BMW 2 Serie 220 I F45

Spare parts and drivetrain components for BMW 2 Serie 220 I F45. Confirm fitment by selecting your car's make, model and engine before ordering.

Products for BMW 2 Serie 220 I F45

21 products
1 - 21 of 21
Item no.:2191099
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 905 mm
  • Joint diameter: 92 mm
Item no.:0584978
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 31
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:0590769
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:1107529
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 535 mm
  • Joint diameter: 92 mm
Item no.:2131929
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 31
  • Total length: 931 mm
Item no.:116364
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 541 mm
Item no.:7301592
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 903 mm
Item no.:116793
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 546 mm
Item no.:3571863
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 70 mm
Item no.:2138383
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 936 mm
Item no.:1151620
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 547 mm
Item no.:3582573
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16×1,5
Item no.:0198690
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 545 mm
Item no.:1122215
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 31
  • Total length: 546 mm
Item no.:2188742
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 904 mm
Item no.:147618
  • Position: Front left, Inner
  • Inner splines: 28
  • Seal diameter: 33 mm
  • Outer splines: 28
Item no.:242170
  • Position: Front right, Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Seal diameter: 33 mm
  • Total length: 531,5 mm
Item no.:3548121
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5
Item no.:0668144
  • Total length: 126 mm
Item no.:0928385
  • Diameter: 39 mm

Drivetrain for BMW 2 Serie 220 I F45

Maintaining the drivetrain on a BMW 2 Serie 220 I F45 demands precision and the correct components. As part of the BMW 2 Serie family, the F45 model is engineered to specific torque and durability requirements. The drivetrain is the core of your car's power delivery, transferring output from the gearbox out to the road wheels. For a 220 I F45, it is vital that every part, from drive shafts to constant velocity joints, works in complete harmony to preserve the driving dynamics the marque is renowned for. We supply parts that meet or exceed original equipment specifications, ensuring long service life and dependable operation.

When sourcing replacement components for your drivetrain, it is essential to choose a specialist who understands the engineering nuances of BMW vehicles. We specialise strictly in these driveline parts to provide an inventory depth few general retailers can match. By prioritising build quality and precise fitment, we reduce the risk of premature failure and costly repeat workshop visits. Every part in our warehouse is thoroughly selected to match the exact specifications of the BMW 2 Serie 220 I F45, giving you complete confidence with every order.

How the drivetrain is configured on the BMW 2 Serie 220 I F45

The BMW 2 Serie 220 I F45 features a modern drivetrain layout engineered for both efficiency and responsiveness. Unlike many classic rear-wheel-drive models from the manufacturer, the F45 uses a front-wheel-drive platform, placing distinct demands on drive shaft construction and articulation angles. The assembly features a gearbox that directs power through the differential to the two front drive shafts. Each drive shaft uses two joints: an inner joint allowing smooth plunging movement, and an outer joint that permits steering angles whilst maintaining constant power delivery to the wheel hub.

The engineering inside a 220 I F45 is compact yet robust. The drive shafts must withstand substantial torque under hard acceleration and cornering loads, particularly given the responsive nature of the petrol engine. High-grade alloys in the joints and durable rubber compounds in the CV boots are crucial to shield the bearing races from road grit and moisture. As this vehicle is commonly driven on both urban commutes and high-speed motorway journeys, its driveline components must endure varied stresses over many miles without compromising ride refinement or safety.

Common faults and symptoms

There are several typical warning signs that the drivetrain on your BMW 2 Serie 220 I F45 is beginning to wear. One of the most frequent indicators of a failing outer CV joint is a rhythmic clicking or knocking sound on full lock under throttle. This usually occurs when lubricating grease has escaped through a split CV boot, allowing water and debris to penetrate the joint and score the bearing tracks. If the clicking disappears when driving in a straight line but returns during turns, the outer joint inevitably needs replacing.

Vibrations felt through the steering wheel or floorpan under acceleration often point to worn inner CV joints or an unbalanced drive shaft. If you experience shuddering at specific cruising speeds or hear a low rumbling drone from underneath, have the drivetrain inspected without delay. Neglecting these symptoms can lead to secondary damage to the differential seals and wheel bearings. Inspecting your CV joint boots regularly for splits or grease misting will help you catch wear early and prevent expensive repairs down the line.

Common parts to replace on the BMW 2 Serie 220 I F45

On the BMW 2 Serie 220 I F45, wear is most commonly seen on the complete drive shafts and the outer CV joints. In our catalogue you will find specific configurations of drive shafts for the BMW 2 Serie 220 I F45, tailored to your exact side and specification. Fitting a complete driveshaft is often the most efficient workshop repair, as you receive a balanced assembly with both inner and outer joints pre-installed. This renews the entire axle assembly at once and removes the risk of an aged inner joint failing shortly after replacing only the outer end.

In addition to complete shafts, we stock 2 different types of outer CV joints. An outer CV joint for the BMW 2 Serie 220 I F45 is an economical choice when the drive shaft bar itself is undamaged and only the outer joint exhibits play. Each replacement joint kit includes a durable new CV boot, retaining clips and high-pressure molybdenum grease required for installation. Selecting the correct replacement for your car's exact build date is crucial, as splines, tooth counts and overall dimensions can vary between production runs.

How to find the right part for your BMW 2 Serie 220 I F45

Navigate directly to the relevant subcategory for your BMW 2 Serie 220 I F45:

When diagnosing driveline issues, narrowing down your search immediately saves valuable time. By comparing the specific product categories for the BMW 2 Serie 220 I F45, you can distinguish between drive shaft, CV joint or propeller shaft issues and head straight to the parts matching your symptoms and vehicle fitment.

If you are unsure which component has developed play, carry out a thorough visual inspection under the vehicle. Check the CV boots for splits, loose retaining bands or escaping grease. Combining a physical check with our vehicle filter guarantees you order the correct part the first time.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying vehicle owners and workshops across the European Union from our central warehouse in Helsingborg, Sweden. We have built our reputation on deep technical expertise and dedicated customer care, helping motorists find exact-fit components for their vehicles, including BMW. When you order from us, you receive high-grade replacement parts backed by our fitment guarantee, so you can carry out repairs without complications.

Our dedicated focus on driveline assemblies allows us to provide product knowledge and stock availability that general motor factors struggle to match. With efficient international dispatch across Europe, we make sure your BMW 2 Serie 220 I F45 is back on the road promptly. We hold our own inventory to ensure stringent quality control and accurate order processing. Choosing CVJoint24 means relying on specialist know-how, dependable dispatch and guaranteed fitment for your vehicle.

Frequently asked questions about BMW 2 Series 220 i F45

Which drivetrain parts are most commonly replaced on a BMW 2 Series 220 i F45?

The most common parts that need replacing are outer CV joints and complete drive shafts, often caused by split CV boots that lead to premature wear.

How does a failing drive shaft affect driving?

A damaged or worn drive shaft can cause severe vibrations, knocking noises when turning, and, in the worst case, a complete loss of drive.

How do I find the correct part for my BMW?

Simply select your BMW model, year and engine variant in our vehicle selector to find parts with a guaranteed fit for your specific car.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits at the wheel and accommodates steering angles, whereas the inner joint sits by the gearbox and absorbs suspension movement.

Are the CV boot and grease included when I buy an outer CV joint?

Yes, our CV joint kits come complete with a CV boot, grease and all necessary hardware for a straightforward replacement.

How fast are parts dispatched for my BMW?

We dispatch stocked items quickly across the European Union from our central warehouse, helping you get your repair started without delay.