BMW 1 Serie 135 I E88

Spare parts and drivetrain components for BMW 1 Serie 135 I E88. Select your make, model and engine to ensure correct fitment before ordering.

Products for BMW 1 Serie 135 I E88

24 products
1 - 24 of 24
Item no.:0387651
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:4120205
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0266275
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:628001
  • Position: Rear
  • Total length: 1,355 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 105 mm
Item no.:0877054
  • Inner diameter: 35 mm
  • Bearing thickness: 14 mm
  • Hole spacing c/c: 160 mm
Item no.:0836826
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:415379
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 611 mm
  • Joint diameter: 93,8 mm
  • Joint diameter, gearbox side: 111,3 mm
Item no.:515516
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 665 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:6589181
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:0441618
  • Position: Rear, Inner
  • Inner splines: 28
  • Outer diameter: 100 mm
Item no.:519123
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 663 mm
  • Joint diameter, gearbox side: 100 mm
  • Diameter 1: 94 mm
Item no.:511118
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:613318
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 653 mm
  • Joint diameter: 95 mm
  • Joint diameter, gearbox side: 106 mm
Item no.:613317
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 660 mm
  • Joint diameter, gearbox side: 100 mm
  • Flange diameter: 100 mm
Item no.:649649
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:512983
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 663 mm
  • Joint diameter, gearbox side: 102 mm
Item no.:411774
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:0955456
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:696846
  • Position: Rear
Item no.:692267
  • Position: Rear
Item no.:0676488
  • Position: Rear
Item no.:696050
  • Position: Rear

Drivetrain for BMW 1 Serie 135 I E88

The BMW 1 Serie 135 I E88 is a car that combines compact agility with impressive power. To ensure this power reaches the tarmac efficiently and safely, a drivetrain in peak condition is essential. As the owner of a 135i, you know that precision is key, and that applies just as much to the mechanical components beneath the car. At CVJoint24, we specialise in precisely these parts, from the smallest ABS ring for BMW 1 Serie 135 I E88 to complete drive shafts. By focusing on quality and exact fitment, we help you maintain the sheer driving pleasure BMW is renowned for. Our range is tailored to meet the demanding requirements of a vehicle with the substantial torque output this model possesses.

How the drivetrain is configured on the BMW 1 Serie 135 I E88

The layout of the drivetrain on a rear-wheel-drive BMW 1 Serie 135 I E88 is a masterclass in German engineering. Power is generated by the engine and delivered rearwards via the gearbox through a robust propeller shaft for BMW 1 Serie 135 I E88. This shaft is balanced to minimise vibration and transmit torque smoothly to the rear differential. From the differential, power is distributed to the wheels via two heavy-duty drive shafts. As the E88 is the convertible version of the 1 Series, specific demands are placed on chassis and drivetrain rigidity. Every component, including the integrated ABS rings that read wheel speed, must operate in perfect harmony for the stability systems and power delivery to function optimally in all driving conditions.

Common faults and symptoms

There are several signs that drivetrain components are starting to fail on a BMW 1 Serie 135 I E88. One of the most frequent symptoms is vibration felt through the body during acceleration, which can often be traced to imbalance or wear in the propeller shaft or its centre bearing. If you hear a clicking noise during tight turns or when pulling away, this frequently indicates that a drive shaft for BMW 1 Serie 135 I E88 or its joints are becoming worn. Another common issue on cars driven on European roads is an illuminated ABS warning light. This often occurs because the ABS ring has corroded or cracked, disrupting the sensor signal. Ignoring these warning signs can result in costly consequential damage and compromised road safety.

Common parts to replace on the BMW 1 Serie 135 I E88

For the BMW 1 Serie 135 I E88, we see consistent demand for specific spare parts that are vital to the car's operation. The components most frequently requiring replacement include drive shafts, prop shafts and ABS rings. Due to the high torque, the rear driveshafts are subjected to considerable stress over time. The propeller shaft is central to power delivery and is often the source of driveline vibration if universal joints or bearings deteriorate. The ABS ring is a small yet crucial part that frequently needs replacing due to corrosion from winter road salt. By choosing the right parts from the outset, you ensure your BMW maintains its performance. We provide specific components for this exact model variant, ensuring you find precisely what you require for your drivetrain repair.

How to find the right part for your BMW 1 Serie 135 I E88

Proceed to the relevant category for your BMW 1 Serie 135 I E88:

On a car with several potential drivetrain issues, starting in the right category saves time. By comparing the exact part sections for the BMW 1 Serie 135 I E88, it becomes straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, allowing you to proceed to the page that best matches your symptoms and fitment needs.

By browsing through these links, you can review technical specifications and select the component that best fits your requirements. We always recommend checking both the left and right sides when replacing drive shafts to ensure balanced performance and long service life from your repair.

Why shop at CVJoint24

When you choose to buy from CVJoint24, you are buying from a Swedish driveline specialist with exceptional depth across the entire drivetrain range. We understand the technical nuances of marques like BMW and specific models such as the BMW 1 Serie. Our priority is supplying parts with an exact fit, supported by our reliable fitment guarantee. We know that when your car is on the ramp, time is of the essence; that is why we offer fast delivery across the EU to get your components to you as swiftly as possible. Guided by our principle of getting the right part first time, we eliminate ordering errors through precise product data and intuitive search tools. With us, you always receive the right product at the right price, backed by expertise generic car parts retailers often lack.

Frequently asked questions about drivetrain parts for BMW 1 Series 135 i E88

How do I know that the drive shaft will fit my BMW 1 Series 135 i E88?

The most reliable way is to select your vehicle by make, model and engine variant in our search filter. This ensures you only see components with a guaranteed fit for your specific 135i E88.

What are the most common signs of a failing propeller shaft on this model?

The most common symptoms are vibrations through the cabin or chassis, particularly under acceleration or at specific speeds, as well as abnormal noises from underneath the vehicle.

Can I replace just the ABS ring or do I have to replace the entire drive shaft?

On the BMW 1 Series 135 i E88, you can often replace just the ABS ring if it has cracked or corroded, which is a significantly more cost-effective solution than replacing the complete drive shaft.

Why does my BMW 135i vibrate under hard acceleration?

This is frequently caused by wear in drivetrain components, such as worn inner CV joints or an unbalanced prop shaft, which becomes especially noticeable under the high torque delivered by the 135i engine.

How quickly do you deliver parts for the BMW 1 Series?

We aim for fast dispatch on all stocked items so that you can get your car back on the road as quickly as possible.

What does your fitment guarantee mean?

Our fitment guarantee means that when you select your vehicle by make, model and engine variant, we guarantee the part will fit. If it unexpectedly does not, we will help you find the correct part at no extra cost.