BMW 1 Serie 118 I E81

Spare parts and drivetrain components for BMW 1 Serie 118 I E81. Confirm compatibility using your make, model and engine before ordering.

Products for BMW 1 Serie 118 I E81

26 products
1 - 24 of 26
Item no.:0337546
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:5193162
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0262970
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0295397
  • Total length: 1,531 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Item no.:0378014
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:7292501
  • Total length: 1,376 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 84 mm
Item no.:4128353
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:642261
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:657080
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0818617
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:623858
  • Position: Rear
  • Total length: 1,499 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Bolt circle diameter 2: 78 mm
Item no.:6537333
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0453058
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:628414
  • Position: Rear
  • Total length: 1,405 mm
Item no.:647832
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:644010
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:658909
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:690837
  • Position: Rear
Item no.:692774
  • Position: Rear
Item no.:0622219
  • Position: Rear
Item no.:648990
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Showing 1–24 of 26 products

Drivetrain for BMW 1 Serie 118 I E81

The BMW 1 Serie 118 I E81 is widely celebrated for its dynamic handling and compact design. To preserve this renowned driving experience, an impeccably working drivetrain is vital. The drivetrain transfers power from the engine to the rear wheels, requiring every single component in the system to work in total harmony. At CVJoint24, we understand the technical demands of this model and supply a range that matches or exceeds original equipment specifications. With 10 specifically matched products for the 118 I E81, we make sure you find the precise parts required for safe, smooth and efficient power transfer.

Maintaining the drivetrain on a BMW is not merely about replacing broken items; it is about preventing future issues. By choosing the right spare parts from a dedicated specialist, you safeguard the car's balance and performance. Whether dealing with a worn drive shaft or a corroded ABS ring, an exact fit is essential to avoid secondary damage to other suspension and chassis components. Our focus is on supplying parts engineered to withstand the rigours of both daily city motoring and more spirited driving on country roads.

Drivetrain layout on the BMW 1 Serie 118 I E81

The BMW 1 Serie 118 I E81 utilises a classic rear-wheel-drive architecture with a longitudinally mounted engine. The system begins at the gearbox, sending power rearwards via a propeller shaft. This prop shaft is a central element running along the vehicle's underside directly into the rear differential. The differential then divides the torque between the two rear drive shafts, enabling the wheels to rotate at different speeds when cornering—an essential factor in the vehicle's roadholding and poise.

While this configuration is proven and robust, it relies on every joint and bearing remaining in sound condition. The propeller shaft incorporates centre bearings and universal joints that dampen vibrations and accommodate articulation. In turn, the drive shafts feature CV joints protected by durable CV boots. On the BMW 1 Serie 118 I E81, the drive shafts also carry the ABS rings, which are critical for the proper operation of safety systems including ABS and Dynamic Stability Control (DSC). Any fault within these assemblies will immediately degrade how the car feels from behind the wheel.

Common faults and symptoms

One of the most frequent indications of drivetrain trouble on the BMW 1 Serie 118 I E81 is vibration felt at specific speeds or during acceleration. This can often be traced back to an unbalanced propeller shaft or a deteriorated prop shaft centre bearing. If you notice a sharp clicking or knocking noise while turning, it typically points to a failing outer CV joint on a driveshaft. Because the drive shafts endure constant angular variations and heavy torque, wear is inevitable over time—particularly if a drive shaft boot has split and let in abrasive road grime.

Another common issue on this generation of the BMW 1 Serie is rust developing underneath the ABS rings. As rust builds up beneath the ring, it forces the reluctor ring to expand until it fractures or rubs directly against the wheel speed sensor. This usually triggers the ABS warning light or causes unexpected DSC intervention during gentle braking. Addressing these symptoms early prevents more extensive repairs and keeps your vehicle safe in all driving conditions.

Common replacement parts for the BMW 1 Serie 118 I E81

When it is time for routine maintenance or repairs on your BMW 1 Serie 118 I E81, certain driveline parts are replaced more often than others. We have structured our catalogue logically so that you can navigate directly to the correct category for your car's requirements. Here are the primary sections for your model:

  • Drive shaft BMW 1 Serie 118 I E81 – Dedicated complete shafts to replace worn or damaged rear units.
  • Propeller shaft BMW 1 Serie 118 I E81 – Precision-engineered prop shafts and related components for uninterrupted power delivery.
  • ABS ring BMW 1 Serie 118 I E81 – Multiple reluctor ring options to resolve erratic sensor readings and rust-related faults.

Replacing a complete drive shaft can often be more cost-effective than rebuilding an individual constant velocity joint, especially once garage labour is considered. Conversely, fitting a replacement ABS ring is an affordable fix compared to replacing an entire shaft assembly when the rest of the unit is in good order. Our product selection provides dependable solutions for every scale of repair.

How to find the correct parts for your BMW 1 Serie 118 I E81

Navigate directly to the relevant subcategory for your BMW 1 Serie 118 I E81:

When troubleshooting driveline problems, choosing the exact product group from the start saves time. By narrowing down the specific component categories for the BMW 1 Serie 118 I E81, you can clearly differentiate between faults in the drive shafts, constant velocity joints or prop shaft, leading straight to the parts matching your symptoms and specifications.

Identifying the precise part for your BMW 1 Serie 118 I E81 can occasionally be complex, as variations occur across manufacturing months or optional equipment packs. The most reliable way to select the right components is to filter by your car's exact make, model and engine variant. Filtering by vehicle specification ensures you only view items confirmed for technical compatibility with your car, removing guesswork and saving valuable time during installation.

Once you have selected your model, we recommend reviewing technical details such as overall length, ABS ring tooth counts, or prop shaft flange dimensions where applicable. At CVJoint24, our priority is to provide thorough, accurate specifications so you can pick the right part on your first try. If you are uncertain which component is at fault, a visual inspection on a vehicle ramp before ordering will help verify the problem against the parts we list.

Why shop with CVJoint24

CVJoint24 is not merely another general car parts outlet; we are the dedicated international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden across the European Union. For BMW drivers, this provides direct access to true technical expertise focused on strict manufacturing tolerances and long-term durability. We hold our own inventory, which ensures direct quality control and in-depth understanding of every component we sell. Our aim is to deliver the ideal balance of reliability, competitive pricing and technical support.

Choosing CVJoint24 means you benefit from dependable logistics and our straightforward fitment guarantee. We understand that when your vehicle is booked into the garage, prompt arrival is crucial, so we optimize our shipping workflows across the EU to get your components delivered quickly. Rely on an established specialist for your BMW 1 Serie 118 I E81—we know drivelines inside and out.

Frequently Asked Questions about Drivetrain for BMW 1 Serie 118 I E81

How do I know if the propeller shaft on my BMW 118i E81 needs replacing?

The most common signs are body vibrations that increase with speed, or a thumping noise beneath the car during acceleration. This is often caused by wear in the universal joints or the centre bearing.

Why is the ABS warning light on in my BMW 1 Serie E81?

A very common fault on this model is that the rear ABS ring has rusted and cracked, disrupting the sensor signal. Replacing the ABS ring is an effective and affordable solution.

Do all BMW 1 Series drive shafts fit my 118i?

No, drive shafts vary depending on engine output, gearbox type and model year. Always select your make, model and engine on cvjoint24.com to ensure the correct fit for your specific E81.

What is the benefit of buying a complete drive shaft rather than just a CV joint?

A complete drive shaft saves workshop time during installation and ensures that both the inner and outer CV joints, as well as the CV boots, are brand new, providing longer overall service life for the drivetrain.

Are CV boots included when I buy a drive shaft for my BMW?

Yes, when you purchase a complete drive shaft from us, it comes fully assembled with both inner and outer CV boots and grease, ready for immediate installation.

How quickly can I receive my spare parts for my BMW 118i?

We offer fast delivery across the EU for our stocked items, ensuring you get your BMW 1 Serie 118 I E81 back on the road without delay.