BMW 3 Serie 320 I E90

Spare parts and drivetrain components for the BMW 3 Serie 320 I E90. Select your make, model and engine to ensure an exact fit before ordering.

Products for BMW 3 Serie 320 I E90

26 products
1 - 24 of 26
Item no.:649800
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:656114
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0347286
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:0269076
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0202094
  • Total length: 1,610 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 14 mm
Item no.:0213566
  • Total length: 1,477 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
Item no.:0326885
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:4189873
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:513441
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:643397
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:653935
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:698676
  • Position: Rear
Item no.:699895
  • Position: Rear
Item no.:0666161
  • Position: Rear
Item no.:645769
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:417377
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:513443
  • Splines wheel side: 27
  • Total length: 665 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:6554746
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0446674
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:646837
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:515278
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 672 mm
  • Joint diameter: 83 mm
  • Joint diameter, gearbox side: 93 mm
Showing 1–24 of 26 products

Drivetrain for BMW 3 Serie 320 I E90

The BMW 3 Serie 320 I E90 represents an era of German engineering where driving dynamics and precision take centre stage. Maintaining that distinctive driving feel requires a drivetrain in first-class condition. The drivetrain is the system that transfers engine power onto the tarmac, and in a 320i E90 every component is calibrated to deliver a well-balanced experience. At CVJoint24, we are specialists in these exact components and offer a range tailored to your car's specific requirements. With a comprehensive selection for this model variant, we ensure you will find the right parts for your repair or maintenance work.

Maintaining the drivetrain on a BMW 3 Serie is vital for both safety and comfort. Worn components can cause unwanted noises as well as adversely affecting handling stability and fuel economy. By choosing the right parts from a specialist, you ensure your car continues to perform exactly as it did from the factory. We focus on offering parts with the highest relevance and category depth, making us the trusted choice for BMW drivers across Europe.

How the drivetrain is engineered on the BMW 3 Serie 320 I E90

The drivetrain of a BMW 3 Serie 320 I E90 relies on a classic rear-wheel-drive layout, which is fundamental to the car's balanced weight distribution. Power generated by the four-cylinder petrol engine travels through the gearbox to a central propeller shaft. This prop shaft runs along the underside of the vehicle and transmits torque to the rear axle differential. From the differential, power is directed to the wheels via two drive shafts. This mechanical chain requires every part to work in total harmony to prevent vibration and loss of power.

The E90 generation is renowned for its robust build, but its components are subjected to significant mechanical stress, particularly during spirited driving. The propeller shaft is fitted with a centre bearing and universal joints that must remain in sound condition to avoid imbalance. In turn, the drive shafts feature inner and outer CV joints protected by flexible CV boots. If a CV boot splits, grit enters and grease leaks out, rapidly destroying the joint. Understanding this assembly is the first step towards diagnosing and resolving issues early.

Common faults and symptoms

There are several distinct signs indicating that the drivetrain on your BMW 3 Serie 320 I E90 requires attention. One of the most frequent symptoms is a vibration felt through the bodywork or seat during acceleration. This typically points to imbalance or wear in the propeller shaft or its centre bearing. If you hear a rhythmic clicking noise when cornering at low speeds, this is a classic symptom of a worn outer CV joint on a drive shaft. Vibrations that occur exclusively at specific road speeds can also stem from an unbalanced driveline.

Another common issue on E90 models involves the ABS system. If the ABS warning light illuminates or the system intervenes unexpectedly during normal braking, it is often caused by a corroded or cracked ABS ring. Because the ABS reluctor ring is pressed onto the drive shaft, rust underneath can cause it to swell and misalign the sensor signal. Catching these warning signs early helps you avoid costly consequential damage and keeps your BMW safe on the road. Prompt diagnosis is the key to cost-effective ownership.

Common parts to replace on the BMW 3 Serie 320 I E90

When it is time to replace drivetrain components on your BMW 3 Serie 320 I E90, choosing parts that meet rigorous standards is essential. Our range for this model includes:

  • Drive shaft for BMW 3 Serie 320 I E90 – dedicated options engineered for exact lengths and spline counts.
  • Propeller shaft for BMW 3 Serie 320 I E90 – multiple variants available to cover all specifications for this model.
  • ABS ring for BMW 3 Serie 320 I E90 – 2 high-grade rings designed to resolve ABS sensor signal faults.

These components are vital for proper vehicle operation. A replacement drive shaft cures knocking noises and shuddering, while a precision-balanced prop shaft restores smooth running at motorway speeds. The ABS ring is a small yet crucial part that is considerably cheaper to renew than an entire driveshaft if caught in time. We always recommend inspecting adjacent components such as CV boots and axle mountings whenever replacing major drivetrain parts.

How to find the right part for your BMW 3 Serie 320 I E90

Navigate directly to the relevant category for your BMW 3 Serie 320 I E90:

When addressing driveline issues, selecting the correct subcategory from the outset saves valuable time. By comparing the exact component sections for the BMW 3 Serie 320 I E90, you can readily distinguish between drive shaft, CV joint, or prop shaft faults and choose the page matching your symptoms and specifications.

Our aim is to make finding the right part straightforward on the first attempt. If you are unsure which component is causing your issues, you can always rely on our technical expertise in BMW 3 Serie drivetrains. We have organised our catalogue to lead you logically from symptom to the correct spare part. With our accurate fitment guidance, you can be confident that the parts delivered will fit your car perfectly.

Why shop at CVJoint24

CVJoint24 is not merely another general motor factor; we are a dedicated Swedish driveline specialist focusing deeply on drive shafts, prop shafts, and power transmission components. When you purchase from us, you benefit from specialist product knowledge that broad aftermarket retailers rarely offer. We understand the technical details of a BMW and curate our catalogue accordingly. Our insistence on quality and precise fitment guarantees that you receive the correct replacement for your BMW 3 Serie 320 I E90.

Operating from our Swedish central warehouse, we deliver fast across the European Union to minimise workshop downtime. Supported by dedicated fitment support and straightforward returns, you can order with absolute peace of mind. We aim to be the most dependable driveline partner for European car owners needing reliable drivetrain components. Combining specialist engineering knowledge with attentive customer service, we ensure your buying experience is as smooth as your vehicle's drive.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Series 320 i E90

How do I know if my BMW 320i E90 needs a new drive shaft?

The most common signs are clicking noises when making sharp turns or vibrations under acceleration. Also check if the CV boot is split or torn, as this often leads to drive shaft failure requiring a complete replacement.

Why does my BMW 3 Series E90 vibrate at higher speeds?

Vibrations at higher speeds are often caused by an unbalanced propeller shaft or a worn centre bearing. We stock several prop shafts specifically tailored for the 320i E90 to resolve this issue.

Can I replace just the ABS ring on my BMW E90?

Yes, if your drive shaft is otherwise in good condition, you can replace just the ABS ring. This is a common solution when rust has caused the original reluctor ring to crack and interfere with the ABS sensor.

Do all BMW 3 Series drive shafts fit my 320i E90?

No, drive shafts vary depending on the engine variant, gearbox and model year. Always filter by your exact make, model and engine in our shop to find the precise part.

What does the fitment guarantee at CVJoint24 cover?

Our fitment guarantee means we guarantee the part will fit your BMW 3 Series 320 i E90 when you select your vehicle's correct make, model and engine details and choose a recommended product.

How quickly will parts for my BMW be delivered?

We dispatch all in-stock items promptly so you can get your car back on the road without delay.