BMW 3 Serie 316 I E90

Spare parts and drivetrain components for the BMW 3 Serie 316 I E90. Select your make, model and engine to confirm exact fitment before ordering.

Products for BMW 3 Serie 316 I E90

22 products
1 - 22 of 22
Item no.:0308510
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:5183788
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0276187
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0298293
  • Total length: 1,610 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 14 mm
Item no.:0215337
  • Total length: 1,477 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
Item no.:0331282
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:4186794
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:644973
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:653990
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:6599367
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0493347
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:645522
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:658628
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:690607
  • Position: Rear
Item no.:697729
  • Position: Rear
Item no.:0697413
  • Position: Rear
Item no.:644526
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:414174
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:517949
  • Splines wheel side: 27
  • Total length: 665 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5

Drivetrain for BMW 3 Serie 316 I E90

The BMW 3 Serie 316 I E90 represents a vital part of the E90 generation, where poise and driving dynamics take centre stage even in this entry-level model. The drivetrain in this car is engineered to transfer power from the four-cylinder engine to the rear wheels with minimal loss and exceptional precision. As the owner of a BMW 3 Serie 316 I E90, you know that every component in the driveline plays a decisive role in the overall driving experience and classic BMW feel. At CVJoint24, we specialise in these precise components so you can preserve your car’s original handling for many years to come.

Choosing the correct spare parts protects not only reliability but also the car's resale value. Our range is tailored to satisfy the rigorous demands placed on premium German cars, offering dependable solutions from the wheel hubs right back to the gearbox. We understand that the 316 I model requires parts tailored to its specific engineering, which is why we have gathered the most relevant components in one place to streamline your repair work.

How the drivetrain is structured on the BMW 3 Serie 316 I E90

The layout of the drivetrain on a BMW 3 Serie 316 I E90 follows the traditional rear-wheel-drive architecture for which BMW is internationally renowned. Power originates in the engine and passes through the gearbox before reaching the propeller shaft. The prop shaft is a pivotal component running beneath the car floor to transfer torque to the rear axle differential. This shaft is typically split into sections, supported by a centre bearing and flexible rubber discs (guibo or propshaft couplings) to damp vibrations and accommodate chassis flex while on the road.

From the rear differential, power is channelled outwards to the rear wheels via two drive shafts. This setup demands that all parts remain in perfect harmony to eliminate imbalance. On a BMW 3 Serie 316 I E90, meticulous prop shaft balance and precision in the driveshaft CV joints are critical to prevent driveline vibrations from echoing through the cabin. Furthermore, ABS rings are seated at the wheel hubs to deliver exact wheel speed signals to the traction control and ABS systems. Understanding this layout is essential for diagnosing drivetrain issues and pinpointing which part needs replacing.

Common faults and symptoms

Several clear signs indicate that drivetrain parts on your BMW 3 Serie 316 I E90 are worn or damaged. One of the most common symptoms is a distinct vibration felt through the floorpan or driver's seat under acceleration. This typically stems from imbalance or wear in a propeller shaft on the BMW 3 Serie 316 I E90 or its centre bearing. If the vibration intensifies as road speed rises, the prop shaft requires urgent attention.

A rhythmic clicking or snapping noise when negotiating tight bends or pulling away from a standstill usually indicates a worn CV joint on the drive shaft. Another common issue specific to E90 models is rust scale building up beneath the rear ABS ring on the BMW 3 Serie 316 I E90, which causes the ring to expand and eventually crack. This typically triggers the ABS warning lamp or leads to unwanted ABS activation during gentle braking. Addressing these symptoms early prevents secondary, costlier damage to the differential or gearbox.

Frequently replaced parts on the BMW 3 Serie 316 I E90

For the BMW 3 Serie 316 I E90, certain driveline parts require replacement more frequently due to standard wear and exposure to moisture and road salt. In our catalogue you will find these critical components:

  • Drive shaft for BMW 3 Serie 316 I E90: Precision-engineered for an exact fit on the rear axle, essential for eliminating driveline play and noises.
  • Propeller shaft for BMW 3 Serie 316 I E90: Multiple configurations available to match the specific transmission and axle setup of this model.
  • ABS ring for BMW 3 Serie 316 I E90: High-grade replacement rings that solve wheel speed sensor faults without replacing the entire shaft.

All these components are manufactured to meet or exceed original equipment standards. A failed driveshaft can leave your car completely immobilised, whilst a failing prop shaft risks severe damage to adjacent transmission parts. Fitting a replacement ABS reluctor ring is also a very cost-effective DIY fix, saving you from expensive garage bills where whole new hub or shaft assemblies might otherwise be quoted.

How to find the right part for your BMW 3 Serie 316 I E90

Navigate directly to the required component section for your BMW 3 Serie 316 I E90:

When troubleshooting a car with various possible drivetrain issues, beginning in the right category saves valuable time. By comparing the exact sections for the BMW 3 Serie 316 I E90, you can distinguish between drive shaft, CV joint and propeller shaft symptoms and head straight to the parts that match your vehicle.

Finding the correct replacement part for a BMW 3 Serie 316 I E90 can occasionally feel tricky because of production changes across model years and transmission variants. The most reliable method to ensure a precise fit is to filter by your car's exact make, model and engine specification. This filters our catalogue to show parts technically verified for your exact vehicle. For the BMW 3 Serie 316 I E90, we maintain extensive stock with particular depth in prop shafts and drive shafts.

When browsing, take a moment to confirm key technical attributes such as overall length and spline tooth counts if multiple options are listed for your build date. Our aim is to help you select the exact part first time, avoiding costly returns and delays. If you are unsure which component matches your E90 build, our driveline specialists are on hand to advise on selecting the right BMW 3 Serie parts. We have organised our product data thoroughly so you can order with absolute confidence.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for vehicle drivetrains and power transmission parts. As the international arm of a Swedish driveline specialist, we understand the demanding conditions European roads and harsh winter seasons place on cars like the BMW 3 Serie 316 I E90. We combine deep technical expertise with efficient logistics, dispatching directly from our warehouse in Helsingborg, Sweden across the EU. When selecting your car via make, model and engine, you can rely on our accurate fitment data.

We focus on delivering high-quality, durable components at competitive prices, never compromising on reliability. Concentrating solely on drivetrain components allows us to provide deeper technical expertise and an extensive stock profile that general motor factors cannot match. Choose CVJoint24 for dependable service, rapid dispatch and robust parts that keep your BMW running smoothly for thousands of kilometres ahead.

Frequently asked questions about drivetrain parts for BMW 3 Series 316 I E90

How do I know if the propeller shaft on my BMW 3 Series 316 I E90 is failing?

The most common signs are body vibrations that increase with speed, or a thumping noise from underneath the car during acceleration. This is often caused by wear in the centre bearing or universal joints.

Why is the ABS warning light on in my BMW E90?

A very common fault on the BMW 3 Series 316 I E90 is that the ABS ring on the drive shaft corrodes and cracks, which disrupts the sensor signal. We supply separate ABS rings to resolve this issue cost-effectively.

Do all BMW 3 Series drive shafts fit every model?

No, drive shafts vary depending on the engine variant, gearbox and model year. Always select your make, model and engine on cvjoint24.com to find the exact drive shaft for your 316 I E90.

What is included in the fitment guarantee at cvjoint24.com?

Our fitment guarantee means that if you choose a part by matching your vehicle details and it unexpectedly does not fit, we will help you find the right component or provide a full refund.

Can I replace just the ABS ring or do I have to replace the complete drive shaft?

On the BMW 3 Series 316 I E90, you can often replace just the ABS ring if the rest of the drive shaft is in good condition. This is a significantly more economical solution that we recommend.

How quickly do you deliver parts for the BMW 3 Series 316 I E90?

We dispatch quickly from our Swedish warehouse across the EU, with fast delivery on most in-stock drivetrain items so you can get your BMW back on the road promptly.