BMW 3 Serie 318 I E36

Spare parts and drivetrain components for BMW 3 Serie 318 I E36. Confirm fitment by selecting your make, model and engine before ordering.

Products for BMW 3 Serie 318 I E36

14 products
1 - 14 of 14
Item no.:6176067
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 625 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0277589
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:7302076
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 625 mm
  • Joint diameter: 86 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:511413
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 675 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0919445
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:692086
  • Position: Rear
Item no.:412034
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 625 mm
  • ABS teeth: 48
Item no.:0469968
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 94 mm
Item no.:648111
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
Item no.:648908
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 64 mm
  • Total length: 126,5 mm
  • ABS teeth: 48
Item no.:697639
  • Position: Rear
Item no.:691444
  • Position: Rear
Item no.:618687
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 618 mm
  • Joint diameter, gearbox side: 94 mm
  • ABS teeth: 48

Drivetrain for BMW 3 Serie 318 I E36

The BMW 3 Serie 318 I E36 represents an era of German engineering where mechanical feel and durability took centre stage. To preserve this driving feel, there can be no compromise on the quality of spare parts. The drivetrain is a complex chain of components that must all work in perfect harmony to transfer engine power to the tarmac without losses. As the owner of a 318i, you know that every horsepower counts, and worn power transmission components can cause both a loss of power and higher fuel consumption. At CVJoint24, we are dedicated to being the leading source for All car makes across Europe. We understand that E36 owners are often enthusiasts who value near-original performance. That is why our range is carefully selected to offer the ideal balance between price and quality, ensuring your BMW remains the engaging machine it was built to be.

How the drivetrain is engineered on the BMW 3 Serie 318 I E36

The technical layout of the drivetrain on a BMW 3 Serie 318 I E36 is both robust and sophisticated. The engine is mounted longitudinally, typical of BMW's rear-wheel-drive architecture. Running from the gearbox is a two-piece propeller shaft for BMW 3 Serie 318 I E36 supported by a centre bearing. This centre bearing is a critical point that often wears over time. The prop shaft transfers torque to the rear axle where a differential is fitted. From the differential, two drive shafts then deliver power to the rear wheels. This configuration gives the car its superb handling, but also means there are multiple moving parts that require inspection. Every link in this chain, from the flex disc at the gearbox to the outer CV joints, plays a vital role in how the car behaves on the road. Understanding this layout is essential for carrying out proper maintenance and repairs on your BMW.

Common faults and symptoms

Identifying drivetrain faults on a BMW 3 Serie 318 I E36 requires a trained ear and a feel for vehicle vibrations. One of the most typical symptoms of a worn driveshaft on a BMW 3 Serie 318 I E36 is a rhythmic clicking sound that is most noticeable under acceleration out of a bend. This is usually caused by grease escaping from the CV joint due to a split CV boot, leading to metal-on-metal contact. Vibrations that appear at specific speeds, often between 80 and 110 km/h, can instead indicate an out-of-balance propeller shaft or a failing centre bearing. It is also important to listen for clunking noises when changing gear or releasing the clutch, which can point to play in the differential or worn universal joints. By acting early when these symptoms arise, you can often avoid more extensive and costly repairs later, saving both time and money whilst preserving your car's value.

Common parts to replace on the BMW 3 Serie 318 I E36

When it comes to replacing parts on a BMW 3 Serie 318 I E36, certain components make up the majority of requirements. Drive shafts are one such item, as they constantly work under high load in an exposed position beneath the car. We often recommend replacing the complete unit to ensure both the inner and outer joints are in factory condition. Another common job is reconditioning or renewing the prop shaft. For the propeller shaft on the BMW 3 Serie 318 I E36, we supply solutions that restore the smooth, vibration-free operation characteristic of a well-maintained BMW. In addition to these, it is wise to inspect hardware such as mounting bolts and seals. Here is an overview of the key categories for your model:

  • Drive shaft for BMW 3 Serie 318 I E36: Complete shafts ready for straightforward fitting and long service life.
  • Propeller shaft for BMW 3 Serie 318 I E36: Precision-balanced shafts that eliminate irritating chassis vibrations.
  • Centre bearings and flex discs: Vital components for damping vibrations and protecting the gearbox.

By choosing the right car parts, you ensure your E36 retains its mechanical integrity for many years to come.

How to find the right part for your BMW 3 Serie 318 I E36

Proceed to the relevant section for your BMW 3 Serie 318 I E36:

On a car with several potential drivetrain issues, it pays to start in the correct category straight away. Comparing the exact component sections for the BMW 3 Serie 318 I E36 makes it easier to tell drive shaft, CV joint or propeller shaft problems apart and navigate directly to the page that best matches your symptoms and fitment.

Navigating the maze of spare parts can seem daunting, but for your BMW 3 Serie 318 I E36 we have made it simple. The key to a successful repair is getting the correct component the first time. By selecting your car's make, model and engine, your vehicle's exact technical data is matched against our warehouse stock. This is particularly important for the BMW 3 Serie, where subtle differences in production month or specification can affect compatibility. Our fitment guarantee gives you complete peace of mind: if we confirm the part matches your selected specification, it will fit. We have invested thousands of hours into verifying our data so that you can order with confidence. If you are ever unsure, our specialist support is just a phone call or email away, ready to assist with your drivetrain requirements.

Why shop with CVJoint24

CVJoint24 is not just an online retailer; we are the international shop of a Swedish driveline specialist with a genuine passion for power transmission. When you buy parts for your BMW 3 Serie 318 I E36 from us, you benefit from deep niche expertise. We stock our components at our central warehouse in Helsingborg, Sweden, ensuring reliable quality control and prompt dispatch across the European Union. Our aim is always to provide the right product at the right price, with no compromise on technical standards. We know BMW owners expect precision, and we strive to exceed those expectations at every stage. From the moment you search for parts for your BMW until the new part is installed on your car, we are here to support you. Choose an expert who understands your drivetrain inside out – choose CVJoint24 for dependable parts built to last.

Frequently Asked Questions about Drivetrain for BMW 3 Serie 318 I E36

Which drivetrain parts are most commonly replaced on a BMW E36 318i?

The most common parts requiring replacement are drive shafts, the propeller shaft centre bearing, and the propshaft doughnut coupling (Giubo). Due to the age of the car, CV boots are also a frequent maintenance item.

How do I know if the propeller shaft is failing on my BMW 318i?

Typical symptoms of a worn propeller shaft include vibrations through the chassis during acceleration or at specific speeds, as well as noises such as clunking or whining from beneath the centre of the car.

Do all E36 drive shafts fit my 318i?

No, drive shafts can vary depending on the engine option and model year. It is therefore essential to filter by your car's exact make, model, and engine variant to ensure the correct fit.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with inner and outer CV joints, CV boots, and premium grease, ready for direct installation on your car.

How quickly can my spare parts be delivered?

We offer next-day dispatch on most of our stocked items, helping you get your BMW 3 Serie 318 I E36 back on the road without delay.

Does the fitment guarantee also apply to older BMW models such as the E36?

Yes, our fitment guarantee covers all models listed in our catalogue. Select your exact vehicle make, model, and engine to ensure you receive the correct part with a guaranteed fit.