BMW 3 Serie 325 D E93

Spare parts and drivetrain components for BMW 3 Serie 325 D E93. Check fitment by make, model and engine before ordering.

Products for BMW 3 Serie 325 D E93

23 products
1 - 23 of 23
Item no.:0311780
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:6195952
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 651 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1195878
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 598 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:4133532
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:5188691
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:655986
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Total length: 132 mm
Item no.:453378
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 135 mm
Item no.:0868076
  • Inner diameter: 35 mm
  • Bearing thickness: 14 mm
  • Hole spacing c/c: 160 mm
Item no.:6584324
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:0463769
  • Position: Rear, Inner
  • Inner splines: 28
  • Outer diameter: 108 mm
Item no.:619748
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 657 mm
  • Flange diameter: 108 mm
  • ABS teeth: 48
Item no.:690273
  • Position: Rear
Item no.:647286
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:0402072
  • Position: Rear, Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Joint diameter: 108 mm
Item no.:0984698
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:690742
  • Position: Rear
Item no.:695631
  • Position: Rear
Item no.:0667802
  • Position: Front
Item no.:649826
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 86 mm
  • Joint diameter: 99 mm
Item no.:658437
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Joint diameter: 87 mm
Item no.:316624
  • Splines wheel side: 25
  • Total length: 26 mm
  • Thread size: M27x1.5

Drivetrain for BMW 3 Serie 325 D E93

The drivetrain for the BMW 3 Serie 325 D E93 is fundamental to the car's performance and driving experience. As the owner of a BMW 325d E93, you drive a car that blends the elegant design of a convertible with the potent, torque-rich diesel engine for which BMW is renowned. This pairing places unique demands on the driveline. Because the engine produces high torque from low revs, components such as drive shafts and propeller shafts are subjected to severe stresses every time you accelerate. At CVJoint24, we are specialists in these exact parts and appreciate the need for every component to meet the highest standards to cope with the forces involved.

Our range is carefully selected to suit the specific setup of the BMW 3 Serie 325 D E93, ensuring your car retains its original driving dynamics and safety. Choosing the correct parts from a specialist helps you extend the lifespan of your vehicle and prevent unnecessary garage repairs down the line. We focus on offering parts that meet or exceed original specifications, which is essential for a premium car in the BMW 3 Serie. Whether carrying out scheduled maintenance or urgent repairs, we are your partner for all drivetrain needs.

How the drivetrain is configured on the BMW 3 Serie 325 D E93

The driveline layout of the BMW 3 Serie 325 D E93 follows BMW's traditional rear-wheel-drive principle, providing its characteristic balance and driving pleasure. Power is generated by the straight-six diesel engine and transmitted via the gearbox to a central BMW 3 Serie 325 D E93 propeller shaft. This shaft runs along the underside of the car and delivers torque to the differential on the rear axle. Because the E93 is a convertible featuring a folding metal hardtop, the chassis has a distinct weight distribution and structural rigidity that directly influence how vibrations and torque are managed across the driveline.

From the differential, torque is distributed to the rear wheels through two drive shafts. These shafts are fitted with CV joints that accommodate suspension travel whilst smoothly transferring rotational force. On the BMW 325d, these components are engineered to withstand the strong torque output of the diesel engine. It is an intricate system where every part, from the prop shaft centre bearing to the inner and outer constant velocity joints, must work in complete synchronisation. A failure in a minor component, such as a split CV boot, can rapidly let in dirt and destroy the joint entirely, highlighting the need for regular inspections of the entire drivetrain.

Common faults and symptoms

There are several telltale signs that driveline parts on your BMW 3 Serie 325 D E93 are worn. One of the most frequent symptoms is vibration felt through the bodyshell or seat under acceleration. This is often attributable to imbalance or wear within the propeller shaft joints or its centre bearing. If vibrations are felt through the steering wheel instead, or if you hear a rhythmic clicking noise during tight turns, it typically points to a failing outer CV joint on a BMW 3 Serie 325 D E93 drive shaft.

Another specific issue affecting many BMW owners relates to the electronic driver aids. If the ABS warning light illuminates or the dynamic stability control (DSC) intervenes unexpectedly under normal driving conditions, the cause is frequently a cracked or corroded BMW 3 Serie 325 D E93 ABS ring. These reluctor rings sit on the driveshaft and can corrode or fracture over time, feeding incorrect wheel-speed data to the sensor. Ignoring these signs can lead to more costly repairs and compromise driving safety. Early diagnosis is key to trouble-free motoring.

Common parts to replace on the BMW 3 Serie 325 D E93

For the BMW 3 Serie 325 D E93, we have identified several key components that regularly require replacement to maintain reliability. Our inventory reflects real-world demand and the technical requirements of this specific model. These are the categories where we offer comprehensive solutions:

  • Drive shafts for BMW 3 Serie 325 D E93 – Multiple options to cover both left and right sides along with varying technical specifications.
  • Propeller shafts for BMW 3 Serie 325 D E93 – A vital component for eliminating driveline vibrations.
  • ABS rings for BMW 3 Serie 325 D E93 – A cost-effective repair for the ABS system without replacing the complete shaft.

By focusing on these seven dedicated products, we ensure deep product knowledge and reliable availability. The drive shafts are particularly heavily loaded on the 325d model owing to the diesel engine's torque, and we recommend inspecting the condition of the drive shaft boots at every oil service. An intact CV joint boot is the most effective protection for your CV joints.

Finding the correct part for your BMW 3 Serie 325 D E93

Proceed to the relevant section for your BMW 3 Serie 325 D E93:

When dealing with potential driveline issues, it is best to navigate directly to the appropriate category. Comparing the exact component sections for the BMW 3 Serie 325 D E93 makes it simple to distinguish between drive shaft, CV joint or prop shaft problems, allowing you to select the page that matches your car's symptoms and fitment.

Identifying the exact replacement part for a BMW can be complex, as technical specifications often vary by model year, gearbox type and equipment level. To make finding parts as straightforward and dependable as possible, simply select your car's make, model and engine variant in our catalogue. Filtering by your exact BMW 3 Serie 325 D E93 ensures that only fully compatible components are shown, taking away the guesswork and preventing ordering errors.

When selecting parts, remember to verify technical details such as spline counts and total shaft length, which are clearly listed in our product specifications. If you are ever unsure, our technical team is ready to guide you. We understand your time is valuable, and our goal is to help you get the correct part on the first attempt. Supported by our fitment guarantee, you can order with absolute confidence, knowing your car parts will fit your vehicle accurately during installation.

Why buy from CVJoint24

CVJoint24 is not just another car parts outlet; we are the international shop of a Swedish driveline specialist, with our central warehouse located in Helsingborg, Sweden. Our focused niche expertise allows us to provide a level of product depth and accuracy that general motor factors struggle to match. For your BMW 3 Serie 325 D E93, this translates into parts selected specifically for their durability and precise fit. We understand the technical stresses of automotive drivetrains and constantly maintain our stock across the European Union with the most dependable parts.

Ordering from us gives you fast, efficient dispatch from our Swedish warehouse across the EU, minimising downtime for your car at the garage. We pair high manufacturing quality with competitive prices and customer support from people who truly know drivetrains. With our fitment guarantee and straightforward returns process, CVJoint24 is the trusted choice for the discerning BMW owner who expects the best for their vehicle. Always the right part, backed by specialist driveline expertise focused on your car's reliability.

Frequently Asked Questions about Drivetrain for BMW 3 Serie 325 D E93

What are the most common signs of a failing drive shaft on my BMW 325d E93?

The most common symptoms include clicking noises when cornering, vibrations under acceleration and, in some cases, a clunking noise from the rear of the vehicle. If a CV boot is split, grease leaking onto the wheel rim or underside of the car may also be visible.

Why should I choose a replacement ABS ring instead of changing the whole drive shaft?

Replacing just the ABS ring is a far more cost-effective solution if the drive shaft and its CV joints are otherwise in good condition. It resolves ABS and traction control fault codes at a fraction of the cost of a complete driveshaft assembly.

How do I ensure that the propeller shaft fits my BMW 3 Serie 325 D E93?

The most reliable method is to select your vehicle's exact make, model and engine variant in our search selector. Propeller shafts can vary depending on whether the car has a manual or automatic gearbox, and our database accounts for these technical differences.

Do you offer a fitment guarantee on drivetrain parts for BMW?

Yes, we always provide a fitment guarantee when you choose your parts using our vehicle selector. This ensures that the component is technically correct for your specific vehicle configuration.

How quickly can I receive my new drive shaft?

We dispatch weekday orders promptly. As a Swedish driveline specialist shipping directly from our own warehouse in Helsingborg, Sweden, we ensure rapid and dependable handling across the EU.

Is it difficult to replace an ABS ring on a BMW E93 yourself?

It requires a moderate level of mechanical experience, as the drive shaft must be detached from the wheel hub. The new ring is then pressed or heated into position after the mating surface has been thoroughly cleared of rust and dirt.