BMW 1 Serie 120 D E87

Welcome to CVJoint24, the international store of a Swedish driveline specialist supplying BMW 1 Serie 120 D E87 drivetrain parts. We offer an extensive, carefully vetted range of...

Products for BMW 1 Serie 120 D E87

29 products
25 - 29 of 29
Item no.:510702
  • Splines wheel side: 27
  • Total length: 667 mm
  • Joint diameter, gearbox side: 100 mm
  • Thread size: M24x1.5
Item no.:692494
  • Position: Rear
Item no.:411681
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:516367
  • Splines wheel side: 27
  • Total length: 665 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:417207
  • Splines wheel side: 27
  • Total length: 611 mm
  • Joint diameter, gearbox side: 100 mm
  • Seal ring diameter: 69 mm
Showing 25–29 of 29 products

Drivetrain for BMW 1 Serie 120 D E87

The BMW 1 Serie 120 D E87 is renowned for its sheer driving pleasure and an efficient diesel engine delivering substantial torque. To preserve that dynamic driving experience and ensure all that power reaches the road effectively, your drivetrain must be in peak condition. The transmission of power in this model relies on a complex chain of components working together to transfer torque from the longitudinal engine back to the rear wheels. At CVJoint24, you will find a dedicated range tailored specifically to the 120 D variant of the E87 generation, engineered to withstand the demanding forces of this high-torque diesel powertrain.

We understand the importance of precision when choosing replacement parts for BMW vehicles, where tolerances are exceptionally tight and durability expectations are high. Selecting the correct components protects your vehicle's performance and secures long-term mechanical reliability. We focus on providing parts that meet or exceed original equipment specifications, giving you complete confidence on every journey. With our comprehensive selection for this specific model, we cover virtually every requirement for drivetrain repairs and complete overhauls.

How the drivetrain is engineered on the BMW 1 Serie 120 D E87

The drivetrain architecture of the BMW 1 Serie 120 D E87 adopts BMW's classic rear-wheel-drive configuration, delivering its celebrated 50:50 balance and precise steering feedback. The engine is mounted longitudinally, routing power through the gearbox and along a propeller shaft directly to the rear differential. From the differential, power is split to the rear wheels via two robust drive shafts. While durable, this layout features several critical wear points that encounter high stress over time, particularly under the heavy torque loads of the 120 D engine.

The prop shaft is central to this setup and is typically split into sections supported by a centre bearing. This bearing damps drivetrain vibrations and keeps the shaft properly aligned while rotating at high speeds. The drive shafts at the rear wheels feature both inner and outer CV joints, allowing the rear suspension to articulate freely while delivering uninterrupted, smooth power delivery. Understanding this layout is key to diagnosing faults accurately and choosing the correct car parts whenever driveline play or noise emerges.

Common faults and symptoms

Drivetrain symptoms vary depending on the affected component, but they should never be neglected. One of the most typical indicators of a worn outer CV joint is a rhythmic clicking or knocking noise when cornering tightly at lower speeds. If you experience shuddering or vibrations during hard acceleration or at specific motorway speeds, a worn inner CV joint or an out-of-balance propeller shaft is often the cause. For the BMW 1 Serie 120 D E87, pay close attention to any whining or droning sounds coming from the centre tunnel, which frequently points to a failing propeller shaft centre bearing.

Another common fault with the E87 platform is an illuminated ABS warning light or erratic ABS activation during light, normal braking. This is typically triggered by a corroded or fractured ABS ring on the rear axle, which distorts the wheel speed signal to the sensor. Addressing these symptoms promptly prevents secondary, expensive damage. A split drive shaft boot that leaks grease can ruin an entire constant velocity joint in very little time due to dirt ingress and moisture, making regular visual inspections of all rubber boots a sensible habit.

Frequent replacements for BMW 1 Serie 120 D E87

When repairs are due, certain parts are replaced more often than others on this model. We have structured our catalogue so you can quickly pinpoint precisely what your BMW 1 Serie 120 D E87 requires. Here are the core component groups available:

  • Drive shaft for BMW 1 Serie 120 D E87 – complete shafts for straightforward replacement.
  • Outer CV joint for BMW 1 Serie 120 D E87 – to resolve clicking noises when turning.
  • Inner CV joint for BMW 1 Serie 120 D E87 – to eliminate vibration under acceleration.
  • Propeller shaft for BMW 1 Serie 120 D E87 – premium central power transmission.
  • Centre bearing for BMW 1 Serie 120 D E87 – for smooth, vibration-free running.
  • ABS ring for BMW 1 Serie 120 D E87 – a cost-effective fix for ABS warning faults.

By supplying these precision-fit parts, we ensure every component can comfortably handle the torque output of the 120 D engine. Fitting a complete driveshaft often saves valuable workshop hours over rebuilding worn joints, while replacing a cracked ABS reluctor ring individually saves substantial cost compared to purchasing an entire new shaft assembly.

Find the right part for your BMW 1 Serie 120 D E87

Navigate directly to the required section for your BMW 1 Serie 120 D E87:

On a vehicle with several interdependent drivetrain elements, heading straight to the right subcategory is the easiest way to diagnose faults accurately. By assessing the specific product categories for the BMW 1 Serie 120 D E87, you can readily distinguish between drive shaft, CV joint and prop shaft issues to find the exact replacement required.

Locating the correct component for a BMW 1 Serie 120 D E87 can seem complex given subtle technical revisions across production years. The most reliable method to verify compatibility is selecting your exact make, model and engine variant in our store selector. This narrows the parts catalogue to show only the components engineered for your vehicle's specific running gear. This is particularly crucial on the 120 D, as it frequently features beefier transmission components than smaller-engined 1 Series models.

We also advise checking physical dimensions where possible, such as tooth counts on an ABS ring or overall drive shaft length, as differences can exist between manual and automatic transmissions. Our database is built to surface the right parts right away, minimising the chance of incorrect orders. If you ever need guidance, our specialist team is on hand to help you verify technical data and secure the right part to get your BMW back on form.

Why choose CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We focus on this dedicated niche to deliver technical expertise that general car-parts retailers simply cannot match. Shopping with us means obtaining premium components backed by our accurate fitment guarantee. We understand your BMW 1 Serie 120 D E87 is vital to your day-to-day routine, so we prioritise prompt EU-wide shipping to keep workshop downtime to an absolute minimum.

Our catalogue is handpicked for outstanding build quality, delivering dependable parts at competitive prices. With comprehensive knowledge covering drive shafts, constant velocity joints and ABS rings, we are the trusted supplier for both DIY mechanics and professional garages seeking dependable components. We combine the extensive range of a major supplier with the technical insight and personal care of a dedicated specialist, making us your prime destination for BMW drivetrain solutions.

Frequently Asked Questions about Drivetrain Parts for BMW 1 Series 120 d E87

How do I know if my BMW 120 d E87 needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises from the rear end. If you hear a clicking sound when cornering, the outer CV joint is usually worn, and fitting a complete drive shaft can often be the most straightforward solution.

Can I replace just the ABS ring on my BMW 1 Series?

Yes, this is a very common and cost-effective repair on the E87 model. Instead of replacing the entire drive shaft when the ABS system malfunctions, you can often press on a new ABS ring, which we supply as an individual spare part.

Why does my BMW 120 d vibrate at motorway speeds?

Vibrations at higher speeds can often be traced to an unbalanced propeller shaft or a worn centre bearing. They can also stem from wear in the inner CV joints located closest to the differential.

Does the same drive shaft fit all BMW E87 models?

No, the 120 d often has sturdier drive shafts and joints than, for instance, a 116i or 118i due to the higher engine torque. Always select your car by its specific make, model and engine variant to find the correct part.

What is the advantage of buying parts from a specialist such as CVJoint24?

As dedicated driveline specialists, we possess in-depth technical knowledge, provide a guaranteed fit, and maintain a range verified specifically for your BMW, significantly minimising the risk of ordering incorrect car parts compared to general retailers.

How quickly can I receive my spare parts?

We work to dispatch your order swiftly so that you can get your car back on the road without delay. All orders are processed and shipped efficiently from our Swedish warehouse.