BMW 3 Serie 320 D Xdrive E91

Spare parts and drivetrain components for BMW 3 Serie 320 D Xdrive E91. Select your make, model and engine to ensure correct fitment before ordering.

Products for BMW 3 Serie 320 D Xdrive E91

40 products
25 - 40 of 40
Item no.:0997492
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:0650751
  • Total length: 110 mm
Item no.:0936815
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:696776
  • Position: Rear
Item no.:398035
  • Position: Front
Item no.:695104
  • Position: Rear
Item no.:0679182
  • Position: Front
Item no.:0591779
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 30
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:417837
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 764 mm
  • Joint diameter: 87,8 mm
Showing 25–40 of 40 products

Drivetrain for BMW 3 Serie 320 D Xdrive E91

The BMW 3 Serie 320 D Xdrive E91 is renowned for combining driving dynamics with practical versatility, particularly when paired with the intelligent xDrive all-wheel drive system. The drivetrain in this specific model is a sophisticated assembly requiring precision-engineered components to function seamlessly under all conditions. As a dedicated drivetrain specialist, we understand the exact demands placed on a BMW E91 Touring equipped with a diesel engine and all-wheel drive. The power transmission must cope with both the high torque produced by the efficient diesel engine and the dynamic front-to-rear torque split demanded by the xDrive system. We provide an extensive range of parts tailored specifically to this variant, ensuring your vehicle maintains its factory driving dynamics and safety on the road. Every component has been meticulously selected to meet the high standards BMW owners expect for durability and precision.

Owning an all-wheel-drive BMW requires diligent maintenance of the driveline. Because the system is deeply integrated with the vehicle's stability control, even slight imbalance or play in a CV joint can compromise the entire driving experience. Choosing high-quality spare parts from the outset prolongs the service life of your BMW 3 Serie 320 D Xdrive E91 and helps prevent costly secondary damage to major units such as the transfer box or differentials. Our focus is on delivering parts that do not just fit physically, but also match the exacting technical tolerances dictated by the complex logic of the xDrive system.

How the drivetrain is configured on the BMW 3 Serie 320 D Xdrive E91

The drivetrain architecture on a BMW 3 Serie 320 D Xdrive E91 differs significantly from its rear-wheel-drive stablemates. The configuration relies on a gearbox that routes torque via a transfer box to both the front and rear axles. This layout requires a main central propeller shaft on the BMW 3 Serie 320 D Xdrive E91 running to the rear differential, alongside a secondary prop shaft driving the front axle. From the differentials, torque is distributed to the road wheels through four separate drive shafts. Because the xDrive system continuously varies the torque split in response to road conditions and driving style, every component is subjected to fluctuating and demanding loads. High precision and premium metallurgy are therefore vital.

A healthy drivetrain is the core of your vehicle's propulsion, and every link in the chain—from joints to shafts—plays a crucial part in overall refinement. On the E91, the front drive shafts are particularly compact to clear the tighter packaging around the front suspension, placing elevated demands on the angular tolerance of the constant velocity joints. The rear axle, meanwhile, handles the majority of the torque under normal cruising, making the prop shaft centre bearing and rubber flex discs critical inspection points. By understanding these mechanical intricacies, we supply components engineered specifically for the stresses generated by an all-wheel-drive BMW 320d.

Common faults and symptoms

Catching drivetrain faults early can prevent extensive damage and costly repairs. On the BMW 3 Serie 320 D Xdrive E91, noticeable vibrations during acceleration are a classic indicator that an inner CV joint or the propeller shaft centre bearing is starting to deteriorate. If you detect a rhythmic clicking or knocking sound on full steering lock at lower speeds, an outer CV joint on a BMW 3 Serie 320 D Xdrive E91 drive shaft is usually worn or has lost its lubricating grease through a split CV boot. These warning signs should never be overlooked, as an outright driveshaft failure can leave you stranded and potentially damage surrounding suspension components.

Another common issue on this platform is the appearance of warning messages relating to the ABS, traction control, or DSC system, which can frequently be traced to a corroded or cracked ABS ring on the BMW 3 Serie 320 D Xdrive E91. When the ring expands due to rust developing on the drive shaft beneath it, it produces erratic signals at the wheel speed sensor. This can trigger unexpected ABS intervention under light braking or cause the safety systems to disengage entirely, illuminating dashboard warning lights. Addressing these symptoms promptly ensures your car retains its active safety systems and prevents the need for far more expensive repairs to the ABS module.

Common replacement parts for the BMW 3 Serie 320 D Xdrive E91

Based on our extensive catalogue data and workshop experience, specific components require replacement more regularly on this BMW variant. Front drive shafts are heavily stressed on xDrive models due to the combined operating angles of steering articulation and power delivery. We stock several drive shaft variants to cater for the specific setup of your E91. The propeller shaft is another vital link in the driveline, and we supply dedicated options engineered to eliminate cabin vibrations and restore smooth running. Finally, reluctor rings are a frequent replacement item; we supply 2 types to resolve ABS sensor faults permanently.

Focusing on these key driveline areas will keep your car driving just as the manufacturer intended. Here are the primary component categories to monitor on your vehicle:

  • Drive shaft - Complete front and rear shafts engineered to handle xDrive torque outputs reliably.
  • Propeller shaft - Balanced longitudinal shafts that eliminate cabin vibrations and harshness at cruising speeds.
  • ABS ring - Precision reluctor rings that ensure your vehicle stability systems receive accurate wheel-speed data.

Our comprehensive parts catalogue for this model ensures you can quickly source the exact replacement needed, whether tackling routine repairs or an extensive driveline overhaul.

How to find the correct part for your BMW 3 Serie 320 D Xdrive E91

Navigate directly to the appropriate category for the BMW 3 Serie 320 D Xdrive E91:

When diagnosing driveline issues, navigating directly to the dedicated section makes identifying the right part much simpler. Comparing the exact categories for the BMW 3 Serie 320 D Xdrive E91 helps you distinguish between drive shaft, CV joint, or prop shaft faults and proceed straight to the products that match your vehicle's symptoms and fitment.

Locating the exact driveline component for an xDrive BMW can be complex, as specifications often vary significantly from rear-wheel-drive models across the BMW 3 Serie. The easiest and most dependable way to verify compatibility is to select your car's exact make, model, and engine variant in our store. This filters our catalogue down to components that are fully compatible with your BMW 3 Serie 320 D Xdrive E91. This step is particularly vital for drive shafts and prop shafts, where overall lengths, spline counts, and flange mountings differ depending on the engine and driveline specification.

It is also sensible to confirm technical parameters such as tooth counts on ABS rings, as slight revisions occurred across production runs. Our parts system is designed to provide maximum accuracy, helping you avoid incorrect orders and unnecessary workshop delays. Should you need any assistance confirming fitment, our technical team is on hand to assist. We have extensive technical knowledge of the E91 chassis and can guide you using OEM reference numbers and detailed component specifications.

Why choose CVJoint24?

CVJoint24 is not just another generic car parts retailer; we are the international shop of a Swedish driveline specialist shipping across the EU, with a dedicated warehouse in Helsingborg, Sweden. When sourcing parts for your BMW 3 Serie 320 D Xdrive E91 through us, you benefit from focused expertise that general parts suppliers rarely possess. We back our products with a fitment guarantee, giving you complete peace of mind that the parts you order will fit your car accurately when chosen using our vehicle selector. This saves you both time and hassle on the ramp.

With prompt dispatch across the European Union, we keep workshop downtime to an absolute minimum. Our goal is to ensure you find the correct component first time, combining OE-matching quality with competitive pricing. We build our reputation on solid technical competence and a range capable of covering even the most niche requirements of your BMW's drivetrain. When shopping with us, you can trust that every component meets rigorous engineering standards—parts we would gladly install in our own cars. Welcome to your online driveline specialist.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Serie 320 D Xdrive E91

What are the most common signs of a failing drive shaft on my BMW 320d xDrive?

The most common symptoms are clicking noises when making sharp turns (outer CV joint) or vibrations through the car under acceleration (inner CV joint). On xDrive models, the front drive shafts are under particular strain.

Why is the ABS warning light on in my BMW E91?

This is frequently caused by a cracked or corroded ABS ring on the rear axle. Rust causes the ring to expand, damaging the sensor or creating faulty signals that trigger the warning light.

Do drive shafts from a rear-wheel-drive 3 Series fit my xDrive model?

No, xDrive models require specific drive shafts with different lengths and mountings to accommodate the front-wheel drive and transfer box.

How do I know which propeller shaft fits my BMW 320 D Xdrive E91?

The safest way is to select your car's make, model and engine in our vehicle selector. We have 3 different propeller shafts matched to ensure an exact fit for your model.

Can I replace just the ABS ring, or do I need to buy a complete drive shaft?

On the BMW E91, you can often replace just the ABS ring if the driveshaft itself is otherwise in good condition. We supply individual ABS rings to make the repair significantly more cost-effective.

What does the fitment guarantee at CVJoint24 cover?

It means we guarantee the part will fit your BMW 3 Serie 320 D Xdrive E91 when selected via our make, model and engine search, giving you complete peace of mind with your purchase.