BMW 2 Serie 220 D F46

Welcome to your drivetrain specialist for the BMW 2 Serie 220 D F46. When the power delivery in your vehicle falters, finding precision-fit components is essential to restore its driving...

Products for BMW 2 Serie 220 D F46

11 products
1 - 11 of 11
Item no.:1152982
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:2154612
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 905 mm
  • Joint diameter: 92 mm
Item no.:0532091
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 31
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:0111358
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:0178625
  • Splines gearbox side: 24
  • Splines wheel side: 31
  • Total length: 533 mm
Item no.:2123587
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 904 mm
Item no.:142071
  • Position: Front left, Inner
  • Inner splines: 28
  • Seal diameter: 33 mm
  • Outer splines: 28
Item no.:248694
  • Position: Front right, Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Seal diameter: 33 mm
  • Total length: 531,5 mm
Item no.:214632
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:0604818
  • Total length: 126 mm
Item no.:0959429
  • Diameter: 39 mm

Drivetrain for BMW 2 Serie 220 D F46

The BMW 2 Serie 220 D F46 is a car model that combines practicality with BMW's signature driving pleasure. Maintaining this balance demands a drivetrain in peak condition. The drivetrain on this specific model, especially in 220 D specification, handles substantial torque from the diesel engine, placing high demands on every single component. Whether your car is front-wheel drive or equipped with xDrive all-wheel drive, the power transmission is the heart of the vehicle's mechanicals. Here at CVJoint24, you will find a dedicated range tailored precisely for your BMW 2 Serie 220 D F46. We understand the importance of precision and durability when it comes to parts such as drive shafts and joints. Choosing the right spare parts not only ensures your car's operational reliability, but also protects its resale value and road safety. Our focus is on supplying components that meet or exceed original equipment specifications, giving you peace of mind over every kilometre you drive.

How the drivetrain is engineered on the BMW 2 Serie 220 D F46

The BMW 2 Serie 220 D F46 is built on a modern architecture with a transverse engine layout, marking a departure from the brand's historic rear-wheel-drive heritage. This means the drivetrain is compact and neatly packaged within the front end. Power flows from the engine through the gearbox to the drive shafts, which in turn transfer rotational energy to the wheels. Each drive shaft for BMW 2 Serie 220 D F46 is fitted with two joints: an inner joint facing the gearbox and an outer joint at the wheel hub. The outer constant velocity joint is particularly sophisticated, as it must transmit torque smoothly while the wheel steers and moves up and down with the suspension. On xDrive models, a transfer box and a propeller shaft also send drive to the rear wheels, making the system more intricate. Understanding this layout is essential for diagnosing potential issues early, before they cause expensive secondary damage to the transmission system.

Common faults and symptoms

There are several clear warning signs that the drivetrain in your BMW 2 Serie 220 D F46 is beginning to wear. One of the most typical symptoms is a clicking or knocking noise heard when making sharp turns at low speed. This usually indicates that an outer CV joint for BMW 2 Serie 220 D F46 is failing, often due to a torn CV boot that has allowed road dirt to enter. Another frequent symptom is vibration felt throughout the cabin during acceleration. This can point to an out-of-balance drive shaft or excessive wear in an inner joint. If you notice grease splattered across the inside of the wheel rim or around the wheel arch, it is a critical sign of a split boot. Left unaddressed, the lubricating grease will quickly escape, leading to complete joint failure. Ignoring these warning signs can leave you stranded, as a broken driveshaft stops power from reaching the wheels altogether.

Common replacement parts for the BMW 2 Serie 220 D F46

On the BMW 2 Serie 220 D F46, it is primarily the front axle components that require attention over time. In our range, we concentrate on the parts subjected to the greatest wear and tear that remain vital to your vehicle's operation. Here are the core categories for your model:

  • Drive shafts for BMW 2 Serie 220 D F46 – We supply drive shafts tailored to various fitting positions and exact specifications for your car.
  • Outer CV joints for BMW 2 Serie 220 D F46 – A vital component for steering and power delivery, available in high-quality replacement options.

Alongside these primary parts, it is always wise to inspect the CV boots and ABS rings whenever replacing driveline components. Because the 220 D engine delivers hefty low-end torque, replacement parts must be properly rated to endure high loads. Replacing a worn drive shaft with a high-grade replacement restores the smooth, vibration-free refinement typical of a well-maintained BMW.

How to find the right part for the BMW 2 Serie 220 D F46

Browse directly to the relevant component section for your BMW 2 Serie 220 D F46:

When diagnosing drivetrain faults, it is best practice to start directly in the correct product category. By comparing the specific subcategories for the BMW 2 Serie 220 D F46, you can easily distinguish between problems with a drive shaft, a CV joint or a prop shaft, and proceed to the section that best matches your symptoms and fitment needs.

Selecting the right spare part for an advanced vehicle like the BMW 2 Serie 220 D F46 can seem daunting due to multiple engineering revisions. Variations exist depending on gearbox type, build year and whether your car is equipped with xDrive or standard front-wheel drive. The most reliable method to pinpoint compatible parts is selecting your car's exact make, model and engine variant in our catalogue. You can also navigate manually through BMW 2 Serie directly to your engine specification. Always double-check technical details such as the spline count on the shaft and the overall length when carrying out a manual check. Our product database is continuously updated to ensure accurate specifications, minimising the risk of ordering the wrong part and avoiding unnecessary delays in the garage.

Why buy from CVJoint24?

When you choose CVJoint24, you partner with an international shop backed by a Swedish specialist in drivetrain components, shipping throughout the EU from our central warehouse in Helsingborg, Sweden. We do not merely supply car parts; we deliver proven expertise and reassurance. Our product line for BMW is thoroughly vetted to guarantee outstanding quality. We back our range with an exact-fit guarantee, ensuring that the parts you order fit your BMW 2 Serie 220 D F46 properly. Thanks to our streamlined dispatch processes, your order is handled quickly and efficiently, keeping downtime on the ramp to a minimum. Our technical customer support team is always ready to answer your questions. By combining specialist driveline know-how with extensive stock, we are the trusted source for both DIY mechanics and professional workshops who insist on reliable components.

Frequently asked questions about BMW 2 Series 220 D F46

How do I know if my BMW 220 D F46 needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises when cornering. If you notice the car shuddering at higher speeds or clunking under load, you should inspect the drive shafts immediately.

Do all BMW 2 Series drive shafts fit my 220 D F46?

No, there are significant differences between different engine variants and drivetrain setups (front-wheel drive vs xDrive). Always select your exact make, model and engine on cvjoint24.com to ensure you get the correct part for your specific F46 model.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits at the wheel hub and accommodates steering, whilst the inner joint sits at the gearbox and absorbs suspension movement. The outer joint typically wears faster due to the sharp angles experienced during steering.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early before dirt and grit have entered the joint, replacing just the CV boot may be sufficient. If the constant velocity joint has already started making noises, it is damaged and the complete joint or drive shaft should be replaced.

How does your fitment guarantee work for BMW parts?

Our fitment guarantee means that when you select your car by make, model and engine variant, we guarantee the part will fit. In the unlikely event that it does not, we will help you find the correct part at no extra cost.

How quickly can I have my parts delivered?

We offer fast delivery across the EU for most in-stock products for the BMW 2 Series 220 D F46, dispatched directly from our Swedish central warehouse.