BMW 2 Gran Tourer 218 D

Welcome to CVJoint24, the international shop of a Swedish driveline specialist providing premium drivetrain components for the BMW 2 Gran Tourer 218 D. We understand the importance of...

Products for BMW 2 Gran Tourer 218 D

7 products
1 - 7 of 7
Item no.:116853
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:215940
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 905 mm
  • Joint diameter: 92 mm
Item no.:7301606
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 31
  • Total length: 931 mm
Item no.:0121616
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:2131427
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 904 mm
Item no.:216090
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:118758
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 541 mm

Drivetrain for BMW 2 Gran Tourer 218 D

The BMW 2 Gran Tourer 218 D is a vehicle that combines practical versatility with the driving pleasure expected of a BMW. To keep this driving experience intact, your drivetrain must remain in top condition. As a diesel variant delivering substantial torque for both urban commutes and long family journeys, the power transmission system is exposed to continuous stress. The drivetrain is responsible for transferring the engine's power to the road wheels, and every single component plays a decisive role in the car's stability and efficiency. With us, you will find parts specifically selected to match the technical requirements of the 218 D model, ensuring durability and optimal performance.

Maintaining the drivetrain on a modern car like this is not simply about replacing parts once they fail; it is about preventing major breakdowns by choosing the right quality from the start. At CVJoint24, we are specialists in these precise components and supply a range that covers the most critical needs for your vehicle. By focusing on specialist knowledge, we ensure that the car parts we supply meet the rigorous demands expected of a premium vehicle.

How the drivetrain is engineered on the BMW 2 Gran Tourer 218 D

The architecture of the drivetrain in the BMW 2 Gran Tourer differs significantly from the brand's traditional rear-wheel-drive platforms. This model is built on a front-wheel-drive architecture featuring a transverse engine. This means the power produced by the 218 D engine travels via the gearbox directly to the front wheels through two drive shafts. Each drive shaft comprises an inner joint fitted to the gearbox and an outer joint positioned at the wheel hub. The inner joint is engineered to accommodate the plunge movements that occur as the suspension travels, whilst the outer constant velocity joint enables the front wheel to steer smoothly while transmitting drive.

Because the 218 D is equipped with a high-torque diesel engine, the drive shafts are dimensioned to withstand high loads under acceleration. The system also includes CV boots that protect the joints from road grime and moisture while keeping lubricating grease sealed inside. A reliable drivetrain on this model depends on all these components working together seamlessly without play or leaks. Understanding this front-wheel-drive configuration is key to diagnosing symptoms accurately and knowing which parts to check during servicing or repairs.

Common faults and symptoms

Several warning signs suggest that the drivetrain on your BMW 2 Gran Tourer 218 D requires attention. One of the most typical symptoms is a rhythmic clicking or knocking noise heard when turning sharply under acceleration. This is almost invariably a symptom of a worn outer CV joint. If you experience vibrations through the vehicle body or steering wheel instead, particularly under load at higher speeds, it often indicates excessive play in an inner CV joint or an unbalanced driveshaft.

Another frequent issue is split CV boots. When a boot tears, grease is rapidly expelled by centrifugal force, leaving the precision joint unlubricated. Without adequate grease and exposed to road dirt, the internal bearings wear out very quickly. For this reason, it is prudent to inspect the drive shaft boots during every oil service or tyre rotation. Catching a split boot early can save significant expense, as fitting a replacement CV boot kit in good time avoids having to replace the entire drive shaft. Unusual noises and vibrations should never be neglected, as they can cause secondary damage to the gearbox and wheel bearings.

Common replacement parts for the BMW 2 Gran Tourer 218 D

When carrying out drivetrain repairs on this model, certain components require replacement more often than others due to everyday wear and tear. The drive shaft is the central component, and replacing it as a complete assembly is often the best way to ensure both the inner and outer joints are in pristine condition. This approach is frequently more cost-effective than rebuilding individual joints, reducing garage labour costs and ruling out hidden damage on the original shaft.

For the BMW 2 Gran Tourer 218 D, the following category is the most relevant when maintaining the power transmission:

  • Drive shaft BMW 2 Gran Tourer 218 D

In addition to complete shafts, individual CV joints and boot kits are commonly needed spare parts. When fitting these components, it is essential to use fresh hardware such as new hub bolts and circlips, which are included in our complete kits. Selecting the exact part for your 218 D is vital, as shaft lengths and spline counts can differ depending on whether the car uses a manual or automatic gearbox, as well as the exact production date.

Find the right part for your BMW 2 Gran Tourer 218 D

Proceed to the appropriate product subcategory for your BMW 2 Gran Tourer 218 D:

When diagnosing drivetrain problems, starting in the correct category saves valuable time. By comparing the specific subcategories for the BMW 2 Gran Tourer 218 D, you can easily distinguish between issues with drive shafts, CV joints or propeller shafts, leading you directly to the parts that match your vehicle's symptoms and fitment.

If you are unsure about any technical specification, such as the tooth count on an ABS ring or overall shaft length, our customer support team is on hand to assist. We want you to find the correct replacement the first time, saving both time and money whether you are a DIY mechanic or running a garage. Our database is updated continuously to ensure dependable precision for your BMW model.

Why buy from CVJoint24?

CVJoint24 is not merely another general motor factor; we are the international shop of a Swedish driveline specialist, sending parts directly from our central warehouse in Helsingborg, Sweden across the European Union. When ordering from us, you benefit from specialist knowledge that general retailers rarely provide. We know precisely what is required for a drive shaft on a BMW 2 Gran Tourer 218 D to perform reliably, and we never compromise on product quality. Our commitment is to deliver the right component at a competitive price.

We provide a reliable shopping experience with an accurate fitment guarantee when you select your vehicle's make, model and engine variant. Backed by efficient logistics, we process orders swiftly so you receive your parts without unnecessary waiting. This is crucial when the vehicle is booked into the garage and you need it back on the road quickly. By choosing us, you partner with a specialist who understands your car's technical demands and prioritises your vehicle's dependability.

Frequently Asked Questions about Drivetrain Parts for BMW 2 Gran Tourer 218 D

How do I know if the drive shaft on my BMW 2 Gran Tourer 218 D is faulty?

The most common signs are clicking noises when cornering (outer CV joint) or vibrations under acceleration (inner CV joint/shaft). You should also check whether the CV boots are cracked or leaking grease.

Does the same drive shaft fit all BMW 2 Series models?

No, drive shafts are specific to the engine variant and gearbox. The 218 D has unique specifications compared to petrol models or four-wheel-drive xDrive variants.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is straight and undamaged, you can replace just the inner or outer CV joint. However, replacing the complete drive shaft is often more time-efficient.

What does the fitment guarantee at CVJoint24 mean?

It means that when you select your vehicle's make, model and engine, and order the recommended part, we guarantee that it will fit your BMW 2 Gran Tourer 218 D.

How quickly can I have my spare parts delivered?

We dispatch quickly from our central warehouse so that you can get your car repaired without delay.

Why is it important to inspect the CV boots on my BMW?

The CV boot protects the CV joint. If it splits, dirt enters and grease leaks out, causing the joint to wear out very quickly and requiring a complete replacement.