BMW 1 Serie 116 I E81

Drivetrain components and spare parts for BMW 1 Serie 116 I E81. Confirm fitment by selecting your make, model and engine before ordering.

Products for BMW 1 Serie 116 I E81

26 products
1 - 24 of 26
Item no.:0346736
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:5140329
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0263862
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0220191
  • Total length: 1,531 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Item no.:0301995
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:4150184
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:646465
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:659359
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:7233353
  • Total length: 1,376 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 84 mm
Item no.:0854091
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:624836
  • Position: Rear
  • Total length: 1,499 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Bolt circle diameter 2: 78 mm
Item no.:6571632
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0417967
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:643941
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:641579
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:657395
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:692242
  • Position: Rear
Item no.:694901
  • Position: Rear
Item no.:0636736
  • Position: Rear
Item no.:647202
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:413125
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Showing 1–24 of 26 products

Drivetrain for BMW 1 Serie 116 I E81

The BMW 1 Serie 116 I E81 is renowned for its sheer driving pleasure and compact design, with its three-door body offering a distinctly sporty presence. To preserve that characteristic BMW feel, the drivetrain must remain in absolute top condition. The drivetrain is the intricate system transferring power from the engine through to the road wheels, and in the 116i E81, this relies on a sophisticated rear-wheel-drive layout demanding precision from every single component. Every part, from the gearbox to the wheel hubs, must work in complete harmony to deliver the sharp dynamics the brand is celebrated for. Wear and tear on these components can severely compromise your car's performance, fuel economy and driving safety.

As driveline specialists, we understand the exact requirements of this model and its bespoke chassis architecture. We have brought together the most critical components so you can maintain your car with durable spare parts built to last. Investing in high-grade parts is not merely about restoring immediate function; it also protects your vehicle's value and the distinctive driving dynamics offered by the E81 platform. Choosing components engineered to original specifications ensures your BMW continues to perform exactly as it did when it rolled off the production line.

How the drivetrain is engineered on the BMW 1 Serie 116 I E81

The drivetrain architecture of the BMW 1 Serie 116 I E81 follows BMW's classic configuration: a longitudinally mounted engine driving the rear wheels. Power leaves the engine and is channelled via the gearbox into a central propeller shaft for BMW 1 Serie 116 I E81. Running underneath the floorpan, this prop shaft is split into two sections with a centre bearing in the middle to curb unwanted vibrations and accommodate driveline angles. The prop shaft directs torque straight to the rear differential, which then apportions power between the two rear wheels.

From the rear differential, drive is delivered to the wheels through two drive shafts. While this layout delivers the car's celebrated 50:50 weight distribution, it also introduces several critical wear points, including universal joints, flexible couplings (guibo discs) and the propeller shaft centre bearing. Understanding this complete chain of power delivery is essential when diagnosing drivetrain issues. Every component is engineered to withstand the specific torque loads of the 116i engine, making exact-fit replacement parts vital for long-term reliability and to prevent premature wear on the differential and gearbox.

Common faults and symptoms

There are several clear tell-tale signs that the drivetrain on your BMW 1 Serie 116 I E81 is wearing out. One of the most common warning signs is a distinct vibration felt through the floorpan or cabin seat during acceleration, which typically points to an unbalanced prop shaft, a failing centre bearing or worn universal joints. If you notice a clicking or knocking noise when cornering tightly or pulling away, a CV joint on a drive shaft for BMW 1 Serie 116 I E81 is likely failing, often triggered by a split CV boot letting in road grit and moisture.

Another common issue on this model is the sudden illumination of the ABS warning light or erratic DSC traction control interventions under normal driving. This is frequently caused by a corroded or fractured ABS ring for BMW 1 Serie 116 I E81 mounted on the rear driveshaft. Rust builds up beneath the reluctor ring, forcing it to swell outward and rub against or misalign with the wheel speed sensor, corrupting the signal. Paying attention to these early warning signs will help you avoid far more extensive and costly garage repairs, as unresolved issues quickly lead to secondary damage in expensive assemblies like the differential or wheel bearings.

Common parts to replace on the BMW 1 Serie 116 I E81

When maintaining the drivetrain on a BMW 1 Serie 116 I E81, three product groups are most frequently replaced. We supply an extensive range encompassing drive shafts, propeller shafts and ABS rings, all manufactured to meet the strict tolerances and material standards BMW drivers expect. By replacing worn driveline components with guaranteed-fit parts, you can fully restore your vehicle's original road manners and safety.

  • Drive shafts: We supply dedicated drive shafts tailored for the rear axle of your 116i, ensuring flawless power transfer to the wheels free from noise and vibration.
  • Propeller shafts: Our catalogue covers the various prop shaft configurations engineered across different gearbox options and production dates, ensuring smooth, vibration-free running.
  • ABS rings: We offer 2 types of reluctor rings to resolve faulty wheel-speed sensor signals and restore full functionality to your vehicle's safety systems.

It is good practice to inspect related hardware, such as CV boots, bolts and fixings, whenever you replace a major driveline component. Installing a complete new drive shaft is often far more cost-effective than rebuilding an individual constant velocity joint, particularly when considering garage labour rates and long-term service life.

How to find the right part for your BMW 1 Serie 116 I E81

Select your component category for the BMW 1 Serie 116 I E81:

On a vehicle where several drivetrain faults can produce similar symptoms, starting in the right category saves valuable time. By comparing the exact component sections for the BMW 1 Serie 116 I E81, you can accurately distinguish between a failing drive shaft, a worn CV joint or an out-of-balance prop shaft, guiding you to the right replacement for your car.

Why choose CVJoint24?

CVJoint24 is the international shop of a Swedish driveline and power transmission specialist, with our central warehouse in Helsingborg, Sweden. We focus exclusively on drivetrain components, giving our team a level of technical expertise that general motor factors simply cannot match. When you order from us, you get premium-quality car parts backed by our fitment guarantee and access to an extensive specialist catalogue. We know how crucial it is to get your vehicle back on the road without delay, which is why we dispatch stocked items quickly across the European Union.

Our goal is to ensure you always get the right part first time. Every product in our range has been thoroughly vetted for fit and durability to withstand demanding European road and weather conditions. We are proud to be the trusted partner for drivers who demand dedicated expertise and proven quality for their BMW driveline systems. Combining dedicated technical support, rapid EU shipping and competitive prices, CVJoint24 is the natural choice for your BMW 1 Serie 116 I E81.

Frequently Asked Questions about the Drivetrain for BMW 1 Series 116 I E81

What are the most common signs of a failing drive shaft on my BMW 116i E81?

The most common symptoms include clicking noises during sharp turns, vibrations under acceleration, and in some cases grease leaking from a damaged CV boot.

Why does my BMW 1 Series vibrate during acceleration?

Vibrations under acceleration on a rear-wheel-drive BMW are often caused by wear in the propeller shaft centre bearing, imbalance in the prop shaft itself, or worn universal joints.

Do all propeller shafts fit all 116i E81 models?

No, the propeller shaft length and mountings can vary depending on whether the car has a manual or automatic gearbox, as well as the production year. Always select your exact make, model and engine to find the right part.

How do I know if my BMW needs a replacement ABS ring?

If the ABS warning light comes on, or if you feel the ABS system pulsing through the brake pedal at low speeds on dry surfaces, a cracked or corroded ABS ring is a very likely cause.

Can I replace just the CV joint, or do I need to replace the entire drive shaft on an E81?

On the BMW 1 Series E81, it is usually most cost-effective to replace the complete drive shaft, as it comes fully assembled with both inner and outer joints to ensure a dependable, long-term repair.

What does the fitment guarantee mean at CVJoint24?

Our fitment guarantee means we ensure the part will fit your BMW 1 Series 116 I E81 correctly when you select your vehicle's make, model and engine variant before ordering.