BMW 3 Convertible

Owning a BMW 3 Convertible is all about driving pleasure and mechanical precision. To preserve that unique driving experience, your drivetrain must be kept in peak condition. At...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 3 Convertible

75 products
1 - 24 of 75
Item no.:419088
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:412258
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 613 mm
  • Joint diameter: 83 mm
  • Joint diameter, gearbox side: 93 mm
Item no.:517732
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:519199
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 672 mm
  • Joint diameter: 83 mm
  • Joint diameter, gearbox side: 93 mm
Item no.:613238
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:410869
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:518337
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0803673
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:629344
  • Total length: 1,477 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
Item no.:6587166
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0413533
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:615404
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:640228
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 30
  • Seal diameter: 58,7 mm
  • Total length: 131 mm
Item no.:647291
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:648199
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:654051
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0970710
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:696573
  • Position: Rear
Item no.:699943
  • Position: Rear
Item no.:0626840
  • Position: Front
Item no.:0628379
  • Position: Rear
Item no.:644926
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 86 mm
  • Joint diameter: 99 mm
Showing 1–24 of 75 products

Drivetrain for BMW 3 Convertible

The drivetrain in a BMW 3 Convertible is at the very heart of the car's dynamic performance. It is this system that transforms engine output into motion on the road, and for a car engineered to be savoured with the roof down, every single detail of the power transfer is crucial. A properly functioning drivetrain ensures not only acceleration and speed, but also the smoothness and refinement expected of a modern classic. As a Swedish driveline specialist, we understand the specific technical requirements of this model. Whether you drive an older generation or a more recent version of the BMW 3 Convertible, the integrity of these components is vital for the safety and service life of your vehicle. We supply parts that meet or exceed original specifications to ensure your driving experience remains intact.

How the drivetrain is engineered on the BMW 3 Convertible

The layout of the drivetrain on a BMW 3 Convertible follows the marque's traditional longitudinal engine design with primary rear-wheel drive, although certain versions feature all-wheel drive. Power is sent from the gearbox via a propeller shaft to the rear differential. From the differential, output is distributed to the road wheels through two drive shafts. This configuration demands components that can withstand substantial torque loads whilst keeping vibrations to a minimum. The prop shaft is typically equipped with a centre bearing and flexible coupling discs to dampen rotational harmonics, whilst the drive shafts utilise inner and outer CV joints to accommodate suspension travel and steering angles. Understanding this arrangement is key when diagnosing faults, as every link in the chain plays a distinct role in the overall balance and power delivery of your BMW.

Common faults and symptoms

Several symptoms indicate that the drivetrain in your BMW 3 Convertible requires attention. One of the most typical signs is vibration felt through the bodywork or seat during acceleration, which can frequently be traced back to imbalance or wear in a propeller shaft or its centre bearing. If you hear a rhythmic knocking or clicking noise when cornering tightly at low speeds, this is a classic telltale sign of a worn outer CV joint on a drive shaft. Furthermore, vibrations occurring at specific road speeds can point to worn inner constant velocity joints or driveline imbalance. It is also important to check for oil leaks around the differential or gearbox, and to inspect the drive shaft boots regularly. A split CV boot quickly allows grit and road grime to enter and ruin the joint, leading to costly repairs if not resolved promptly.

Common parts to replace on the BMW 3 Convertible

Within the All car makes drivetrain category, certain components are subjected to more severe wear than others. For the BMW 3 Convertible, we see strong demand for drive shafts and propeller shafts. Our catalogue includes multiple variants of drive shafts and prop shafts tailored to the different engine variants and model years of this specific convertible. In addition to these core assemblies, CV joint kits, CV boots and ABS rings are frequently required replacement parts. Because convertible models are often enjoyed for spirited driving, these components endure notable stress. Replacing a worn driveshaft with a brand-new, precision-fit unit not only restores factory handling and performance, but also eliminates irritating noises and vibrations that spoil the open-top driving experience. We stock car parts technically verified to fit your car seamlessly.

How to find the right part for your BMW 3 Convertible

Navigate directly to the appropriate section for your BMW 3 Convertible:

When diagnosing complex drivetrain issues, it pays to start in the correct category straight away. By exploring the dedicated product sections for the BMW 3 Convertible, it becomes straightforward to pinpoint whether you need a drive shaft, CV joint or propeller shaft, taking you straight to the parts that match your symptoms and vehicle specifications.

Our database is continually kept up to date so you can select the correct spare parts first time, fitting without any need for modification.

Why shop with CVJoint24

CVJoint24 is your dedicated specialist for drivetrain and driveline components. As a Swedish specialist with extensive technical expertise, we offer a dedicated range that few competitors can match for quality and depth. We understand how important it is to get your vehicle back on the road, dispatching orders swiftly across the EU directly from our warehouse in Helsingborg, Sweden. Our fitment guarantee means you can purchase with absolute confidence, knowing the part will fit your BMW 3 Convertible when selected by make, model and engine variant. With a strong commitment to customer satisfaction and knowledgeable technical support, we provide genuine expertise for your garage projects at competitive prices.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Convertible

How do I know if my BMW 3 Convertible needs a new drive shaft?

The most common signs are clicking noises on full lock or vibrations during acceleration. If the CV boot is split and grease has leaked out, there is a strong chance the shaft needs to be replaced.

Do all propeller shafts fit every BMW 3 Convertible model?

No, the propeller shaft varies depending on the gearbox type, engine size, and whether the car is rear-wheel drive or four-wheel drive. Always select your make, model and engine to find the correct version.

What is included when I buy a drive shaft from you?

Our drive shafts are supplied as complete assemblies, ready to fit with inner and outer joints and boots pre-assembled, making installation straightforward.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, in many cases we supply individual CV joint kits. However, if the shaft itself is damaged or several joints are worn, it is often more cost-effective to replace the complete drive shaft.

Why does my BMW 3 Convertible vibrate at higher speeds?

This is often caused by an imbalance in the propeller shaft or a worn centre bearing. It can also stem from worn inner CV joints on the drive shafts.

Do you offer a fitment guarantee on drivetrain parts?

Yes, we offer an accurate fitment guarantee. When you select your specific make, model and engine variant, we guarantee that the displayed parts will fit your BMW 3 Convertible.