BMW 1 Serie 118 I E88

Spare parts and drivetrain components for BMW 1 Serie 118 I E88. Select your make, model and engine to ensure a perfect fit before ordering.

Products for BMW 1 Serie 118 I E88

27 products
1 - 24 of 27
Item no.:0307516
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:5170568
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0279290
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0249235
  • Total length: 1,531 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Item no.:0385444
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:7203605
  • Total length: 1,376 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
  • Bolt circle diameter 2: 84 mm
Item no.:6172603
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:4115659
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:5133452
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:642605
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:657089
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0848774
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:623519
  • Position: Rear
  • Total length: 1,499 mm
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Bolt circle diameter 2: 78 mm
Item no.:6544850
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0442424
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:641177
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:648353
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:654782
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:693581
  • Position: Rear
Item no.:696211
  • Position: Rear
Item no.:0618287
  • Position: Rear
Item no.:644012
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Showing 1–24 of 27 products

Drivetrain for BMW 1 Serie 118 I E88

The BMW 1 Serie 118 I E88 combines driving pleasure with German engineering, and keeping its distinctive road handling requires a drivetrain in first-rate condition. As the owner of an E88 Convertible, you know that power delivery is central to the entire driving experience. The drivetrain is responsible for transferring the engine's power from the gearbox all the way to the rear wheels with minimal losses. Because the 118 I model is often used for spirited summer motoring as well as daily commuting, its components endure substantial strain over time. Wear on drive shafts or propeller shafts can quickly impair ride comfort and, in the worst case, lead to costly breakdowns that could have been avoided. Here at CVJoint24 you will find the specific car parts needed to keep your BMW running with precision. We focus exclusively on high-quality spare parts that meet or exceed original equipment specifications, which is vital for a vehicle with BMW's technical complexity and exacting balance demands.

How the drivetrain is engineered on BMW 1 Serie 118 I E88

The layout of the drivetrain on a BMW 1 Serie 118 I E88 follows BMW's classic rear-wheel-drive principle, giving the car its balanced chassis dynamics. Power is generated by the four-cylinder engine and sent via the gearbox to a longitudinal propeller shaft. This prop shaft is a critical link transferring torque to the rear differential. To manage vibrations and changing operating angles, the propeller shaft is fitted with centre bearings and flexible couplings. From the differential, power is distributed to the wheels via two robust drive shafts. Each driveshaft features inner and outer CV joints that accommodate suspension travel while delivering a smooth transfer of power. Furthermore, ABS rings play an essential role by supplying the vehicle's safety systems with accurate wheel speed data. On the E88 model, these components must work together in complete harmony; if one starts to fail, stability and driving feel suffer. Understanding this layout makes it much simpler to pinpoint issues, whether that means propeller shaft imbalance or a worn universal joint.

Common faults and symptoms

Recognising the symptoms of a failing drivetrain is crucial for rectifying issues before they cause secondary damage. On the BMW 1 Serie 118 I E88, vibration is one of the most common signs that something is wrong in the power delivery. If you feel shuddering through the chassis, particularly under acceleration or at specific road speeds, it may point to an out-of-balance propeller shaft on your BMW 1 Serie 118 I E88 or a worn centre bearing. Another frequent sign is a clicking or popping noise during sharp turns at low speed, often caused by worn outer CV joints on a BMW 1 Serie 118 I E88 drive shaft. In addition, corrosion on an ABS ring can cause the ABS warning light to illuminate intermittently or make the traction control intervene unexpectedly under normal braking. A dull thud or clunk when changing gear or lifting off the accelerator can also indicate play in the universal joints or flex disc. By acting on these early warning signs, you can prevent minor issues from turning into major repairs that compromise your safety and budget.

Common parts to replace on BMW 1 Serie 118 I E88

Within our range for BMW 1 Serie 118 I E88, we have identified the most critical components that often require replacement during the vehicle's life cycle to maintain that new-car feel. We stock a broad selection of parts tailored to this specific model variant. Choosing the correct part is not only a question of function, but also of long-term durability and road safety. A defective propeller shaft can cause harmful vibrations that damage bearings in both the gearbox and differential, whilst a cracked ABS ring can disable essential safety features right when you need them most. That is why our range is carefully selected to fit your BMW 1 Serie 118 I E88 accurately without any need for modifications.

  • Drive shafts: We stock several variants engineered to transfer torque reliably to the rear wheels under all driving conditions.
  • Propeller shafts: With multiple options available, we cover the various configurations fitted to manual and automatic gearboxes.
  • ABS rings: We offer corrosion-resistant models engineered to deliver precise signals to the car's control units.

Finding the right part for BMW 1 Serie 118 I E88

Select the component section for your BMW 1 Serie 118 I E88:

On a vehicle with multiple potential driveline issues, it pays to navigate straight to the relevant category. By comparing the exact component sections for BMW 1 Serie 118 I E88, it becomes much easier to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and vehicle specification.

Why shop at CVJoint24

CVJoint24 is your dedicated specialist for drivetrain and transmission components for German premium marques. As a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden, we have built up deep expertise in brands such as BMW, and specifically models like the BMW 1 Serie. We understand the necessity of precision and quality, reflected in our carefully selected catalogue where each component is tested to withstand harsh European roads, road salt and seasonal temperature shifts. When you buy from us, you receive high-grade spare parts backed by our fitment guarantee and expert technical advice. Fast dispatch ensures your car is back on the road without unnecessary delay. Make sure you select the right part first time and rely on a specialist that truly understands your vehicle's drivetrain inside out – choose CVJoint24 for your BMW 1 Serie 118 I E88.

Frequently asked questions about Drivetrain for BMW 1 Serie 118 I E88

How do I know if the drive shaft is faulty on my BMW 118 I E88?

The most common signs are clicking noises when cornering sharply or vibrations under acceleration. If the CV boot is split and grease has leaked out, there is a high risk that the CV joint has suffered damage.

Do all 1 Series propeller shafts fit my 118 I E88?

No, propeller shafts differ depending on gearbox type (manual or automatic) and engine variant. Always select your exact make, model and engine to ensure the correct length and mounting.

Why has the ABS light come on in my BMW E88?

A very common fault on the BMW 1 Series is that the ABS ring on the drive shaft corrodes and swells, causing the sensor to receive incorrect readings or become damaged. Replacing the ring often resolves the issue.

Can I replace just the ABS ring, or do I need to replace the entire drive shaft?

On the BMW 1 Serie 118 I E88, it is often perfectly feasible to replace solely the ABS ring if the drive shaft itself and its joints are otherwise in good condition, which is a significantly more cost-effective solution.

How quickly do you deliver drivetrain parts for BMW?

We dispatch quickly across Europe from our central Swedish warehouse, keeping most in-stock BMW 1 Series parts ready for swift delivery.

What does the fitment guarantee mean for my BMW 1 Series?

Our fitment guarantee means that if you choose your car's correct make, model and engine variant and the component unexpectedly does not fit, we will assist you promptly to exchange it for the right part without hassle.