BMW 1 Convertible

Welcome to your drivetrain specialist for the BMW 1 Convertible. Preserving the drivetrain on an open-top sports car demands high-grade components to protect the crisp driving dynamics...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 1 Convertible

9 products
1 - 9 of 9
Item no.:641076
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Outer diameter: 92 mm
  • ABS teeth: 24
Item no.:659026
  • Position: Rear, Outer
  • Seal diameter: 57 mm
  • Inner splines: 24
  • Diameter: 26 mm
  • ABS teeth: 48
Item no.:624261
  • Position: Rear
Item no.:0857573
  • Inner diameter: 30 mm
  • Outer diameter: 55 mm
Item no.:649471
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Outer diameter: 92 mm
  • ABS teeth: 24
Item no.:652678
  • Position: Rear, Outer
  • Seal diameter: 57 mm
  • Inner splines: 24
  • Diameter: 26 mm
  • ABS teeth: 48
Item no.:0808187
  • Inner diameter: 30 mm
  • Outer diameter: 55 mm
Item no.:0843879
  • Inner diameter: 30 mm
  • Outer diameter: 55 mm
Item no.:0802478
  • Inner diameter: 30 mm
  • Outer diameter: 55 mm

Drivetrain for BMW 1 Convertible

The BMW 1 Convertible combines the open-air freedom of a cabriolet with BMW's renowned driving dynamics and engineering precision. To preserve these dynamic qualities, the drivetrain must remain in first-class condition. The drivetrain is the system responsible for transferring engine power to the tarmac, and on a rear-wheel-drive car like the BMW 1 Convertible, this involves a sophisticated assembly of components working in complete harmony. At CVJoint24, we specialise in these vital components so you can find the right parts without hassle. With a total of 9 dedicated items in our range for this model, we cover the most critical requirements, from the initial power delivery at the gearbox to the outer wheel hubs. Selecting the correct components is vital for both safety and driving comfort, especially in a vehicle focused entirely on the driving experience, where any vibration or unwanted noise spoils the journey.

How the drivetrain works on the BMW 1 Convertible

The layout of the drivetrain on a BMW 1 Convertible reflects classic German engineering, featuring a front-mounted engine and rear-wheel drive. Power exits the gearbox and is transferred rearwards to the differential via a propeller shaft. This prop shaft is supported by centre bearings to suppress vibration and ensure smooth rotation at all speeds. From the differential, power is routed to the rear wheels through drive shafts equipped with both inner and outer CV joints. These constant velocity joints allow the suspension to travel vertically while maintaining uninterrupted power transmission, regardless of road surfaces or load conditions. Because the BMW 1 Convertible is frequently driven hard, these components endure substantial torque and mechanical stress, meaning quality materials and manufacturing precision are paramount for long-term durability and reliability.

Common faults and symptoms

Several distinct warning signs indicate that a drivetrain component on your BMW 1 Convertible is failing. One of the most typical symptoms is a clicking or knocking sound on full steering lock at lower speeds, which usually points to a worn outer CV joint or one damaged by a torn CV boot. If you notice shuddering or vibrations through the cabin under hard acceleration, this often indicates excessive play in an inner CV joint. Vibrations that remain steady or intensify alongside road speed are commonly caused by prop shaft imbalance or a worn propeller shaft centre bearing. Addressing these symptoms promptly is vital, as a damaged component can cause costly secondary damage to other parts such as the differential or gearbox. Ignoring driveline noises can ultimately lead to total failure, leaving you stranded at the roadside.

Common replacement parts for BMW 1 Convertible

For the BMW 1 Convertible, we have identified the key components that most frequently require replacement over time to maintain factory performance. Our range covers the following categories:

  • Outer CV joint BMW 1 Convertible: We stock 2 options engineered to withstand the angles and loads generated during spirited cornering.
  • Inner CV joint BMW 1 Convertible: With 2 available options, our joints effectively eliminate drivetrain vibrations under acceleration.
  • Propeller shaft BMW 1 Convertible: We supply 1 dedicated propeller shaft built to original equipment specifications for immaculate balance and power transfer.
  • Propeller shaft centre bearing BMW 1 Convertible: With 4 distinct designs, we cover the specific variations across engine types and chassis specifications.

By focusing specifically on these essential categories, we deliver deeper technical expertise than general car-part suppliers. Every spare part is thoroughly selected to satisfy the high demands of a BMW drivetrain.

How to find the correct parts for your BMW 1 Convertible

Navigate directly to the right category for your BMW 1 Convertible:

When troubleshooting driveline issues, narrowing down your search straight away is the best approach. By browsing our specialised component sections for the BMW 1 Convertible, it is easy to distinguish between drive shaft, CV joint and propeller shaft issues, allowing you to proceed directly to the parts that match your symptoms and exact fitment.

Sourcing suitable replacement parts can be daunting, but at CVJoint24 we make it straightforward for every BMW owner. The most dependable method to find the right part for your BMW 1 Convertible is to filter by your car's make, model and engine variant. This automatically narrows down our catalogue to the parts that match your vehicle's technical specifications. Because BMW models often feature variations based on engine output and gearbox type, verifying these details prevents incorrect orders. We also recommend checking critical technical measurements, such as the spline count on a CV joint or the internal diameter of a centre bearing, both of which are clearly listed in our product descriptions. Our goal is to ensure you order accurately the first time, giving you total confidence that every component fits cleanly without modification.

Why choose CVJoint24

CVJoint24 is far more than a generic parts retailer; we are the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. When you order from us, you benefit from expert technical knowledge alongside an in-depth component range that general motor factors rarely match. We offer a correct-fit guarantee, ensuring full confidence that your selected part will fit your BMW 1 Convertible correctly when chosen using your vehicle specifications. With reliable, rapid delivery, we make sure your car is not left off the road or occupying workshop space longer than necessary. We recognise the vital importance of component quality, partnering exclusively with trusted manufacturers who meet strict automotive standards. Choose CVJoint24 for proven expertise, peace of mind and an experienced driveline partner. Enjoy a seamless purchasing experience with quality parts at fair prices.

Frequently Asked Questions about Drivetrain for BMW 1 Convertible

What are the most common signs of a worn CV joint on my BMW 1 Convertible?

The most common signs are a clicking noise when turning on full lock or vibrations under acceleration. If the noise disappears when driving in a straight line, the outer CV joint is usually the culprit.

Do all BMW 1 Series propeller shafts fit the Convertible model?

No, propeller shafts are often specific to the body style, engine variant and gearbox. Always select your car's make, model and engine on cvjoint24.com to find the exact prop shaft for your Convertible.

How does your fitment guarantee work for BMW parts?

When you select your car's make, model and engine variant and order a recommended part, we guarantee it will fit. In the unlikely event that it does not fit, we will help you find the correct part at no extra cost.

Why do you offer four different centre bearings for the BMW 1 Convertible?

This is because BMW uses different propeller shaft diameters and mountings depending on the engine and drivetrain fitted to the car. Our search function helps you filter out the correct variant.

Can I replace just the inner CV joint, or does the entire drive shaft need to be replaced?

On the BMW 1 Convertible you can often replace just the inner or outer CV joint, which is a much more cost-effective option than replacing the entire drive shaft if the shaft itself is undamaged.

How quickly can I get my spare parts delivered?

We aim to offer fast delivery across the EU for most of our stocked items, ensuring you can get your BMW 1 Convertible back on the road quickly.