BMW 1 Serie 118 I F20

Drivetrain parts and components for BMW 1 Serie 118 I F20. Select your exact make, model and engine to guarantee fitment before ordering.

Products for BMW 1 Serie 118 I F20

19 products
1 - 19 of 19
Item no.:4128936
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 739 mm
  • Joint diameter: 90 mm
Item no.:5110026
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 793 mm
  • Joint diameter: 90 mm
Item no.:7316045
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 748 mm
  • Joint diameter: 77 mm
Item no.:7316047
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 751 mm
  • Joint diameter: 84 mm
Item no.:5158197
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 805 mm
  • Joint diameter: 77 mm
Item no.:7281288
  • Total length: 1,415 mm
  • Number of joints: 3
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 16 mm
Item no.:0811932
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:6507644
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 28
  • Outer diameter: 90 mm
Item no.:690441
  • Position: Rear
Item no.:697428
  • Position: Rear
Item no.:648732
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 25
  • Seal diameter: 57,4 mm
  • Total length: 133 mm
Item no.:629648
  • Position: Rear
  • Total length: 1,440 mm
Item no.:643704
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 43,9 mm
  • Total length: 147 mm
  • Outer splines: 27
Item no.:0604023
  • Total length: 97 mm
Item no.:0671139
  • Total length: 98 mm
Item no.:642968
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 44 mm
  • Joint diameter: 74 mm
  • Outer splines: 27
Item no.:657829
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 57,2 mm
  • Outer splines: 28
  • Thread size: M24X1,5

Drivetrain for BMW 1 Serie 118 I F20

The BMW 1 Serie 118 I F20 is a model that combines German engineering with a compact, sporty driving experience. Maintaining these dynamic characteristics calls for a drivetrain in peak condition. The drivetrain is the system that transfers power from the engine to the wheels, and on a BMW 1 Serie it is finely tuned to deliver maximum responsiveness. As driveline specialists, we stock an extensive range of components selected specifically to satisfy the high demands of the F20 platform. Whether you need to replace a worn drive shaft or an unbalanced propeller shaft, we supply the parts that ensure efficient, loss-free power transmission.

Our focus is on providing components that not only fit physically, but also match original equipment specifications for torque and durability. Choosing the correct parts extends the service life of the entire car and avoids consequential damage to the gearbox and differential. We ensure you have access to dependable spare parts for your 118i, backed by our commitment to quality and lasting performance.

How the drivetrain is configured on the BMW 1 Serie 118 I F20

The BMW 1 Serie 118 I F20 is defined by its classic rear-wheel-drive layout, a central part of the car's driving appeal. Power generated by the longitudinal engine is channelled through the gearbox into a propeller shaft. This prop shaft runs along the underside of the vehicle and transmits rotation to the rear differential. From the differential, power is distributed to the rear wheels via two drive shafts. This setup requires every link in the chain to be balanced perfectly to prevent unwanted vibration and noise.

The drive shafts on an F20 are fitted with CV joints that allow the suspension to travel freely while maintaining constant power delivery. Because the 118i model features a specific weight distribution and torque curve, proper dimensioning of these shafts is essential. An incorrect or undersized part can quickly suffer from material fatigue. By understanding this complex setup, we supply parts that preserve the factory balance of your BMW's power delivery system.

Common faults and symptoms

When the drivetrain on a BMW 1 Serie 118 I F20 begins to wear out, it typically produces distinct physical symptoms. One of the most frequent indicators of a failing drive shaft is a clicking or knocking sound on full steering lock or when accelerating from a standstill. This is often caused by grease escaping past a split CV boot, leading to severe friction and wear inside the constant velocity joint. If you notice a shudder that builds with road speed, it frequently points to an unbalanced propeller shaft or a degraded centre bearing.

Another symptom to watch out for is vibration that occurs primarily under hard acceleration. This usually indicates wear in the inner CV joints. BMW owners should address these warning signs promptly: unaddressed vibrations can cause premature wear to gearbox or differential bearings, resulting in far more costly repairs. Regularly checking boot condition and listening out for unusual noises can prevent major driveline breakdowns.

Common replacement parts for BMW 1 Serie 118 I F20

For the BMW 1 Serie 118 I F20, drive shafts and propeller shafts account for the vast majority of driveline maintenance. We understand the specific requirements of this model and stock multiple drive shaft and prop shaft variants to cover technical differences across the range. A propeller shaft for the BMW 1 Serie 118 I F20 is a precision assembly that often needs replacing as a complete unit if the universal joints or centre bearing fail, as these parts are balanced as a single assembly.

Alongside complete shafts, CV boots are a very common maintenance item. These small yet vital rubber components keep grease in and protect delicate CV joints from road grime and moisture. Replacing a boot in good time is an economical safeguard against having to fit a whole new driveshaft later. We also recommend renewing bolts and fasteners when working on driveline assemblies, as these are often single-use stretch bolts on modern BMW models to guarantee correct tightening torques and safety.

Find the right part for your BMW 1 Serie 118 I F20

Browse directly to the relevant subcategory for your BMW 1 Serie 118 I F20:

When troubleshooting driveline problems, navigating straight to the right category saves time. Comparing the specific sections for the BMW 1 Serie 118 I F20 makes it easier to pinpoint whether the issue lies with a drive shaft, CV joint or propeller shaft, taking you directly to the correct fitment.

Our catalogue is continually updated with technical data to ensure you find the right parts for your BMW every time.

Why shop at CVJoint24

CVJoint24 is no ordinary car-parts retailer; we are the international arm of a Swedish driveline specialist, focused exclusively on power transmission components. When you order from us, you benefit from dedicated expertise rarely found at general automotive factors. We offer an accurate fitment guarantee, so you can order with absolute confidence that the parts will match your BMW 1 Serie 118 I F20. We focus on providing high-quality parts with fast EU-wide dispatch from our central Swedish warehouse, because we understand that off-the-road delays cause serious disruption.

Choosing CVJoint24 for your driveline parts gives you correct specifications alongside support from specialists who know drivelines inside and out. By combining an extensive inventory with technical knowledge, we are the natural choice for BMW owners. With dependable fitment and prompt delivery, we help you keep your vehicle driving precisely as BMW intended.

Frequently Asked Questions about Drivetrain Parts for BMW 1 Series 118 I F20

How do I know if my BMW 1 Series 118 I F20 needs a new drive shaft?

The most common signs are clicking noises when cornering, vibrations during acceleration, or visible grease leaking from the CV boots. If you notice any of these symptoms, you should inspect the drive shafts immediately.

Do all propeller shafts fit every BMW 1 Series model?

No, propeller shafts are specific to the engine variant, gearbox type, and model year. For the 118i F20, there are 3 specific variants. Always filter by your make, model, and engine to ensure the correct fitment.

What does your fitment guarantee mean for drivetrain parts?

Our fitment guarantee means that if you select your BMW 1 Series 118 I F20 by make, model, and engine variant and the part unexpectedly fails to fit, we will help you exchange it for the correct component at no extra cost.

Can I replace just the CV joint, or do I need to replace the entire drive shaft?

On many BMW models, including the F20, it is often most cost-effective and dependable to replace the entire drive shaft, particularly if wear is advanced. We supply complete drive shafts to make fitting straightforward.

Why does my car vibrate at high speeds?

Vibrations at higher speeds in a rear-wheel-drive car such as the 118i F20 are often caused by an imbalance in the propeller shaft or a worn centre bearing. Worn inner CV joints can also cause similar symptoms.

How quickly do you deliver parts for the BMW 1 Series?

We aim for next-day dispatch on all in-stock parts. If you order early on a weekday, your drivetrain components are normally dispatched the same day from our Swedish warehouse.