BMW 3 Serie 325 I E91

Spare parts and drivetrain components for BMW 3 Serie 325 I E91. Check vehicle fitment by make, model and engine before ordering.

Products for BMW 3 Serie 325 I E91

29 products
1 - 24 of 29
Item no.:4179864
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0211549
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0251500
  • Total length: 1,452 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Item no.:6184106
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:5108401
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:358887
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:5197179
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:6298386
  • Position: Rear
  • Total length: 1,525 mm
  • Number of joints: 1
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:627236
  • Position: Rear
  • Total length: 1,513 mm
Item no.:0599605
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 27
  • Outer diameter: 88 mm
  • ABS teeth: 48
Item no.:0469807
  • Position: Rear, Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:621072
  • Position: Rear
  • Total length: 1,425 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
Item no.:645227
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 30
  • Seal diameter: 58,7 mm
  • Total length: 131 mm
Item no.:645428
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:415065
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:654661
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0970233
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:692796
  • Position: Rear
Item no.:694339
  • Position: Rear
Item no.:0610062
  • Position: Rear
Item no.:642385
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Showing 1–24 of 29 products

Drivetrain for BMW 3 Serie 325 I E91

The BMW 3 Serie 325 I E91 is renowned for its balance and dynamic handling, placing high demands on every drivetrain component. As specialists in BMW, we know that the power transmission is the heart of your driving experience. The drivetrain in a 325i E91 must handle torque from the six-cylinder engine with precision to maintain that characteristic feel. We supply a carefully chosen range of parts technically tailored for this exact model version, ensuring durability and optimal operation under demanding conditions.

Our focus is to provide components that meet or exceed original equipment standards. For a BMW 3 Serie 325 I E91, this means offering dedicated solutions for both the rear axle assembly and the central driveline. Selecting the correct parts from the start reduces the risk of consequential damage to the differential and gearbox, saving time and money in the long run. Explore our selection to find the precise parts your car requires to perform at its best.

How the drivetrain is configured on the BMW 3 Serie 325 I E91

The drivetrain on a BMW 3 Serie 325 I E91 relies on BMW's classic layout featuring a longitudinally mounted engine delivering power to the rear wheels. Central to the system is a propeller shaft that transmits rotation from the gearbox to the rear differential. From the differential, power is routed to the wheels via two drive shafts. This layout is optimised for weight distribution and road holding, but it also exposes several moving parts, such as universal joints and CV joints, to constant mechanical stress and vibration during driving.

The E91 platform also uses sophisticated sensors to monitor wheel speed, in which the ABS ring plays a vital role. Mounted on the driveshaft, this ring delivers signals to the vehicle's safety systems. Because the 325i model features specific gear ratios and chassis settings, its mechanical drivetrain parts must be accurately calibrated. Every component, from the centre bearing on the prop shaft to the inner and outer CV joints, works in harmony to ensure smooth, efficient power delivery to the tarmac.

Common faults and symptoms

Several clear symptoms point to wear within the drivetrain of your BMW 3 Serie 325 I E91. One of the most frequent indicators is vibration felt through the bodyshell or seat, particularly under acceleration or at specific road speeds. This is often caused by an unbalanced propeller shaft or a worn centre bearing. If you notice a clicking noise when cornering or driving at low speeds, this typically signals that an outer CV joint on a drive shaft is failing, usually because a split CV boot has let in road dirt.

Another common issue on E91 models involves the ABS system. An illuminated ABS warning light or anti-lock activation during standard braking can stem from a corroded or cracked ABS ring. Exposed to road grit and moisture, the ring can swell, fouling the sensor or producing false readings. Overlooking these symptoms can cause more costly damage, including harm to the differential or complete driveline failure, making prompt action vital at the first sign of noise or play.

Common parts to replace on the BMW 3 Serie 325 I E91

To preserve the reliability of your BMW 3 Serie, certain components require regular inspection and maintenance. In our range for the 325 I E91, you will find the most requested parts to cure typical faults. We supply components tailored to this specific model, including an extensive selection of shafts and rings. Replacing worn items promptly keeps your car's road manners fully intact.

  • Drive shaft BMW 3 Serie 325 I E91 – We stock multiple variants to suit different model years and specifications, ensuring an exact fit at the differential.
  • Propeller shaft BMW 3 Serie 325 I E91 – With several options available, we provide the correct length and balancing to eliminate drivetrain vibration.
  • ABS ring BMW 3 Serie 325 I E91 – A crucial component to restore ABS and stability control function when corrosion sets in.

How to find the right part for your BMW 3 Serie 325 I E91

Proceed to the relevant section for your BMW 3 Serie 325 I E91:

On a vehicle with several possible driveline faults, it pays to navigate straight to the right category. Comparing the exact component sections for the BMW 3 Serie 325 I E91 makes it simple to distinguish between drive shaft, constant velocity joint or prop shaft issues, guiding you directly to the parts that match your symptoms and technical requirements.

Pinpointing the exact component for your BMW 3 Serie 325 I E91 can be tricky due to variations between production dates and equipment levels. The most reliable method is to select your car by its make, model and engine variant in our shop. Filtering by your exact vehicle displays only parts that are technically verified to fit, removing any guesswork and avoiding incorrect orders that could delay your repair.

Once you are in the correct category, such as drive shafts, also verify fitting details such as side of fitment (left or right) and whether your vehicle is fitted with a manual or automatic gearbox, as this can affect propeller shaft dimensions. Our technical details and customer support team are on hand to help you pick correctly the first time. With our fitment guarantee, you can order with absolute confidence that the parts will integrate smoothly with your car.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist with its central warehouse in Helsingborg, Sweden, delivering high-grade parts across the EU. We combine comprehensive technical know-how with an inventory tailored for discerning drivers. Ordering parts for your BMW 3 Serie 325 I E91 from us gives you not only reliable spare parts, but also the confidence that comes from dealing with driveline specialists who understand the mechanics of your car. By stocking our products in our own warehouse, we keep strict control over quality and order handling.

Our goal is always to deliver the right component at the right price, with no compromise on quality. Supported by our fitment guarantee and straightforward returns, ordering car parts online is completely hassle-free. Whether you are a professional garage or an experienced DIY mechanic, CVJoint24 is your trusted partner for drivetrain components and technical expertise for your BMW.

Frequently asked questions about drivetrain parts for BMW 3 Series 325i E91

What are the most common signs of a failing drive shaft on my BMW 325i E91?

The most common symptoms are clicking noises during sharp turns, vibrations under acceleration and grease leaking around the CV boots. If you notice any of these signs, you should inspect the drive shaft straight away.

Do all BMW 3 Series propeller shafts fit my 325i E91?

No, the propeller shaft is specific to the model, engine variant and gearbox type. Always select your BMW 3 Series 325i E91 by make, model and engine to find the exact prop shaft that fits your car.

Why has the ABS warning light come on in my BMW E91?

A very common fault on the E91 is that the ABS ring on the drive shaft corrodes and splits, preventing the sensor from reading the wheel speed correctly. This triggers the warning light and can affect braking performance.

Can I replace just the ABS ring, or do I have to replace the complete drive shaft?

On the BMW 325i E91, it is often possible to replace just the ABS ring if the rest of the drive shaft is in good condition, which is a significantly more cost-effective solution than replacing the entire shaft.

How do I know whether vibrations are coming from the propeller shaft or the drive shafts?

Vibrations from the propeller shaft are typically felt through the entire body shell and depend on road speed, whereas vibrations from drive shafts are usually felt more through the steering wheel or under hard acceleration, and can change with the steering angle.

Do you offer a fitment guarantee on parts for the BMW 3 Series 325i E91?

Yes, we always offer a fitment guarantee when you select your vehicle's make, model and engine, ensuring that the part you order is technically correct for your specific car model.