BMW 3 Serie 320 I E93

Drivetrain components and spare parts for the BMW 3 Serie 320 I E93. Please confirm vehicle make, model and engine variant before ordering.

Products for BMW 3 Serie 320 I E93

22 products
1 - 22 of 22
Item no.:0376093
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:4149971
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 613 mm
  • Joint diameter: 83 mm
  • Joint diameter, gearbox side: 93 mm
Item no.:5114371
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 672 mm
  • Joint diameter: 83 mm
  • Joint diameter, gearbox side: 93 mm
Item no.:5126625
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 664 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:0225488
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0305191
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:4160676
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter: 86 mm
  • ABS teeth: 48
Item no.:645601
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Thread size: M24X1,5
Item no.:655391
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 69 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:623852
  • Total length: 1,477 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
Item no.:6572980
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0472238
  • Position: Rear, Inner
  • Inner splines: 24
  • Outer diameter: 92 mm
Item no.:648366
  • Position: Rear, Inner
  • Inner splines: 24
  • Seal diameter: 69,3 mm
  • Total length: 119 mm
  • Outer splines: 27
Item no.:653818
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:695385
  • Position: Rear
Item no.:694171
  • Position: Rear
Item no.:0626748
  • Position: Rear
Item no.:645085
  • Position: Rear, Inner
  • Inner splines: 24
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:412689
  • Splines wheel side: 27
  • Total length: 612 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5
Item no.:519174
  • Splines wheel side: 27
  • Total length: 665 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M24x1.5

Drivetrain for BMW 3 Serie 320 I E93

The BMW 3 Serie 320 I E93 is a technically advanced car where the drivetrain plays a pivotal role in delivering the renowned driving experience. As the owner of an E93, the convertible version of the popular BMW 3 Serie, you know that precision is paramount for both comfort and safety. The drivetrain in this model is engineered to handle the torque from the four-cylinder engine and deliver power efficiently to the rear wheels, even when the roof is down and the car's weight distribution shifts. At CVJoint24, you will find a dedicated range tailored specifically to this vehicle configuration.

We understand the unique demands placed on components in a rear-wheel-drive BMW, where balancing durability and weight is critical to preserving the car's sporty character. Selecting the right parts from the outset ensures your car maintains its original dynamics and road safety. Our catalogue for the E93 is carefully curated to meet the high standards expected of a modern premium vehicle, whether for daily commuting or spirited summer driving along winding roads.

How the drivetrain is engineered on the BMW 3 Serie 320 I E93

The layout of the drivetrain on a BMW 3 Serie 320 I E93 follows the brand's classic front-engine, rear-wheel-drive configuration. Power travels from the gearbox via a propeller shaft to the rear differential. From the differential, power is distributed to the wheels via two drive shafts. Because the E93 is a convertible, the chassis incorporates specific reinforcements that can alter clearances around certain drivetrain components, making an exact fit for this specific body style essential.

The system also relies on critical components such as ABS rings, mounted on the drive shafts to supply precise wheel speed signals to the car's stability and braking systems. Every part of this assembly must work in perfect harmony to prevent vibrations and ensure smooth power delivery. A properly functioning prop shaft with a healthy centre bearing is crucial for eliminating cabin resonance—something particularly noticeable in a convertible, where acoustic insulation differs from a saloon or coupé. We supply components designed to preserve this refinement over the long term.

Common faults and symptoms

There are several telltale signs that drivetrain components on your BMW 3 Serie 320 I E93 are wearing out. One of the most common symptoms is a shudder or vibration felt through the bodyshell during acceleration, frequently traced to an unbalanced propeller shaft or worn joints on the drive shafts. If you hear a distinct clicking noise on full steering lock or when pulling away, a CV joint may be failing. Because the E93 is heavier than its fixed-roof counterparts due to the folding roof mechanism, the rear axle components endure higher loads during launch and hard acceleration.

Another common issue on this generation is corrosion affecting the ABS reluctor ring. As the ring rusts, it expands and can contact the ABS sensor, triggering ABS warning lights or causing the traction control system to intervene unnecessarily during normal driving. Ignoring these symptoms can lead to more expensive secondary damage across the drivetrain or even compromise braking performance. Early diagnosis and timely replacement of worn parts are key to trouble-free motoring.

Common replacement parts for the BMW 3 Serie 320 I E93

Based on our experience and data, certain components on the BMW 3 Serie 320 I E93 are replaced more frequently to keep the car running smoothly. Drive shafts endure heavy loads, and their CV boots can split over time, allowing grease to escape and road dirt to ruin the joint. We supply complete driveshafts ready to fit, which is often far more cost-effective than overhauling worn original units. The propeller shaft is another assembly that merits attention, particularly its universal joints and centre bearing, which naturally wear over many kilometres.

In our range for this model, you will find key categories essential for maintaining your vehicle:

  • Drive shafts for BMW 3 Serie 320 I E93 – For dependable power delivery to the rear wheels.
  • Propeller shafts for BMW 3 Serie 320 I E93 – The central shaft transferring torque from the gearbox to the rear axle.
  • ABS rings for BMW 3 Serie 320 I E93 – Ensuring proper operation of the braking and stability control systems.
By keeping these parts in stock for prompt dispatch, we help you keep your BMW in peak condition without unnecessary downtime.

How to find the correct part for your BMW 3 Serie 320 I E93

Proceed to the relevant section for your BMW 3 Serie 320 I E93:

When troubleshooting a vehicle with several possible drivetrain issues, it pays to start in the correct category straight away. Comparing the dedicated sections for the BMW 3 Serie 320 I E93 makes it straightforward to distinguish between faults in a drive shaft, CV joint, or propeller shaft, directing you to the exact match for your symptoms and fitment needs.

Finding the right spare parts does not have to be difficult. We have made locating components for your BMW 3 Serie 320 I E93 simple: simply filter our range by selecting your vehicle's make, model, and engine variant. This narrows the catalogue down to parts confirmed to match your specific engine, gearbox, and model year. This is particularly crucial for the E93, as drive shaft lengths and propeller shaft flange configurations can vary depending on whether the car is fitted with a manual or automatic transmission.

We always recommend verifying technical specifications such as tooth counts on ABS rings or flange dimensions on prop shafts, as BMW introduced revisions throughout the production run. Our database is refined to give you accurate search results every time. If you have any questions, our knowledgeable team is on hand to guide you to the correct parts. We want you to order with complete confidence and enjoy a straightforward, hassle-free installation in the garage.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality drivetrain components across the European Union. Unlike general car parts retailers, we specialise deeply in driveline and transmission components. When purchasing parts for your BMW 3 Serie 320 I E93 from us, you benefit from our dedicated fitment guarantee. Our products are dispatched from our central warehouse in Helsingborg, Sweden, ensuring fast, dependable delivery across the EU so you can get your car back on the road without delay.

Our product range is selected to meet or exceed original equipment standards, offering substantial savings compared to main-dealer prices. We strive to provide the right part first time, saving you time and labour costs in the workshop. By pairing specialist technical expertise with efficient EU-wide logistics, we are the trusted choice for BMW drivers who value quality and precision. Choose an expert that understands your drivetrain inside out, providing parts you can rely on for countless kilometres ahead.

Frequently Asked Questions about Drivetrain for BMW 3 Serie 320 I E93

How do I know if my BMW 3 Serie 320 I E93 needs a new drive shaft?

The most common symptoms are vibrations through the car under acceleration or a clicking noise during sharp turns. Also check whether the CV boots are split, as this quickly leads to CV joint wear.

Can I replace just the ABS ring on my E93 rather than the entire drive shaft?

Yes, on the BMW 3 Serie 320 I E93 it is often possible to replace just the corroded ABS ring. We supply standalone ABS rings designed to be pressed onto the existing drive shaft, offering a very cost-effective repair.

Why are there vibrations coming from the propeller shaft on my BMW?

Vibrations are often caused by a worn centre bearing or an imbalance in the propeller shaft itself. On a convertible such as the E93, these vibrations can feel particularly noticeable. We recommend inspecting both the joints and bearings whenever an issue is suspected.

Do all 3 Series drive shafts fit my 320 I E93?

No, drive shafts vary depending on the engine variant, gearbox type and body style. It is therefore essential to select your car's exact make, model and engine in our vehicle selector to ensure you get a component with the correct length and splines.

How quickly can I have my spare parts delivered?

We dispatch quickly across Europe from our Swedish warehouse. Because we are a dedicated driveline specialist with our own stock, we ensure fast lead times so your BMW spends no more time in the garage than necessary.

What does your fitment guarantee mean for BMW parts?

Our fitment guarantee means we ensure the part you order fits your BMW 3 Serie 320 I E93, provided you have selected your exact vehicle make, model and engine. In the unlikely event that a part does not fit, we will help you find the correct one.