BMW 3 Serie 325 I E46

Car parts and drivetrain components for BMW 3 Serie 325 I E46. Confirm fitment by make, model and engine before ordering.

Products for BMW 3 Serie 325 I E46

20 products
1 - 20 of 20
Item no.:0323825
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:5196481
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:0209220
  • Diameter: 30 mm
  • Bearing thickness: 35 mm
  • Hole spacing c/c: 160 mm
Item no.:0211080
  • Total length: 1,397 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
Item no.:0346287
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 82 mm
  • Width: 12 mm
Item no.:6199340
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:628332
  • Total length: 1,585 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Item no.:621179
  • Position: Rear
  • Total length: 1,353 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:624531
  • Position: Rear
  • Total length: 1,560 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 77,8 mm
  • Outer diameter 2: 47 mm
Item no.:6596184
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 27
  • Outer diameter: 94 mm
  • ABS teeth: 48
Item no.:0421529
  • Position: Rear, Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:518271
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 672 mm
  • Diameter 2: 100 mm
  • ABS teeth: 48
Item no.:419364
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 608 mm
  • Joint diameter: 96 mm
  • ABS teeth: 48
Item no.:0932074
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:696651
  • Position: Rear
Item no.:693278
  • Position: Rear
Item no.:646268
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 27
  • Total length: 134,5 mm
  • Thread size: M24X1,5
Item no.:640481
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm

Drivetrain for BMW 3 Serie 325 I E46

The BMW 3 Serie 325 I E46 is an iconic model from the E46 generation, renowned for its silky-smooth six-cylinder M54 engine and beautifully balanced chassis. To ensure this driving experience remains intact, the drivetrain must be kept in prime condition. On a 325i, the drivetrain transfers power from the engine to the rear wheels with minimal loss and absolute precision. At CVJoint24, you will find the specific components required to service or repair the power transmission system on this very model. We understand the technical demands of a BMW, so we only supply parts that meet rigorous quality standards. By selecting the correct spare parts, you preserve not only the vehicle's performance but also its longevity and safety under demanding driving conditions. Maintaining the drivetrain is a sound investment in your car's future value and reliability.

How the drivetrain is engineered on the BMW 3 Serie 325 I E46

The layout of the drivetrain on a BMW 3 Serie 325 I E46 adheres to BMW's classic blueprint of rear-wheel drive and a longitudinal engine. Power travels from the gearbox via a giubo (flex disc) to a central propeller shaft for the BMW 3 Serie 325 I E46. This shaft is a two-piece design, supported by a centre bearing with a rubber mounting to dampen vibrations and accommodate movement. From the prop shaft, power reaches the rear differential, which then distributes torque to the road wheels through two drive shafts. Each drive shaft for the BMW 3 Serie 325 I E46 is equipped with inner and outer CV joints, allowing for suspension articulation whilst delivering constant power delivery. It is a refined setup where every link in the chain—from gearbox flange to wheel hub—must operate seamlessly to prevent noise and imbalance, which is especially noticeable in a well-insulated, premium car like the E46.

Common faults and symptoms

There are several distinct signs that drivetrain components on your BMW 3 Serie 325 I E46 are wearing out. One of the most typical symptoms is a vibration felt through the cabin or your seat during acceleration, often traced to an out-of-balance propeller shaft or an exhausted centre bearing. A rhythmic clicking sound when executing tight turns at low speed usually indicates that the outer CV joint on a driveshaft is failing, frequently caused by a split CV boot. Another common issue on the E46 is an illuminated ABS warning light or an ABS pulse through the pedal when braking on dry tarmac. This is typically caused by a corroded or cracked ABS ring on the BMW 3 Serie 325 I E46, which expands and fouls the sensor. Ignoring these symptoms can lead to far costlier secondary damage to the differential or wheel bearings.

Common parts to replace on the BMW 3 Serie 325 I E46

Based on our extensive data for the BMW 3 Serie 325 I E46, we have identified the most critical drivetrain components for this model. We stock a comprehensive range to meet every demand. Firstly, we offer multiple drive shaft options, as dimensions vary between the left- and right-hand side as well as gearbox types. Secondly, the propeller shaft is a key assembly, and we supply dedicated options to eliminate driveline vibration and unusual noises. Lastly, ABS rings are among our most sought-after E46 parts; we stock 2 types of reluctor rings that cure faulty ABS signals without the need to replace the entire drive shaft. By concentrating on these key components, we provide an all-inclusive solution for your car's driveline.

  • Drive shaft BMW 3 Serie 325 I E46
  • Propeller shaft BMW 3 Serie 325 I E46
  • ABS ring BMW 3 Serie 325 I E46

Finding the right part for your BMW 3 Serie 325 I E46

Navigate directly to the relevant category for the BMW 3 Serie 325 I E46:

When diagnosing driveline faults, it helps to begin in the right category straight away. Reviewing the dedicated component sections for the BMW 3 Serie 325 I E46 makes it straightforward to distinguish between drive shaft, CV joint or propeller shaft issues, allowing you to browse the page that matches your car's symptoms and specifications.

Finding the correct replacement part for a BMW 3 Serie 325 I E46 calls for accuracy, as specifications vary depending on whether the car has a manual or automatic gearbox, as well as the production year. The most reliable way to select the right part is to use our vehicle selector and filter by make, model and engine. This instantly brings up components that are technically verified for your exact vehicle. We also advise cross-referencing original part numbers (OE numbers) if available, particularly when ordering a prop shaft. Our aim is to ensure you choose the right part the first time and avoid unnecessary returns. If you are unsure which component fits your BMW 3 Serie, our customer support team is always on hand with technical expertise to guarantee a spot-on fit.

Why shop with CVJoint24

CVJoint24 is the international store of a Swedish driveline specialist, supplying high-quality drivetrain and power transmission parts across the EU from our warehouse in Helsingborg, Sweden. We have cultivated in-depth technical expertise and a wide range built around uncompromising quality and precise fitment. When you order from us, you get total peace of mind with our fitment guarantee and robust components built to withstand tough European driving conditions. We know how critical it is to get your vehicle back on the road promptly, which is why we maintain fast dispatch and dependable shipping throughout Europe. Our single-minded focus on drivelines means we can deliver expert technical advice that general car parts stores simply cannot match. With our support, maintaining your BMW 3 Serie 325 I E46 is straightforward and dependable—making us the natural choice for enthusiasts and professional garages alike.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Serie 325 I E46

How do I know if my BMW 325i E46 needs a new drive shaft?

The most common symptoms are clicking noises during sharp turns or vibrations under acceleration. If the CV boot is split and grease has leaked out, there is a high risk that the CV joint has suffered damage and the complete shaft needs inspecting.

Why is the ABS warning light on in my BMW E46?

A very common fault on the E46 is that the ABS ring on the drive shaft corrodes and splits. This alters the air gap to the sensor, triggering the warning light. We supply replacement ABS rings as a cost-effective repair solution.

Does the same propeller shaft fit all BMW 325i E46 models?

No, the length and mounting flanges of the propeller shaft vary depending on whether the car has a manual or automatic gearbox. Always select your vehicle's make, model and engine to find the correct version for your car.

What is the CVJoint24 fitment guarantee?

It means we guarantee the part will fit your BMW 3 Serie 325 I E46 when you select your correct make, model and engine variant, giving you complete peace of mind when ordering.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On many models you can replace just the joint, but it is often more time-efficient and cost-effective to replace the complete drive shaft, especially if multiple components show signs of wear.

How quickly will parts for my BMW be delivered?

We dispatch quickly from our central warehouse so you receive your parts promptly across the EU and can get your BMW 325i back on the road as soon as possible.