BMW 3 Serie 316 D E90

Spare parts and drivetrain components for BMW 3 Serie 316 D E90. Check fitment using your make, model and engine before ordering.

Products for BMW 3 Serie 316 D E90

21 products
1 - 21 of 21
Item no.:0344244
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:0245341
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0372561
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:6135979
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:5171932
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:416164
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 614 mm
  • ABS teeth: 48
Item no.:648499
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:648869
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 27
  • Seal diameter: 69 mm
  • Total length: 126 mm
Item no.:412142
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:510741
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:658426
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0940058
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:697872
  • Position: Rear
Item no.:695435
  • Position: Rear
Item no.:0614285
  • Position: Front
Item no.:0624369
  • Position: Rear
Item no.:649880
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:512633
  • Splines wheel side: 27
  • Total length: 667 mm
  • Joint diameter, gearbox side: 100 mm
  • Thread size: M24x1.5
Item no.:419079
  • Splines wheel side: 27
  • Total length: 611 mm
  • Joint diameter, gearbox side: 100 mm
  • Seal ring diameter: 69 mm

Drivetrain for BMW 3 Serie 316 D E90

The BMW 3 Serie 316 D E90 represents a vital chapter in BMW's heritage of compact premium cars, balancing fuel efficiency with engaging driving dynamics. The drivetrain in this specific model is engineered to handle the distinct torque output of the four-cylinder diesel engine effectively, placing exacting demands on every single driveline component. As an owner of a 316 D E90, you know that precision is central to the unique driving experience BMW delivers. Here at CVJoint24, you will find a dedicated range tailored specifically to this vehicle configuration and its technical requirements.

We understand the technical nuances of the E90 chassis and provide components that match or exceed original specifications to ensure durability and optimal operation. Maintaining your drivetrain with the correct parts prevents costly secondary damage to the gearbox and differential, whilst ensuring power transmission remains smooth and responsive for many kilometres to come. Our catalogue is carefully selected to meet the high standards demanded by a modern BMW drivetrain.

How the BMW 3 Serie 316 D E90 drivetrain is engineered

The layout of the drivetrain on a BMW 3 Serie 316 D E90 follows the classic Bavarian rear-wheel-drive principle, giving the car its characteristic balance and steering precision. Power generated by the engine is transferred through the gearbox to a central propeller shaft for BMW 3 Serie 316 D E90. Running underneath the floorpan, this prop shaft is strategically supported by a centre bearing and rubber mountings to suppress vibrations and absorb load forces. At the rear axle, it connects to the differential, which distributes drive out to the rear wheels through two robust drive shafts.

Each drive shaft features inner and outer CV joints that allow full suspension travel and varying angles without interrupting power delivery. For the system to function at its best, every component—from the smallest circlip to the heavy-duty shafts—must remain in excellent condition and correctly balanced. The E90 platform is renowned for its torsional rigidity, which also means tolerances are tight; choosing the right spare parts is vital to preserving your car's original handling and road safety.

Common faults and symptoms

There are several clear indicators that drivetrain components on your BMW 3 Serie 316 D E90 are wearing out or have suffered damage. One of the most common symptoms is vibration felt through the bodyshell or seat under acceleration, which often points to an unbalanced propeller shaft or a worn centre bearing. If you hear a rhythmic clicking noise while cornering, particularly at low speeds, this is a classic sign of play in an outer constant velocity joint caused by wear or split CV boots.

ABS issues are also relatively frequent for BMW owners, where a corroded or cracked ABS ring for BMW 3 Serie 316 D E90 sends erratic signals to the electronic control unit. This typically triggers the ABS warning light or causes unwanted pulsing through the brake pedal during gentle stops. Ignoring these warnings can allow faults to escalate, accelerating wear on more expensive items such as the differential or wheel bearings. Diagnosing issues early and replacing the affected part saves substantial time and expense in the long run.

Common replacement parts for BMW 3 Serie 316 D E90

When maintaining a BMW 3 Serie 316 D E90, certain parts require replacement more frequently due to standard wear and exposure to harsh European winters. Our range for this model includes three variants of drive shafts, engineered to handle the torque delivery of the diesel engine and the specific chassis setup. We also supply three propeller shaft assemblies, crucial for eliminating driveline vibrations and preserving cabin refinement.

Another high-demand replacement part is the ABS reluctor ring; we stock two dedicated options that solve rear-axle sensor faults without the expense of replacing the complete driveshaft. Browse the right subcategory to find the exact component you need:

  • Drive shafts for BMW 3 Serie 316 D E90 – Complete shafts for dependable, efficient power transfer.
  • Propeller shafts for BMW 3 Serie 316 D E90 – For smooth, vibration-free running and high-speed stability.
  • ABS rings for BMW 3 Serie 316 D E90 – Corrosion-resistant reluctor rings for accurate sensor signals and safety.

These components are chosen to deliver performance equal to or exceeding original equipment, ensuring your BMW retains its sophisticated driving feel and high build standards.

Finding the right parts for your BMW 3 Serie 316 D E90

Navigate directly to the appropriate category for your BMW 3 Serie 316 D E90:

With various interconnected drivetrain components, it pays to start in the correct section straight away. By identifying the exact assembly for your BMW 3 Serie 316 D E90, you can readily differentiate between drive shaft, CV joint, or prop shaft issues and head straight to the parts matching your symptoms and specifications.

We want you to feel fully confident that the component you order fits your vehicle upon arrival. Combining thorough technical data with our specialised expertise, we minimise fitting issues whether your car is being repaired by a garage or a DIY mechanic at home.

Why buy from CVJoint24?

CVJoint24 is not simply another general online retailer; we are the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. When you source parts for your BMW 3 Serie 316 D E90 from us, you benefit from in-depth knowledge that general suppliers rarely match. We offer a dedicated fitment guarantee: simply select your car's make, model, and engine, and we take complete responsibility for ensuring your parts fit correctly. Getting the right part first time eliminates frustration and unnecessary returns.

We recognise how essential it is to get your vehicle back on the road without delay. That is why we provide rapid dispatch and competitive pricing across our comprehensive catalogue, backed by true technical expertise. High-quality manufacturing, reliable customer service, and knowledgeable support come together to give you the finest driveline shopping experience in the industry.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Series 316 D E90

What are the most common signs of a failing drive shaft on a BMW E90?

The most common symptoms include clicking noises during sharp turns, vibrations under acceleration and sometimes a clunking noise during speed changes. If the boot is split and grease has leaked out, there is a high risk that the CV joint is damaged.

Does the same propeller shaft fit all BMW 3 Series models?

No, the propeller shaft is specific to the engine variant, gearbox type (manual/automatic) and wheelbase. For a BMW 316 D E90, it is vital to select your exact model and engine specifications to ensure you receive a shaft with the correct length and mounting points.

Why is the ABS warning light on in my BMW 316 D?

On the E90 model, a cracked or corroded ABS ring on the rear axle is a very common cause. The ring swells due to rust and rubs against the sensor, generating faulty signals and triggering the warning light.

Can I replace just the ABS ring, or do I need to replace the entire drive shaft?

On the BMW 3 Series 316 D E90, you can readily replace just the ABS ring if the drive shaft itself is otherwise in good condition. This is a significantly more cost-effective repair than replacing the complete shaft.

How do I know whether vibrations are coming from the propeller shaft or the wheels?

Vibrations from the propeller shaft are often speed-dependent and felt more through the bodywork and seat than through the steering wheel. Wheel imbalance is usually felt most clearly in the steering wheel at specific speeds, typically between 80-110 km/h.

Do you offer a guaranteed fit on parts for BMW 3 Series 316 D E90?

Yes, we provide an accurate fitment guarantee when you select parts by your vehicle's exact make, model and engine variant. This ensures that the part will fit your specific BMW model, giving you complete peace of mind with your purchase.