect the joint before complete failure occurs.

Common replacement parts for Alfa Romeo 159 Sportwagon

Depending on driving style and accumulated mileage, certain components need replacing more frequently than others. We have structured our inventory to cover the most critical requirements for your car. Here are the most relevant categories for the Alfa Romeo 159 Sportwagon:

  • Drive shaft for Alfa Romeo 159 Sportwagon
  • Outer CV joint for Alfa Romeo 159 Sportwagon
  • Inner CV joint for Alfa Romeo 159 Sportwagon

Replacing an entire drive shaft can often be more cost-effective than replacing an individual joint, especially on higher-mileage vehicles. It saves garage labour time and ensures the whole assembly is refreshed. For DIY mechanics looking to carry out a targeted repair, we provide premium-quality individual CV joints supplied with all necessary fitting hardware, including grease, clamps and circlips.

Find the right part for your Alfa Romeo 159 Sportwagon

Navigate directly to the relevant category for your Alfa Romeo 159 Sportwagon:

When diagnosing drivetrain issues, it helps to start in the exact subcategory. By comparing specific sections for the Alfa Romeo 159 Sportwagon, it is easier to isolate faults between drive shafts, CV joints or propeller shafts, taking you straight to the parts that match your symptoms and vehicle specification.

Selecting the correct spare part for an Alfa Romeo 159 Sportwagon can be tricky, as parts vary between engine options (such as the 1.9 JTDm, 2.4 JTDm or 1750 TBi) and gearbox types. Spline counts on the driveshaft and CV joints differ, and these must match exactly for the component to fit. To make ordering straightforward, you can easily filter parts by choosing your car's make, model and engine variant.

Selecting your engine and production year displays the parts engineered specifically for your version of the Alfa Romeo 159 Sportwagon. We always advise checking technical details such as overall length and spline counts if multiple variants exist for your powertrain. Our catalogue is set up to provide maximum accuracy, reducing the risk of ordering the wrong part so you can get your car back on the road without delay.

Why shop with CVJoint24

As a Swedish driveline specialist shipping across the EU, we provide expert knowledge that general car parts retailers rarely offer. We focus exclusively on power transmission, giving us a thorough understanding of the technical demands found in specific vehicles like the Alfa Romeo 159 Sportwagon. Our goal is to deliver car parts that combine dependable quality with competitive pricing, never cutting corners on safety.

When you order from us, you benefit from a wide product range dispatched from our central warehouse in Helsingborg, Sweden. We know your Alfa Romeo 159 Sportwagon deserves the best, which is why we partner strictly with trusted manufacturers. With straightforward filtering by make, model and engine, in-depth technical expertise, and an unwavering commitment to precise fitment, CVJoint24 is your reliable partner for driveline maintenance.

Frequently Asked Questions about Drivetrain for Alfa Romeo 159 Sportwagon

How do I know whether the inner or outer CV joint is failing on my Alfa Romeo 159 Sportwagon?

A worn outer CV joint typically produces a clicking or snapping noise when cornering, whereas a failing inner CV joint causes noticeable vibrations through the car under acceleration, whether cornering or driving in a straight line.

Does the same drive shaft fit both manual and automatic Alfa Romeo 159 Sportwagon models?

No, drive shafts usually differ between manual and automatic gearboxes on the Alfa Romeo 159 Sportwagon. Always select your specific model, year and engine variant to ensure you order the correct version.

Why is it important to replace a cracked CV boot immediately?

The boot protects the CV joint from road dirt and water while retaining the essential lubricating grease. If it splits, the joint will wear out rapidly, leading to a much more costly replacement of the complete joint or drive shaft.

How many splines does a CV joint have on the Alfa Romeo 159 Sportwagon?

The spline count varies depending on the engine and model year. Tooth counts frequently differ on both the wheel hub side and the gearbox side, so always check the detailed specifications in the product description.

Is it difficult to replace a drive shaft yourself on a 159 Sportwagon?

It requires solid mechanical knowledge and the proper tools, including a heavy-duty socket for the hub nut and tools to separate ball joints. For an experienced DIY mechanic, it is a fully manageable job.

Do your CV joint kits include everything needed for installation?

Yes, our CV joint kits for the Alfa Romeo 159 Sportwagon are delivered complete with the constant velocity joint, CV boot, dedicated grease, circlips and clamps for a professional installation.