BMW 3 Serie 325 D E90

Spare parts and drivetrain components for the BMW 3 Serie 325 D E90. Confirm compatibility using your make, model and engine before ordering.

Products for BMW 3 Serie 325 D E90

26 products
1 - 24 of 26
Item no.:0371144
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:6192282
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 651 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1112980
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 598 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:0280311
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:4109363
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:5189767
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:656952
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Total length: 132 mm
Item no.:457414
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 135 mm
Item no.:0856477
  • Inner diameter: 35 mm
  • Bearing thickness: 14 mm
  • Hole spacing c/c: 160 mm
Item no.:6551107
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:0480019
  • Position: Rear, Inner
  • Inner splines: 28
  • Outer diameter: 108 mm
Item no.:613660
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 657 mm
  • Flange diameter: 108 mm
  • ABS teeth: 48
Item no.:696355
  • Position: Rear
Item no.:649461
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 30
  • Seal diameter: 58,7 mm
  • Total length: 131 mm
Item no.:643037
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:0447823
  • Position: Rear, Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Joint diameter: 108 mm
Item no.:0958795
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:693943
  • Position: Rear
Item no.:696494
  • Position: Rear
Item no.:0626130
  • Position: Front
Item no.:649409
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 86 mm
  • Joint diameter: 99 mm
Showing 1–24 of 26 products

Drivetrain for BMW 3 Serie 325 D E90

The BMW 3 Serie 325 D E90 is renowned for its balanced blend of potent diesel performance and classic rear-wheel drive. To preserve these dynamic driving characteristics, the drivetrain must remain in peak condition. The drivetrain is the core of the vehicle's power transmission, and every part—from the gearbox to the wheel hubs—plays an essential role. Here at CVJoint24, you will find a dedicated range tailored specifically for this model. We understand the technical demands placed on a BMW 325 D, where the torque of the six-cylinder engine requires immense strength from both drive shafts and propeller shafts. By selecting the right spare parts, you safeguard both your car's reliability and its long-term value. We focus on offering components with an exact fit, which is vital for a vehicle engineered with the precise handling dynamics of the E90 series. We are a Swedish driveline specialist combining in-depth technical knowledge with a comprehensive stock range for your BMW.

How the drivetrain is engineered on the BMW 3 Serie 325 D E90

Power delivery in a BMW 3 Serie 325 D E90 relies on a traditional, highly efficient rear-wheel-drive layout. Engine output passes through the gearbox to a central propeller shaft running along the underside of the car. This prop shaft transmits torque to the rear differential, which distributes power to the wheels via two drive shafts. For this specific model, we have identified a clear demand for premium components, reflected in our range of various drive shafts and propeller shaft variants to suit different technical specifications. In addition, the assembly uses an ABS ring BMW 3 Serie 325 D E90 integrated into the drivetrain to feed the ABS and stability control systems with precise wheel-speed data. Understanding this design helps when diagnosing issues, as every component in the system impacts overall performance. Imbalance in a prop shaft or wear in a CV joint can quickly transmit stress and cause premature wear across other driveline parts.

Common faults and symptoms

Symptoms of drivetrain failure on a BMW 325 D E90 can vary, yet they are typically clear to an observant driver. One of the most frequent signs of a worn propeller shaft BMW 3 Serie 325 D E90 is vibration felt through the bodyshell, especially at certain road speeds or under hard acceleration. This is often caused by failing universal joints or a deteriorated centre bearing. If you instead notice a clicking noise on tight turns or vibrations that intensify with wheel speed, it typically indicates a worn drive shaft BMW 3 Serie 325 D E90 or worn CV joints. Another common issue on E90 models is an illuminated ABS warning light or erratic traction control intervention. This is usually caused by corrosion building up under the ABS reluctor ring, forcing it to expand or crack and send faulty readings to the sensor. Ignoring these warning signs can result in costly damage or an untimely breakdown, making prompt diagnosis and repair a sensible investment.

Common parts to replace on the BMW 3 Serie 325 D E90

When carrying out maintenance on your BMW 3 Serie 325 D E90, certain parts face heavier stress than others. Drive shafts continuously handle high torque loads and road grime, making them a common replacement item. We stock 6 different drive shaft variants to cover the technical variations found across the E90 platform. The prop shaft is another critical component, for which we supply dedicated replacements that match BMW's original specifications for balance and durability. Alongside these major assemblies, the ABS ring is a small yet crucial part. As the E90 frequently suffers from rust-swollen rings, this is one of our most requested items to restore proper safety system operation. By replacing worn parts with components from our catalogue, you ensure your car receives parts built to withstand the torque of a strong turbodiesel engine. We always recommend inspecting CV boots and mounting hardware whenever fitting a new driveshaft to maximise the service life of your new component.

How to find the right part for the BMW 3 Serie 325 D E90

Navigate directly to the relevant subcategory for your BMW 3 Serie 325 D E90:

When dealing with multiple potential driveline issues, starting in the correct category saves valuable time. By comparing the dedicated product groups for the BMW 3 Serie 325 D E90, you can easily isolate problems affecting the drive shaft, constant velocity joint or prop shaft, and proceed straight to the page that matches your symptoms and specifications.

Once you have selected the right category, you can rely on our accurate fitment data. We have matched part numbers and technical details so you can focus on the job itself. If you require further assistance, our customer support team is always on hand to guide you through our comprehensive selection of All car makes driveline parts. We ensure the correct parts are dispatched directly to your door.

Why shop with CVJoint24

CVJoint24 is not just another car parts retailer; we are a Swedish driveline specialist dedicated entirely to drivetrain components. By specialising, we deliver technical expertise and an extensive stock profile that general motor factors often lack. For your BMW 3 Serie 325 D E90, this means direct access to high-grade parts chosen for their long-term dependability. We understand the importance of getting your car back on European roads quickly, maintaining a strong warehouse inventory ready for dispatch across the EU. With our precise model-selection tools and fitment assurance, you can order with absolute confidence. We strive to have the right item in stock, whether you need a complete propeller shaft or an individual ABS ring. Choosing us means partnering with driveline specialists committed to the performance of your vehicle and your peace of mind.

Frequently asked questions about drivetrain parts for BMW 3 Series 325 d E90

How do I know if the drive shaft on my BMW 325 d E90 needs replacing?

Common signs include clicking noises when turning, vibrations under acceleration, or visible damage to the CV boots leaking grease.

Do all propeller shafts fit the BMW 3 Series E90?

No, the propeller shaft varies depending on the engine, gearbox, and whether the car is rear-wheel drive or four-wheel drive. Select your car's make, model, and engine to find the correct part.

Why is the ABS warning light on in my BMW E90?

A very common fault is that the ABS ring on the drive shaft has corroded and swollen, preventing the sensor from reading the wheel's rotation accurately.

Can I replace just the ABS ring instead of the entire drive shaft?

Yes, on the BMW E90 it is often possible to replace only the ABS ring if the drive shaft itself is otherwise in good condition, making it a cost-effective solution.

Do you offer a fitment guarantee on parts for BMW 325 d?

Yes, when you select your vehicle's make, model, and engine on cvjoint24.com, your purchase is covered by our fitment guarantee for total peace of mind.

How quickly are my drivetrain parts delivered?

We offer fast delivery across Europe on in-stock items so you can get your BMW 3 Series 325 d E90 back on the road as quickly as possible.