Austin Metro I Fastback

Welcome to CVJoint24, your Swedish driveline specialist for the Austin Metro I Fastback. Maintaining the transmission and drivetrain of a classic compact car requires parts made to...

Products for Austin Metro I Fastback

5 products
1 - 5 of 5
Item no.:3471657
  • Position: Inner
  • Inner splines: 19
  • Outer diameter: 77 mm
Item no.:216568
  • Position: Front right
  • Splines gearbox side: 21
  • Splines wheel side: 29
  • Total length: 672 mm
  • Joint diameter: 72,5 mm
Item no.:119046
  • Position: Front left
  • Splines gearbox side: 21
  • Splines wheel side: 29
  • Total length: 596 mm
  • Joint diameter: 72,5 mm
Item no.:0549562
  • Position: Outer
  • Inner splines: 19
  • Splines wheel side: 29
  • Seal diameter: 48 mm
  • Outer splines: 29
Item no.:0699122
  • Total length: 81 mm

Drivetrain for Austin Metro I Fastback

The Austin Metro I Fastback is an iconic small car where the drivetrain plays a decisive role in its characteristic driving dynamics. As driveline specialists, we understand the importance of every component functioning in perfect harmony, from the gearbox to the wheel hub. The drivetrain in this model is designed to be compact and efficient, placing high demands on part durability and correct fitment. When choosing spare parts from us, you gain access to a range specifically tailored to preserve the car's original performance and long-term reliability.

Maintaining an Austin Metro I Fastback means taking responsibility for its technical integrity. Daily driving subjects the drivetrain to significant stresses from engine torque, weather and road debris. By investing in high-quality components such as an outer CV joint for your Austin Metro I Fastback and robust drive shafts, you not only extend the car's lifespan but also ensure a safer drive. We help you find the right parts straight away so you can focus on enjoying your classic on the road.

How the drivetrain is engineered on the Austin Metro I Fastback

The drivetrain on an Austin Metro I Fastback uses a classic front-wheel-drive layout with a transverse engine. Power is delivered from the engine through the gearbox to the two drive shafts, which turn the front wheels. Each drive shaft features two joints: an inner joint by the gearbox and an outer joint at the wheel hub. This design enables the front wheels to steer and articulate over bumps while delivering constant power. It is a compact setup requiring precision in every component to prevent unnecessary wear and energy loss.

The outer CV joints are particularly vital as they must cope with tight steering angles, while the inner joints accommodate the axial movement that occurs as the suspension travels. The entire assembly is protected by rubber CV boots that retain grease and seal out dirt and moisture. On the Austin Metro I Fastback, correct component dimensions are critical due to limited clearance in the wheel arches and around the gearbox. A correctly maintained drivetrain eliminates vibrations and delivers that nimble driving feel the model is loved for.

Common faults and symptoms

The clearest sign of drivetrain trouble on your Austin Metro I Fastback is unusual noise. A metallic clicking or knocking sound on full lock usually points to a worn outer CV joint. This typically happens when a CV boot splits, allowing grease to escape and abrasive road grit to enter the joint. If you instead experience vibrations through the steering wheel or bodyshell under acceleration, an inner constant velocity joint or an imbalanced drive shaft may be at fault.

Another common warning sign is grease spattered inside the wheel rim or on the garage floor, pointing to a torn boot. Left unattended, joint failure can lead to total breakdown where the driveshaft detaches from the hub, leaving the car stranded. Catching these early symptoms saves you from costly secondary damage. Routine inspection of your drivetrain parts is the best way to keep your Austin Metro I Fastback completely reliable.

Common parts to replace on the Austin Metro I Fastback

Certain drivetrain components on the Austin Metro I Fastback naturally require replacement over time due to wear and tear. Our range is carefully curated to meet these needs with pinpoint precision. The most frequently replaced parts include complete drive shafts, inner and outer CV joints, and protective rubber boots. Because the Metro I Fastback features specific front suspension geometry, replacement parts must match original factory dimensions precisely to ensure trouble-free fitting.

  • Drive shafts: dedicated versions tailored to the model's variations.
  • Outer CV joints: 1 high-grade option engineered for smooth steering action.
  • Inner CV joints: 1 robust option providing dependable power transfer from the gearbox.
  • CV boots: 1 model-specific kit providing lasting protection against the elements.

Fitting a replacement CV boot to your Austin Metro I Fastback in good time is one of the most cost-effective maintenance jobs you can carry out, preventing premature failure of the CV joints. We make sure you have access to all the parts required to keep your driveline in peak condition, from individual joints to complete driveshafts.

How to find the right part for your Austin Metro I Fastback

Browse directly to the relevant subcategory for your Austin Metro I Fastback:

When troubleshooting driveline issues, starting in the correct category saves valuable time. By comparing the dedicated product groups for the Austin Metro I Fastback, you can easily distinguish between drive shaft, CV joint or prop shaft problems and navigate straight to the parts that match your symptoms and exact model specification.

If you are unsure which component has failed, start with a thorough visual check of the driveline. Look out for torn rubber boots or leaking grease. Our customer support team, with specialized knowledge of Austin drivetrains, is also on hand to help if you have questions regarding your vehicle's setup or part compatibility.

Why buy from CVJoint24?

Choosing CVJoint24 means relying on a Swedish driveline specialist with in-depth technical expertise in power transmission. We focus exclusively on these critical components, allowing us to provide an inventory and know-how that general car-parts factors rarely match. For your Austin Metro I Fastback, this ensures parts that not only fit properly out of the box, but also deliver the durability required for thousands of trouble-free kilometres. We dispatch quickly from our central warehouse in Helsingborg, Sweden, across the EU to get your car back on the road without delay.

By selecting your vehicle by make, model and engine, you can be sure of ordering the exact part required for your car. We take pride in supporting classic car enthusiasts and professional garages across Europe who demand the highest quality for their Austin. With CVJoint24, you receive high-grade components, specialist technical support and parts engineered to keep your drivetrain performing faultlessly.

Frequently Asked Questions about Drivetrain Parts for Austin Metro I Fastback

How do I know if my Austin Metro I Fastback needs a new drive shaft?

The most common signs are heavy vibrations while driving, unusual noises under acceleration, or visible damage to the shaft. If you notice unusual shaking from the car, it is time to inspect your drive shafts.

Do all CV joints fit all Metro models?

No, there are differences depending on model year and engine variant. Always select your Austin Metro I Fastback make, model and engine to find the exact CV joint required.

Why is there a clicking noise when I turn in my Austin Metro?

A clicking sound when cornering is a classic symptom of a worn outer CV joint. This is usually caused by grease loss following a torn CV boot.

Are grease and clamps included when I buy a CV boot from you?

Yes, our CV boot kits for the Austin Metro I Fastback are supplied as complete kits with the necessary grease and mounting clamps to ensure a proper installation.

Can I replace just the CV boot if the joint is still undamaged?

Absolutely. If you catch a split boot early before dirt and moisture have damaged the constant velocity joint, replacing just the CV boot is sufficient. It is a very cost-effective way to avoid more expensive repairs.

How quickly do you deliver drivetrain parts for Austin?

We aim for next-day dispatch on all in-stock items. If you place your order in good time, your parts for your Austin Metro I Fastback are normally dispatched the same day.