BMW 2 Monocab

Welcome to your dedicated specialist for BMW 2 Monocab drivetrain components. When your car's power transmission shows signs of wear, fitting exact-match components is vital to restore...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 2 Monocab

13 products
1 - 13 of 13
Item no.:115420
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:210518
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 905 mm
  • Joint diameter: 92 mm
Item no.:7301605
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 31
  • Total length: 931 mm
Item no.:0111574
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:1186139
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 31
  • Total length: 546 mm
Item no.:2121374
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 904 mm
Item no.:216303
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:117449
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 541 mm
Item no.:149174
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 34
  • Total length: 151 mm
Item no.:449686
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 43,75 mm
  • Total length: 188 mm
  • Outer splines: 27
Item no.:453088
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm
Item no.:449210
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 43,75 mm
  • Total length: 188 mm
  • Outer splines: 27
Item no.:452991
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm

Drivetrain for BMW 2 Monocab

The BMW 2 Monocab represents a unique part of BMW's model range, prioritising space and practicality without compromising on the brand's renowned driving dynamics. Maintaining these dynamics demands a drivetrain in peak condition. The drivetrain is the complex system that transfers power from the engine to the wheels, and on a BMW 2 Monocab, this system is engineered for both efficiency and responsiveness. Whether your car is front-wheel drive or fitted with xDrive all-wheel drive, the power transmission components are subjected to significant stress under every acceleration and turn. Looking after these components is not merely a matter of ride comfort, but also of safety and the vehicle's long-term durability. At CVJoint24, we understand the technical demands of this specific model and offer the expertise required to keep your car on the road with the correct car parts. Selecting the right parts ensures power reaches the road smoothly, without loss of traction or unwanted noises.

How the drivetrain is engineered on the BMW 2 Monocab

The layout of the drivetrain on a BMW 2 Monocab differs from many traditional BMW models due to its architecture. Here, you typically find a transverse engine driving the front wheels, which places specific demands on drive shaft length and operating angles. The system comprises a gearbox that delivers power via a drive shaft for BMW 2 Monocab to each front wheel. Each drive shaft is equipped with two joints: an inner joint adjacent to the gearbox and an outer joint at the wheel hub. These joints allow the wheels to move up and down with the suspension and steer while continuously transferring engine torque. On xDrive models, a propeller shaft and rear drive shafts are added, creating a more complex system. Understanding this configuration is key to identifying where a fault originates and which component requires replacement. Precision engineering in these components is vital to prevent vibrations and premature wear on adjacent components.

Common faults and symptoms

Several distinct warning signs indicate that your BMW 2 Monocab drivetrain is wearing out. One of the most typical symptoms is a clicking or knocking noise when turning sharply at low speeds, which usually points to a worn outer CV joint on a BMW 2 Monocab. If you experience vibrations through the car body under acceleration instead, this often indicates wear or imbalance in an inner CV joint on a BMW 2 Monocab. It is equally important to inspect the CV boots regularly; if a boot splits, the lubricating grease escapes and road dirt penetrates, quickly ruining the constant velocity joint. Other signs can include oil leaks at the gearbox seals or an unsettled feel through the steering wheel at motorway speeds. Ignoring these early signs can cause severe damage to the gearbox or leave you stranded, making prompt diagnosis essential to prevent costly secondary repairs.

Common replacement parts for BMW 2 Monocab

Within our range for the BMW 2 Monocab, certain parts are consistently in high demand. We stock multiple variations of complete drive shafts, covering the majority of engine options and gearbox configurations for this model. Alongside complete shafts, we supply standalone outer CV joints and inner CV joints. Replacing solely a CV joint can be a cost-effective solution if the shaft itself remains undamaged. However, many customers and garages opt to fit a complete driveshaft to save labour time during installation and ensure all components are brand new. Deciding between a single joint or a complete shaft often depends on the extent of wear and your vehicle maintenance plans. Whatever you choose, fitting components that meet original equipment specifications is vital to preserve the car's driving characteristics and safety. Our catalogue is tailored to serve both DIY mechanics and professional garages.

How to find the correct parts for your BMW 2 Monocab

Navigate directly to the relevant subcategory for your BMW 2 Monocab:

When troubleshooting drivetrain issues, starting in the precise subcategory saves valuable time. By comparing the dedicated product groups for the BMW 2 Monocab, you can readily distinguish between drive shaft, CV joint or propeller shaft issues and proceed to the parts matching your symptoms and specifications.

These links take you straight to the exact components engineered for your vehicle's drivetrain. We always recommend confirming that your chosen part matches the original item on your car, especially where multiple versions exist across model years. Our catalogue is continuously updated to ensure our vehicle recommendations remain precise.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden. We focus exclusively on our driveline niche rather than trying to stock everything, providing you with deep technical expertise and an exceptionally detailed catalogue. When you purchase from us, you get premium spare parts alongside the reassurance of our accurate fitment standards. We know your time matters, which is why we offer fast shipping on stocked items across the EU, helping get your BMW 2 Monocab back on the road without delay. Our goal is to ensure you identify the right component the first time and receive reliable parts delivered directly to your home or workshop. With a strong commitment to quality and technical support, CVJoint24 is the trusted choice for drivers who demand the very best for their car's drivetrain.

Frequently Asked Questions about BMW 2 Monocab Drivetrain Parts

How do I know if my BMW 2 Monocab needs a new drive shaft?

The most common symptoms are vibrations under acceleration or unusual noises while driving. If the vibrations can be felt throughout the car, it is often the inner joint or the shaft itself that is worn.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft itself is straight and undamaged, you can replace just the inner or outer CV joint. We offer both complete shafts and separate joints for the BMW 2 Monocab.

What is the difference between the inner and outer CV joint on a BMW 2 Monocab?

The outer joint sits at the wheel hub and accommodates steering angles, whilst the inner joint sits at the gearbox and absorbs suspension movement. A failing outer joint often produces clicking noises when cornering.

Do all drive shafts fit every BMW 2 Monocab model?

No, specifications vary depending on the engine, gearbox and whether the vehicle has xDrive. Always select your vehicle's exact make, model and engine to find the correct part.

How quickly are the parts for my BMW delivered?

We offer fast delivery on all in-stock items, meaning you will usually receive your parts within a few working days across Europe when ordering in good time.

Does the fitment guarantee apply when selecting my vehicle details?

Yes, when you use our vehicle selector to choose your exact model and engine, and select a recommended part, your purchase is covered by our fitment guarantee.