BMW 3 Serie 316 I E36

Spare parts and drivetrain components for BMW 3 Serie 316 I E36. Select your make, model and engine to ensure a correct fit before ordering.

Products for BMW 3 Serie 316 I E36

18 products
1 - 18 of 18
Item no.:0246974
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:6179112
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 592 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:6138589
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 625 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0436085
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 94 mm
Item no.:0994781
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:690544
  • Position: Rear
Item no.:7302092
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 625 mm
  • Joint diameter: 86 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:519758
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 675 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:647212
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 64 mm
  • Total length: 126,5 mm
  • ABS teeth: 48
Item no.:416117
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 625 mm
  • ABS teeth: 48
Item no.:645028
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
Item no.:612369
  • Position: Rear
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 585 mm
  • ABS teeth: 48
Item no.:6583493
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:614518
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 618 mm
  • Joint diameter, gearbox side: 94 mm
  • ABS teeth: 48
Item no.:619597
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 607 mm
  • ABS teeth: 48
Item no.:692054
  • Position: Rear
Item no.:691366
  • Position: Rear

Drivetrain for BMW 3 Serie 316 I E36

The BMW 3 Serie 316 I E36 is an iconic model that requires specific components to maintain its renowned driving dynamics. The drivetrain in this car is engineered to deliver power from the four-cylinder engine to the rear wheels with minimal loss and maximum precision. As a specialist in drivetrain components, we offer a carefully selected range tailored to the unique demands of the E36 platform. Whether you are restoring a classic or carrying out essential maintenance on your daily driver, the right parts are vital for your car’s longevity.

We have gathered the most relevant parts for your BMW 3 Serie 316 I E36 to make your choice as straightforward as possible. By focusing on quality and an exact fit, we minimise the risk of future problems and unnecessary wear on adjacent components. Our expertise in this field allows us to offer solutions that match original specifications, which is particularly important for a model where balanced power transmission is central to the driving experience.

How the drivetrain is built on the BMW 3 Serie 316 I E36

The layout of the drivetrain on a BMW 3 Serie 316 I E36 follows the classic configuration with a longitudinally mounted engine and rear-wheel drive. Power travels from the engine through the gearbox and onward into a propeller shaft for the BMW 3 Serie 316 I E36. The prop shaft is a central component running beneath the car, transferring torque to the differential on the rear axle. The role of the differential is then to distribute power to the two rear drive shafts, which in turn drive the wheels.

This setup requires every part to work in complete harmony. Every link in the chain, from the flexible coupling at the gearbox to the CV joints at the wheel hubs, must be in top condition to prevent vibrations and unwanted noises. The E36 chassis is renowned for its communicative steering and roadholding, but this relies on a power transmission system free from play and imbalance. Understanding this arrangement is key to pinpointing where a fault might have developed.

Common faults and symptoms

When the drivetrain on a BMW 3 Serie 316 I E36 starts to wear, clear symptoms often emerge that every driver should watch for. One of the most typical signs of a worn drive shaft is a clicking or knocking noise heard during sharp cornering or when accelerating from a standstill. If vibrations appear during acceleration, especially at higher speeds, this can point instead to an imbalanced propeller shaft or a failing centre bearing. It is important not to ignore these signs, as a fault in one section of the drivetrain can quickly cause consequential damage to neighbouring components.

Another common symptom is oil leakage around the differential or at the drive shaft mountings, typically caused by worn oil seals. If you notice a whining sound from the rear axle, it may indicate that the differential requires attention. By paying close attention to your car's symptoms and acting early, you can avoid costly repairs and ensure that your BMW remains safe to drive on the road.

Common parts to replace on the BMW 3 Serie 316 I E36

For the BMW 3 Serie 316 I E36, drive shafts and propeller shaft components are the items most frequently in need of replacement after many years of faithful service. We offer a dedicated range for this model covering the most frequent requirements:

  • Drive shaft for BMW 3 Serie 316 I E36 – We stock several variants to cover different technical specifications.
  • Propeller shaft for BMW 3 Serie 316 I E36 – A critical component for eliminating chassis vibrations.

Alongside these main components, it is always wise to inspect the CV boots and mounting hardware during replacement. A split boot quickly lets road dirt penetrate the constant velocity joint, ruining lubrication and triggering premature wear. By choosing the right spare parts from the start, you ensure a durable repair and preserve your car's driving characteristics to BMW's exacting standards.

How to find the right part for the BMW 3 Serie 316 I E36

Browse directly to the relevant subcategory for your BMW 3 Serie 316 I E36:

On a vehicle where several drivetrain faults can occur, starting in the right category saves time. By comparing the exact component sections for the BMW 3 Serie 316 I E36, you can easily distinguish between issues with the drive shaft, CV joint or propeller shaft, and head straight to the page that best matches your symptoms and fitment.

Identifying the exact part for an older BMW 3 Serie can occasionally be challenging due to technical updates introduced during the model's production run. The most reliable way to select the right components for your 316 I E36 is to filter by your car's exact make, model and engine variant. This matches your vehicle's specific details against our database of verified fitments, keeping the risk of incorrect orders to a minimum. You can shop with confidence, knowing the part you order is designed specifically for your vehicle.

If you are unsure about a technical detail, such as the overall length of a driveshaft or the spline count, we always recommend comparing it with the original part removed from your car whenever possible. Our customer support team and technical guides are also on hand to assist you with the range. Shopping with a specialist gives you direct access to deep technical knowledge of BMW drivelines, making your purchase both straightforward and reliable.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching parts directly from our central warehouse in Helsingborg, Sweden across the European Union. We have built specialised expertise in automotive power transmission to supply our customers with dependable products. When you choose us for your BMW 3 Serie 316 I E36, you receive high-quality car parts alongside the reassurance of our dedicated fitment guarantee, helping you get the right part the first time without unnecessary hassle.

Focusing on accurate fitment and a comprehensive catalogue allows us to supply solutions that many general motor factors simply do not stock. We combine technical expertise with swift European dispatch to keep your car’s workshop downtime to an absolute minimum. As dedicated driveline specialists, we deliver quality and dimensional accuracy you can rely on. Welcome to a dependable parts specialist that always delivers the right solution for your car.

Frequently Asked Questions about Drivetrain for BMW 3 Serie 316 I E36

Which drivetrain parts are available for BMW 3 Serie 316 I E36?

We primarily offer drive shafts and propeller shafts specifically adapted for BMW 3 Serie 316 I E36, with a total of 6 matching products in our range.

How do I know that the drive shaft fits my 316i E36?

The most reliable method is to select your vehicle by make, model and engine in our store. We offer a fitment guarantee to ensure you get the exact part for your specific car model.

What are the symptoms of a failing propeller shaft on a BMW E36?

Common symptoms include vibrations felt throughout the vehicle during acceleration, unusual noises from underneath the car, or a distinct clunking sound when letting off the accelerator.

How many drive shafts does my BMW 316i E36 have?

Because the BMW 3 Serie 316 I E36 is rear-wheel drive, it has two drive shafts fitted on the rear axle, one on each side of the differential.

Do you offer fast delivery for BMW parts?

Yes, we offer fast delivery on in-stock items so that you can get your BMW 3 Serie 316 I E36 back on the road as quickly as possible.

Why should I choose CVJoint24 instead of a general car parts retailer?

We are dedicated specialists in drivetrains and power transmission. This means we provide a broader, more tailored range and deeper technical expertise regarding these specific components than general motor factors.