BMW 2 Serie 220 D Xdrive F45

Spare parts and drivetrain components for BMW 2 Serie 220 D Xdrive F45. Select your vehicle make, model and engine to ensure the correct fit before ordering.

Products for BMW 2 Serie 220 D Xdrive F45

18 products
1 - 18 of 18
Item no.:1197558
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:6109338
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
  • Joint diameter: 76 mm
Item no.:0549566
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 31
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:2167597
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:440728
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 43,75 mm
  • Total length: 188 mm
  • Outer splines: 27
Item no.:452546
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm
Item no.:2167598
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 31
  • Total length: 499 mm
  • Thread size: M16x1.5
Item no.:612652
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 733 mm
Item no.:0108927
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:2174194
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 500 mm
Item no.:2103448
  • Position: Front right
  • Splines gearbox side: 35
  • Splines wheel side: 31
  • Total length: 499 mm
Item no.:141792
  • Position: Front left, Inner
  • Inner splines: 28
  • Seal diameter: 33 mm
  • Outer splines: 28
Item no.:247979
  • Position: Front right, Inner
  • Inner splines: 28
  • Splines gearbox side: 35
  • Seal diameter: 44,5 mm
  • Total length: 126 mm
Item no.:658157
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 61,5 mm
Item no.:610218
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 731 mm
Item no.:0675143
  • Total length: 126 mm
Item no.:0955682
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:695108
  • Position: Rear

Drivetrain for BMW 2 Serie 220 D Xdrive F45

The BMW 2 Serie 220 D Xdrive F45 combines exceptional practicality with BMW's hallmark driving pleasure, enhanced by the stability of the xDrive system. The drivetrain in this model is engineered to handle the substantial torque produced by its efficient diesel engine, distributing power seamlessly between the front and rear axles. Maintaining the components of your BMW 2 Serie is vital to prevent costly repairs and ensure that your four-wheel-drive system operates reliably in all weather conditions. At CVJoint24, we understand the exact technical demands of the 220 D Xdrive variant and supply parts that meet or exceed original equipment specifications.

Choosing the correct spare parts extends your vehicle's service life and preserves the refined driving dynamics BMW is renowned for. The xDrive all-wheel-drive system places heightened demands on every drivetrain component, as even minor imbalances can compromise proper torque distribution. We focus on providing parts engineered specifically to cope with the stresses encountered in a high-torque, four-wheel-drive premium vehicle.

How the BMW 2 Serie 220 D Xdrive F45 drivetrain is designed

The F45 platform, known as the Active Tourer, introduced a transverse engine layout to the BMW range. In the 220 D Xdrive configuration, this involves a sophisticated setup where torque is routed primarily to the front wheels, with the xDrive system engaging the rear axle instantaneously when extra traction is needed. The drivetrain comprises several critical components, including front and rear drive shafts, a transfer box (bevel gear), and a propeller shaft delivering drive to the rear. The front drive shafts endure particularly heavy loads, as they must transfer engine torque while accommodating steering angles and suspension travel simultaneously.

Each outer CV joint on the BMW 2 Serie 220 D Xdrive F45 plays an essential part in transferring rotational power without power loss during articulation. The system demands precision across every connection to ensure the four-wheel drive operates seamlessly, requiring high-grade materials and tight manufacturing tolerances in every replacement part we supply. Because the F45 uses a front-wheel-drive architecture as its baseline, the front drivetrain components experience greater wear than in traditional rear-wheel-drive BMW models, making top-tier replacement parts vital for long-term reliability.

Common faults and symptoms

Several distinct symptoms indicate that the drivetrain on your BMW 2 Serie 220 D Xdrive F45 is beginning to wear. One of the most typical signs is a rhythmic clicking or knocking noise on full steering lock at lower speeds, which usually points to a worn outer CV joint. If you experience vibrations through the steering wheel or seat base under acceleration, this often indicates play or wear in an inner constant velocity joint or an imbalanced drive shaft. It is also important to inspect the CV boots regularly; a split CV joint boot allows road dirt to enter and grease to escape, quickly ruining the joint.

For xDrive models, addressing these issues promptly is especially critical. Any play or imbalance in one driveline section can transfer through the transmission and risk damaging the transfer box or differential. If you notice jerking under hard acceleration or an uneven feel from the four-wheel-drive system, inspect the drive shafts immediately. Ignoring minor warning signs can lead to far more extensive and costly repairs down the line, especially on a technologically advanced platform like the BMW F45.

Common replacement parts for BMW 2 Serie 220 D Xdrive F45

For this specific model, certain high-stress components see regular demand. Our inventory includes parts that are crucial for maintaining the car’s original handling and roadholding. Replacing an entire driveshaft assembly is often more time-efficient and cost-effective than rebuilding individual joints, particularly if the shaft has covered high mileage or shows signs of surface corrosion. We ensure that our parts for BMW meet exacting standards to cope with the torsional stresses of the xDrive system.

Here are the most relevant categories for your vehicle:

  • Drive shafts for BMW 2 Serie 220 D Xdrive F45 – We currently offer three distinct variants tailored to different fitting positions on the vehicle.
  • Outer CV joints for BMW 2 Serie 220 D Xdrive F45 – A vital component for steering articulation and smooth power delivery.

Due to their moving design and continuous exposure to road grit, water and road salt, these are the most frequently replaced parts in the drivetrain. Fitting high-grade components ensures that your BMW retains its everyday reliability.

How to find the right part for your BMW 2 Serie 220 D Xdrive F45

Navigate directly to the appropriate section for the BMW 2 Serie 220 D Xdrive F45:

When diagnosing drivetrain faults, starting in the precise subcategory makes all the difference. By comparing the dedicated product groups for the BMW 2 Serie 220 D Xdrive F45, you can easily distinguish between issues affecting a drive shaft, CV joint or prop shaft and continue to the section that best matches your symptoms and fitment requirements.

Sourcing parts for modern vehicles like the BMW 2 Serie can be complex, as small variations in production month or factory options can alter component dimensions. To make the process simple and reliable, select your car's exact make, model and engine variant in our catalogue. This filters the selection down to parts engineered specifically for your 220 D Xdrive F45. On xDrive models, it is especially important to verify overall shaft length and spline counts, as these differ from the two-wheel-drive versions.

When ordering, be sure to confirm the exact fitting position required on the vehicle. Note that left-hand and right-hand designations refer to the sides of the car as viewed from the driver's seat facing forward. If you are uncertain about fitment details or need help checking technical specifications, our expert customer service team is always on hand to help. Our goal is to ensure you receive the right part first time, avoiding workshop downtime or unnecessary returns.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist with its central warehouse in Helsingborg, Sweden. By focusing exclusively on driveline components, we provide an in-depth level of technical knowledge that general motor factors rarely match. When you order parts for your BMW 2 Serie 220 D Xdrive F45 from us, you benefit from our precise fitment accuracy and dedicated product sourcing. We understand the importance of getting your car back on the road without delay, dispatching quickly to customers across the European Union.

Combining outstanding quality, competitive pricing and a knowledgeable support team that truly understands drivelines, we are the trusted choice for DIY mechanics and professional garages alike. We source exclusively from reputable manufacturers who meet our exacting standards. With CVJoint24, you receive reliable spare parts delivered with precision, making us your dependable partner for all vehicle drivetrain needs.

Frequently Asked Questions about Drivetrain for BMW 2 Serie 220 D Xdrive F45

How do I know if my BMW 220d xDrive needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises from the undercarriage. If you notice shuddering that increases with speed, it is often a worn inner joint or the shaft itself.

Do drive shafts from a front-wheel-drive 2 Series fit an xDrive model?

No, xDrive models often feature specific drive shafts with different dimensions and splines to match the all-wheel-drive transfer box and hubs. Always select your vehicle make, model and engine to find the correct part.

What is included when I buy an outer CV joint for my BMW F45?

Our CV joint kits come complete with the joint itself, a model-specific CV boot, premium grease, circlips and the necessary clamps for a full installation.

Can I replace just the CV boot if the joint still feels fine?

Yes, if you catch a split or damaged CV boot early before dirt and grit have entered, you can save money by simply replacing the boot and repacking it with fresh grease.

Why is exact fitment so critical on xDrive components?

The xDrive system is highly sensitive. Incorrect dimensions or an unbalanced drive shaft can place undue strain on the transfer case, potentially leading to very costly secondary damage.

How quickly can I get my spare parts delivered?

We offer prompt dispatch across the EU for our stocked BMW 2 Series items, helping you minimise the time your car spends off the road in the garage.