BMW 3 Serie 320 I E36

Spare parts and drivetrain components for the BMW 3 Serie 320 I E36. Select your make, model and engine to ensure correct fitment before ordering.

Products for BMW 3 Serie 320 I E36

17 products
1 - 17 of 17
Item no.:6180212
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 625 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0221856
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:0382302
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:510759
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 675 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:416347
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 625 mm
  • ABS teeth: 48
Item no.:0485135
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 94 mm
Item no.:616300
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 625 mm
  • Joint diameter: 86 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:618490
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0949150
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:695899
  • Position: Rear
Item no.:643278
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
Item no.:645886
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 64 mm
  • Total length: 126,5 mm
  • ABS teeth: 48
Item no.:691836
  • Position: Rear
Item no.:699150
  • Position: Rear
Item no.:612321
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 618 mm
  • Joint diameter, gearbox side: 94 mm
  • ABS teeth: 48
Item no.:7302131
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48

Drivetrain for BMW 3 Serie 320 I E36

The BMW 3 Serie 320 I E36 is an iconic model that demands top-quality components to retain its dynamic driving characteristics. The drivetrain in this car is engineered to transfer power from the six-cylinder engine directly to the rear wheels with absolute precision. As specialists in the BMW 3 Serie, we understand the importance of every component in the power transmission working in perfect harmony. Worn components can quickly ruin the driving experience and cause costly secondary damage if not addressed promptly.

Our product range for the 320 I E36 is carefully selected to cover the most critical drivetrain requirements. We focus on parts that meet or exceed original equipment specifications, which is essential for a car that is often driven enthusiastically. By choosing the correct spare parts, you ensure your BMW remains safe on the road and retains its value over time. We offer technical expertise and a comprehensive inventory that makes it easy to find exactly what you need for your specific model year and configuration.

How the drivetrain is designed on the BMW 3 Serie 320 I E36

The drivetrain on a BMW 3 Serie 320 I E36 follows the classic rear-wheel-drive layout that BMW is celebrated for. Power originates in the engine and travels through the gearbox to a longitudinal propeller shaft. This shaft transfers torque to the differential mounted in the rear subframe. From the differential, power is then distributed to the road wheels via two drive shafts. This setup provides the car with its balanced weight distribution and responsive handling, but it also places strict demands on the balance of all rotating components.

The E36 platform utilises a multi-link rear suspension where the drive shafts must accommodate significant angular changes during suspension travel. This places high demands on constant velocity joint lubrication and the integrity of the CV boots. The prop shaft is split into sections with a centre bearing in the middle to minimise vibrations. Every component, from the smallest ABS ring to the complete drive shaft, plays a vital role in ensuring the car runs smoothly and safely without noises or imbalance.

Common faults and symptoms

There are several clear warning signs that drivetrain components on your BMW 320 I E36 are wearing out. One of the most frequent symptoms is vibration felt through the bodyshell during acceleration or at specific road speeds. This is often caused by prop shaft imbalance or a worn centre bearing. If you hear a clicking noise while cornering or manoeuvring at low speeds, this is a classic symptom that an outer CV joint on one of the driveshafts has started to fail, usually due to a split CV boot.

Another common issue on E36 models is the ABS warning light illuminating or the ABS kicking in unpredictably. This is frequently caused by a cracked or corroded ABS ring on the rear axle. Because the reluctor ring is exposed to road dirt and moisture, it can expand over time, striking the sensor or triggering erroneous signals. Paying attention to these symptoms and acting quickly not only saves money, but also prevents you from being stranded at the roadside with a drivetrain failure.

Common parts to replace on the BMW 3 Serie 320 I E36

When maintaining the drivetrain on a 320 I E36, certain components are more prone to needing replacement due to age and mileage. A complete drive shaft for the BMW 3 Serie 320 I E36 is a standard investment to resolve vibrations and noises from the rear axle. We stock multiple variants to cater for the different technical specifications across the model lifecycle. Replacing the entire shaft is often far more cost-effective than attempting to rebuild worn joints.

In addition to drive shafts, a propeller shaft for the BMW 3 Serie 320 I E36 or its related components should be inspected. Vibrations resonating throughout the cabin can frequently be traced back here. Finally, a replacement ABS ring for the BMW 3 Serie 320 I E36 is a very common spare part. It is a small yet crucial component that restores the proper operation of the braking system. By renewing these parts with high-precision replacements, you ensure your BMW performs just as it did when leaving the factory.

How to find the right part for your BMW 3 Serie 320 I E36

Navigate directly to the appropriate section for the BMW 3 Serie 320 I E36:

On a vehicle with several possible drivetrain issues, it is wise to start in the correct category straight away. By comparing the dedicated product categories for the BMW 3 Serie 320 I E36, it becomes easier to diagnose between drive shaft, CV joint or propeller shaft faults and proceed to the page that best matches your symptoms and fitment.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-quality drivetrain and transmission components across the EU from our warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a comprehensive range tailored to European vehicles. When you order from us, you receive not only premium spare parts, but also the confidence of our precise fitment guarantee. We understand the importance of getting your car back on the road without delay, which is why we process orders promptly to keep workshop downtime to a minimum.

Our commitment to quality means we exclusively partner with manufacturers who meet rigorous production standards, delivering parts designed to endure for many thousands of kilometres. By specialising in driveline systems, we offer a depth of knowledge that general car parts retailers rarely match. We help you choose the right part the first time, saving both time and expense. With accurate fitment and a customer support team that understands technical driveline details, we are the trusted choice for BMW owners who insist on quality and reliability.

Frequently Asked Questions about Drivetrain for BMW 3 Series 320 i E36

How do I know if the drive shaft on my BMW 320i E36 needs replacing?

The most common signs are a clicking noise during sharp turns or vibrations under acceleration. If the CV boot is split and grease has leaked out, there is a high risk that the CV joint is damaged and the entire drive shaft should be inspected.

Why does my BMW E36 vibrate at speeds around 80-100 km/h?

Vibrations at these speeds are often caused by an imbalance in the propeller shaft, a worn centre bearing or a failing propshaft coupler (guibo). It is important to inspect the prop shaft mountings and bearings to eliminate the vibrations.

Does the same ABS ring fit all BMW 3 Series E36 models?

No, there can be variations in diameter and tooth count depending on the model year and specific equipment packages. Always select your make, model and engine to find the exact replacement ABS ring for your 320i.

Is it difficult to replace a drive shaft on a BMW 320i E36 yourself?

It requires proper tools and some mechanical experience, as the drive shaft is bolted to both the differential and the wheel hub. For a DIY mechanic with the right equipment, it is an achievable job, though adhering to correct torque specifications is crucial.

What is the fitment guarantee at CVJoint24?

It means that when you select your vehicle's make, model and engine on our website and order the recommended part, we guarantee it will fit your car. This gives you complete peace of mind with your purchase.

How quickly are parts delivered for my BMW?

We aim to dispatch all in-stock items as quickly as possible. If you place your order early, it is normally sent out the same day from our Swedish warehouse so you can begin your repair without unnecessary delay.