BMW 3 Serie 320 I Xdrive F31

Spare parts and drivetrain components for BMW 3 Serie 320 I Xdrive F31. Check fitment by make, model and engine before ordering.

Products for BMW 3 Serie 320 I Xdrive F31

38 products
25 - 38 of 38
Item no.:641458
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 44 mm
  • Joint diameter: 74 mm
  • Outer splines: 27
Item no.:659502
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 57,2 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:691448
  • Position: Rear
Item no.:394078
  • Position: Front
Item no.:693726
  • Position: Rear
Item no.:690474
  • Position: Rear
Item no.:626829
  • Position: Rear
  • Total length: 1,266 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 105 mm
  • Outer diameter 2: 16 mm
Item no.:514784
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 805 mm
  • Joint diameter: 77 mm
Item no.:518310
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 802 mm
Showing 25–38 of 38 products

Drivetrain for BMW 3 Serie 320 I Xdrive F31

The BMW 3 Serie 320 I Xdrive F31 combines sporty driving dynamics with practical Touring estate versatility and the all-weather capability of xDrive all-wheel drive. Maintaining this sharp driving feel demands a drivetrain in peak condition. The driveline components on this specific model endure substantial stress, especially during acceleration and on mixed road surfaces where power is continuously shifted between the front and rear axles. At CVJoint24, we understand the exacting technical requirements of the F31 generation and its sophisticated AWD setup. We specialise in components engineered to meet or exceed original equipment standards, protecting vital, costly assemblies such as the transfer box from premature wear. Fitting the right parts ensures your BMW delivers the balanced traction and responsiveness you expect. Our comprehensive range covers everything from precision CV joints to complete drive shafts, all tailored to the torque output of the 320i engine and the unique geometry of the xDrive system. Caring for the drivetrain on your BMW 3 Serie is an essential investment in safety, handling, and long-term resale value.

How the drivetrain works on BMW 3 Serie 320 I Xdrive F31

The drivetrain layout on the BMW 3 Serie 320 I Xdrive F31 represents sophisticated automotive engineering. Torque from the turbocharged 320i petrol engine passes through the gearbox into a central transfer box. From here, power is distributed via propeller shafts to the front and rear differentials. The differentials then transfer this torque to each wheel through drive shafts equipped with precision inner and outer CV joints. On an xDrive model like the F31 Touring, every component must operate in perfect unison. Because the system actively adjusts power distribution according to available grip, even minor play or unbalance in a prop shaft can produce vibrations that resonate throughout the entire chassis. System tolerances are tight, and the front driveshafts are typically shorter and face steeper operating angles than the rear ones. Understanding this layout is essential when selecting replacement car parts, as the mechanical tolerances for all-wheel-drive 3 Series models are significantly stricter than those for rear-wheel-drive variants.

Common faults and symptoms

Spotting drivetrain issues early helps prevent costly consequential damage and avoids roadside breakdowns. On a BMW 3 Serie 320 I Xdrive F31, one of the most frequent indicators of wear is a rhythmic clicking or snapping sound on full steering lock at low speeds. This typically points to a worn outer CV joint suffering from material fatigue or grit contamination. If you feel noticeable vibrations through the floorpan or driver's seat under hard acceleration, a worn inner CV joint or an out-of-balance drive shaft is often the cause. For xDrive vehicles, it is equally important to listen for a persistent hum or whining noise from beneath the centre of the car, which usually stems from a failing propeller shaft centre bearing or universal joint. Another critical checkpoint is grease leakage from the CV boots; if a boot splits or cracks, the protective grease escapes quickly while road dirt enters, rapidly destroying the internal joint races. Addressing these noises and vibrations promptly also safeguards your car's sensitive transfer box from strain.

Common parts to replace on BMW 3 Serie 320 I Xdrive F31

Certain drivetrain components on the F31 xDrive bear higher mechanical loads over time. Our catalogue includes a comprehensive selection of replacement parts to restore reliable power transfer to every wheel. Key categories for your BMW include:

  • Drive shafts for BMW 3 Serie 320 I Xdrive F31 (for various axle positions)
  • Propeller shafts for BMW 3 Serie 320 I Xdrive F31 (for smooth torque transfer)
  • Outer CV joints for BMW 3 Serie 320 I Xdrive F31 (for the front axle)
  • Inner CV joints for BMW 3 Serie 320 I Xdrive F31 (for precision driveline balance)
A drive shaft must absorb constant steering angles and suspension travel while handling engine torque smoothly. High-mileage vehicles frequently require replacement propeller shafts, and we supply fully balanced units that eliminate drivetrain shudder. Choosing the correct specification ensures your replacement part matches both the power output and the critical front-to-rear rotational requirements of the xDrive system.

Find the right part for BMW 3 Serie 320 I Xdrive F31

Select the specific category for your BMW 3 Serie 320 I Xdrive F31:

When diagnosing drivetrain faults, starting with the right subcategory saves valuable time. By browsing the specific sections for the BMW 3 Serie 320 I Xdrive F31, you can easily distinguish between drive shaft, CV joint, or prop shaft issues and choose the component that best matches your symptoms and fitting requirements.

Locating the correct parts for a technically advanced car like the BMW 3 Serie 320 I Xdrive F31 is straightforward with our system. Simply filter by your car's make, model, and engine variant to display parts designed specifically for your chassis configuration. It is always wise to double-check technical specifications such as the spline count on the CV joint and the overall compressed length of the shaft, as subtle variations occur depending on production date and gearbox options. On xDrive models, ensure the component is explicitly listed for all-wheel-drive use, as dimensions and load ratings differ from rear-wheel-drive models. If you are unsure whether you need a complete driveshaft assembly or an individual constant velocity joint, check the original part number or physical dimensions on your existing unit. Our expert customer support and technical resources are always here to help you get the right part delivered straight to your door.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. When ordering components for your BMW 3 Serie 320 I Xdrive F31, you benefit from focused expertise that general car-parts retailers simply cannot match. We combine a curated catalogue with an accurate fitment approach so you can order with confidence, knowing the part will fit your vehicle straight away. This precision helps you get the right component first time, avoiding costly workshop delays. With fast dispatch directly from our stock across Europe, we help get your car back on the road without delay. Our goal is to provide high-quality driveline components at fair prices so your BMW stays durable and dependable over many kilometres. Trust a dedicated specialist for your driveline parts – choose CVJoint24 for professional service every time.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Series 320 i xDrive F31

How do I know if my BMW 320i xDrive needs a new drive shaft?

The most common signs are vibrations under acceleration or unusual noises, such as clicking when cornering. If you notice a torn CV boot and grease has leaked out, there is a high risk that the drive shaft or CV joint needs replacing.

Can I replace just the CV joint instead of the complete drive shaft on my F31?

Yes, in many cases you can replace just the outer or inner CV joint if the shaft itself is undamaged. This is often a cost-effective way to repair wear and tear.

Why are xDrive parts different from standard BMW parts?

The xDrive system requires specific dimensions and strength ratings to handle power distribution between the front and rear axles. Parts intended for rear-wheel-drive models rarely fit an xDrive car.

What are the most common signs of a worn propeller shaft?

A worn propeller shaft often causes vibrations felt throughout the entire vehicle, especially at certain speeds, as well as a clunking noise when changing load.

How does the fitment guarantee work at cvjoint24.com?

Our fitment guarantee means that if you select your car by make, model and engine variant to find your part and it unexpectedly does not fit, we will help you find the correct part or issue a full refund.

Do the parts fit both the front and rear axles of my BMW 320i xDrive?

No, drive shafts and CV joints differ between the front and rear axles. It is essential to verify the fitting position (front/rear, left/right) before ordering.