BMW 1 Coupé 120 I

Welcome to CVJoint24, your Swedish specialist for drivetrain components for the BMW 1 Coupé 120 I. Keeping your car's power delivery system in prime condition is vital for driving...

Products for BMW 1 Coupé 120 I

5 products
1 - 5 of 5
Item no.:645813
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:652180
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:646656
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:642584
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:655712
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48

Drivetrain for BMW 1 Coupé 120 I

The BMW 1 Coupé 120 I represents a unique balance between compact design and sporty performance, a combination that places specific demands on the vehicle's drivetrain. As an owner of this model, you are likely keen to maintain the distinctive driving dynamics BMW is renowned for. The power transmission in a 120 I is engineered to handle engine torque with precision, but over time these components suffer natural wear. Here at CVJoint24, you will find a dedicated range of parts carefully selected to match or exceed original specifications.

We are not merely an ordinary car-parts shop; we are a Swedish driveline specialist focusing entirely on the complexities of the drivetrain. By choosing the right parts for your BMW, you ensure every bit of horsepower reaches the road efficiently and safely. Our comprehensive range for the BMW 1 Coupé 120 I covers the most critical components required to keep your car in peak condition for many years to come. We understand the importance of precise fitment and technical integrity for this specific model variant.

How the drivetrain is built on the BMW 1 Coupé 120 I

The layout of the power delivery system on a BMW 1 Coupé 120 I follows the marque's classic rear-wheel-drive philosophy, meaning the rear drive shafts play a central role. Engine power travels via the gearbox through a propeller shaft to the rear differential, which then distributes torque to the rear wheels via drive shafts fitted with both inner and outer joints. The outer joint allows for wheel articulation, whilst the inner constant velocity joint accommodates the axial plunge that occurs as the car's suspension travels on uneven roads.

This entire setup is protected by CV boots packed with specialised grease that minimises friction and heat build-up. If a boot splits, the precision-machined surfaces inside the joint are exposed to dirt, road salt, and moisture, quickly causing accelerated wear and eventual failure. Understanding this layout is essential when diagnosing issues or carrying out maintenance on your BMW 1 Coupé 120 I. Every component in the drivetrain must work in perfect harmony to retain the car's balance and responsive handling.

Common faults and symptoms

There are several distinct signs indicating that drivetrain components are starting to wear on your BMW 1 Coupé 120 I. One of the most typical symptoms is a rhythmic clicking or knocking noise that is most noticeable during sharp cornering at low speeds. This frequently points to a damaged outer CV joint on the BMW 1 Coupé 120 I, usually caused by a torn boot letting in grit and road grime. If you experience chassis vibrations during acceleration instead, this often suggests wear in an inner joint.

You should also regularly inspect the underside of the car for grease flung onto the inside of the wheels or around the differential. If the car feels unstable under throttle or makes strange noises during engine braking, the drivetrain should be checked immediately. Ignoring these early warning signs can cause secondary damage to the differential or gearbox, leading to considerably more expensive repairs. Taking prompt action at the first sign of trouble will ensure your BMW remains reliable and safe to drive.

Common parts to replace on the BMW 1 Coupé 120 I

On the BMW 1 Coupé 120 I, the CV joints and their boots require the most attention over time. Our catalogue focuses on the parts most essential for preserving your car's reliability and performance. We supply components precision-machined to original 120 I factory specifications, guaranteeing straightforward installation and lasting durability.

  • Outer CV joint for BMW 1 Coupé 120 I: Located at the wheel hub, this component is vital for delivering drive torque to the road wheels.
  • Inner CV joint for BMW 1 Coupé 120 I: Mounted to the differential, this unit absorbs axial suspension movement over uneven surfaces.
  • CV boots: Protect the joints from grit and moisture whilst keeping lubricating grease sealed inside.

Replacing these parts before total failure prevents collateral damage to the rest of the drivetrain. We ensure our components meet the exacting standards set by BMW, giving you complete peace of mind for every kilometre. Our kits come complete with high-pressure grease and mounting hardware to make replacement straightforward.

How to find the right part for your BMW 1 Coupé 120 I

Proceed to the correct product section for the BMW 1 Coupé 120 I:

When troubleshooting driveline issues, selecting the correct subcategory from the outset is vital. By browsing the specific sections for the BMW 1 Coupé 120 I, you can easily distinguish between drive shaft, CV joint, or prop shaft faults and find the exact replacement matching your symptoms and vehicle fitment.

We also advise verifying technical specifications such as spline count if multiple options are shown for your model. Our goal is to ensure you receive the right part first time, saving both time and expense at the garage. If you have questions about fitment or dimensions, our knowledgeable team is on hand to guide you to the right component for your BMW 1 Coupé 120 I.

Why buy from CVJoint24?

CVJoint24 is your dedicated specialist for driveline parts. As a Swedish driveline specialist, we combine in-depth technical knowledge with a vast stocked inventory in our Helsingborg warehouse. When purchasing from us, you receive not only top-quality car parts, but also access to our specialist advice and reliable fitment guarantee. We understand your BMW 1 Coupé 120 I belongs on the road, not stranded on a workshop ramp waiting for spares, which is why we dispatch our products quickly across the EU.

We never compromise on material quality, offering only components proven to withstand demanding driving conditions. Blending the comprehensive stock of a large supplier with the dedicated support of an independent specialist, we ensure your buying experience is smooth and hassle-free from start to finish. Welcome to your European driveline specialist.

Frequently asked questions about drivetrain parts for BMW 1 Coupé 120 i

How do I know if my BMW 1 Coupé 120 i needs a new outer CV joint?

The most common sign is a clicking noise coming from the wheels when making sharp turns. If the noise increases with speed or under acceleration while cornering, this is a clear indication that the outer joint is worn.

Can I replace just the CV boot on my BMW 1 Coupé 120 i?

Yes, if you catch damage to the boot early before dirt has entered the joint and caused noise, replacing the boot and repacking it with fresh grease may be sufficient.

Why do vibrations occur in my BMW 1 Coupé 120 i during acceleration?

Vibrations under load are often caused by wear in the inner CV joint. Because the 120 i is rear-wheel drive, you should inspect the inner joints on the rear axle if these symptoms appear.

Does the same CV joint fit all BMW 1 Coupé models?

No, drivetrain components vary depending on the engine variant and model year. Always select your car's make, model and engine to find parts specifically tailored to the 120 i.

What is included in a CV joint kit from CVJoint24?

Our kits are complete and include the CV joint, a model-specific boot, high-quality grease, circlips and the necessary clamps for correct installation.

How quickly can I receive parts for my BMW 1 Coupé 120 i?

We offer fast delivery across Europe on most of our in-stock items, meaning you can get your parts delivered quickly and start your repair without delay.