BMW 3 Serie 320 I F30 F80

Spare parts and drivetrain components for BMW 3 Serie 320 I F30 F80. Verify fitment by selecting your make, model and engine before ordering.

Products for BMW 3 Serie 320 I F30 F80

30 products
25 - 30 of 30
Item no.:6517436
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 28
  • Outer diameter: 90 mm
Item no.:0472423
  • Position: Inner
  • Inner splines: 30
  • Outer diameter: 75 mm
  • Splines wheel side: 27
Item no.:649138
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 43,9 mm
  • Total length: 147 mm
  • Outer splines: 27
Item no.:642233
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 25
  • Seal diameter: 57,4 mm
  • Total length: 133 mm
Item no.:0909487
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Item no.:693764
  • Position: Rear
Showing 25–30 of 30 products

Drivetrain for BMW 3 Serie 320 I F30 F80

The BMW 3 Serie 320 I F30 F80 represents a technically advanced generation where the drivetrain plays a central role in delivering that renowned driving experience. As a 320i owner, you appreciate that precision and responsiveness are paramount, placing exacting demands on every single component in the transmission of power. Whether your car is rear-wheel drive or equipped with xDrive all-wheel drive, it requires robust parts that can effectively handle the torque from the turbocharged engine. At CVJoint24, we specialise in providing premium spare parts that meet or exceed original equipment specifications for this exact model. By focusing on deep inventory coverage, we supply solutions covering everything from a simple CV boot to complete shafts, making us your natural partner for vehicle maintenance. Preserving the condition of your drivetrain is not merely a question of performance, but also of fuel economy and long-term reliability for your BMW.

How the drivetrain is engineered on the BMW 3 Serie 320 I F30 F80

The layout of the drivetrain in a BMW 3 Serie 320 I F30 F80 is a masterclass in engineering, focused on balance and efficiency. Power from the engine is routed through the gearbox to a central propeller shaft, which in turn distributes power to the differential on the rear axle. From the differential, drive shafts extend out to the wheels. The F30 platform employs sophisticated control arms and suspension designs that demand drive shafts capable of operating at varying articulation angles without losing efficiency or generating vibrations. For models equipped with all-wheel drive, a front prop shaft and front drive shafts are added, increasing the complexity of the system. Every part, from universal joints to centre bearings, is dimensioned to deliver seamless power transfer during both everyday commuting and spirited driving on winding roads. Understanding this layout is essential when diagnosing issues and selecting the correct spare parts for a repair.

Common faults and symptoms

Despite BMW's high quality standards, drivetrain components are subject to natural wear and environmental exposure over the vehicle's lifespan. One of the most common symptoms of a worn drive shaft is a clicking noise on full steering lock, which typically indicates that the outer CV joint has started to fail. Vibrations that occur specifically during acceleration can usually be traced back to the inner CV joints located closer to the gearbox or differential. If you experience vibrations felt throughout the entire cabin at higher speeds, it may point to an unbalanced propeller shaft or a failing centre bearing. It is also vital to keep an eye out for split CV boots; if grease leaks out and dirt enters, wear accelerates dramatically and can lead to complete failure. ABS rings can also corrode, triggering false signals to the vehicle's safety systems. Ignoring these early warning signs can result in far more costly repairs and potentially leave you stranded at the roadside.

Common parts to replace on the BMW 3 Serie 320 I F30 F80

For the BMW 3 Serie 320 I F30 F80, we see recurring demand for specific components in our range. Drive shafts are among the most sought-after parts, particularly for cars that have covered many kilometres or have been subjected to tough European winters with road salt and grime. The propeller shaft and its associated centre bearing are also critical items that may require attention to eliminate noises and vibrations. For this specific model, we currently offer the following categories:

  • Drive shafts for BMW 3 Serie 320 I F30 F80 – Matched to various drivetrain configurations.
  • Propeller shafts for BMW 3 Serie 320 I F30 F80 – Crucial for power transmission to the rear axle.
  • CV boots – A cost-effective way to protect expensive components against premature wear.
  • Centre bearings and doughnut couplings – Essential for dampening vibrations and ensuring smooth prop shaft rotation.

By replacing these parts in good time, you preserve the car's original handling characteristics and ensure power reaches the road efficiently without unnecessary energy loss.

How to find the right part for your BMW 3 Serie 320 I F30 F80

Proceed to the relevant section for your BMW 3 Serie 320 I F30 F80:

On a car where multiple drivetrain faults can produce similar symptoms, starting directly in the right category makes good sense. By comparing the dedicated component categories for the BMW 3 Serie 320 I F30 F80, it becomes simpler to distinguish between drive shaft, constant velocity joint or prop shaft faults, allowing you to proceed to the page that best matches your symptoms and fitment needs.

Finding the exact part for a BMW 3 Serie 320 I F30 F80 can occasionally prove challenging, as specifications vary depending on build month, equipment packages and whether the car is rear-wheel drive or xDrive. The most dependable way to navigate our extensive inventory is by filtering by your car's make, model and engine variant. This ensures you only see parts that are technically compatible with your specific vehicle. We also advise cross-referencing any original equipment manufacturer (OEM) part numbers if you have them, ensuring the replacement part matches what was factory-fitted. There can sometimes be differences in length or spline count on driveshafts, so an extra check against our detailed product specifications is always recommended. Our database is continually updated to maintain maximum catalogue precision, allowing you to order with complete confidence and avoid incorrect deliveries.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dedicated to helping drivers keep their vehicles in peak condition. When you choose us, you gain access to an in-depth expertise that few others can match, particularly for marques like BMW. We understand every detail of the BMW 3 Serie 320 I F30 F80 drivetrain and keep high-quality parts in stock at our central warehouse in Helsingborg, Sweden, shipping quickly across the EU. Our fitment guarantee means you can order with absolute peace of mind, knowing your part will fit your car when selected using our accurate make, model and engine tool. We combine rich technical know-how with an easy-to-use webshop so you can select the correct part first time and get your car back on the road without delay. With an emphasis on durable solutions, comprehensive range depth and competitive pricing, we are your trusted source for drivetrain and transmission components.

Frequently Asked Questions about Drivetrain for BMW 3 Serie 320 I F30 F80

How do I know if my BMW 320i F30 needs a new drive shaft?

The most common signs are clicking noises when cornering sharply (outer CV joint) or vibrations through the car under acceleration (inner CV joint). You should also inspect whether the CV boots are split or cracked.

Does the same propeller shaft fit all BMW 320i F30 models?

No, the prop shaft varies depending on whether your car has a manual or automatic gearbox, and whether it is rear-wheel drive or fitted with xDrive all-wheel drive.

What is included with a complete drive shaft for the BMW 3 Serie 320 I F30 F80?

Our complete drive shafts are supplied fully assembled with both inner and outer CV joints as well as protective CV boots, ready for direct fitment to your car.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, in many cases you can replace just the worn constant velocity joint; however, if there is extensive wear or damage to the shaft splines, a complete driveshaft is often a safer and more cost-effective solution.

How does xDrive affect the choice of drive shafts for my BMW?

Vehicles with xDrive also have front drive shafts. These are shorter and designed differently from the rear driveshafts, making it essential to select the correct fitting position when ordering.

Why is it important to check the propeller shaft centre bearing?

A worn centre bearing causes vibrations and can ultimately damage both the gearbox and differential by creating unbalance throughout the entire drivetrain.