BMW 3 Serie 325 I E93

Welcome to your dedicated specialist in drivetrain components for the BMW 3 Serie 325 I E93. As an experienced Swedish driveline specialist delivering across Europe, we stock a focused...

Products for BMW 3 Serie 325 I E93

24 products
1 - 24 of 24
Item no.:0334674
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:4145129
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:0250128
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0282199
  • Total length: 1,452 mm
  • Number of joints: 2
  • Number of centre bearings: 1
Item no.:6106074
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:5157460
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:0531222
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 27
  • Outer diameter: 88 mm
  • ABS teeth: 48
Item no.:0492116
  • Position: Rear, Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:620987
  • Position: Rear
  • Total length: 1,425 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
Item no.:514324
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:641583
  • Position: Rear, Inner
  • Inner splines: 25
  • Splines gearbox side: 30
  • Seal diameter: 58,7 mm
  • Total length: 131 mm
Item no.:645140
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm
Item no.:410244
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:517881
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 689 mm
  • Joint diameter, gearbox side: 102 mm
  • Thread size: M27x1.5
Item no.:655406
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:0950553
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:697133
  • Position: Rear
Item no.:698523
  • Position: Rear
Item no.:0695899
  • Position: Rear
Item no.:644086
  • Position: Rear, Inner
  • Inner splines: 24
  • Total length: 24 mm
  • Joint diameter: 92 mm
  • Thread size: M24X1,5
Item no.:514471
  • Splines wheel side: 27
  • Total length: 667 mm
  • Joint diameter, gearbox side: 100 mm
  • Thread size: M24x1.5
Item no.:415378
  • Splines wheel side: 27
  • Total length: 611 mm
  • Joint diameter, gearbox side: 100 mm
  • Seal ring diameter: 69 mm

Drivetrain for BMW 3 Serie 325 I E93

The BMW 3 Serie 325 I E93 represents a unique combination of elegant convertible design and the classic straight-six engine for which BMW is renowned. Delivering that power cleanly from the engine down to the tarmac requires a drivetrain in peak condition. The E93 model places rigorous demands on its running gear, especially as the chassis is reinforced to compensate for the open-top structure, altering how vibrations and torque travel throughout the vehicle. With us, you will find a curated range of parts precision-tailored specifically to the 325i variant of this generation.

Maintaining the drivetrain on a BMW 3 Serie 325 I E93 is not merely about preventing roadside breakdowns; it preserves that dynamic driving experience. Worn parts quickly compromise the sharpness and poise built into the chassis by BMW engineers. We supply everything from complete drive shafts to smaller, critical items such as ABS rings, all selected to match the rigorous technical specifications of your car. Offering 13 matched components for this model, we cover virtually every demand for scheduled maintenance and running repairs.

How the drivetrain is structured on BMW 3 Serie 325 I E93

The drivetrain on a BMW 3 Serie 325 I E93 follows a traditional rear-wheel drive (RWD) layout, running torque from the longitudinal engine through the gearbox into a central propeller shaft. This prop shaft is split into sections and supported by a centre bearing that eliminates drivetrain vibrations. From the rear differential, torque travels outwards to the rear hubs via two drive shafts. Each driveshaft is equipped with an inner and an outer CV joint to accommodate suspension movement while delivering power smoothly at changing angles.

What distinguishes the E93 platform is its delicate balance between ride comfort and athletic response. Because the 325i generates smooth, linear torque, its constant velocity joints undergo steady, controlled loads. The assembly also integrates critical sensors, where the ABS ring plays an essential role in providing accurate telemetry to the traction control and anti-lock braking systems. Understanding this mechanical chain helps you pinpoint issues accurately and pick the correct replacement parts to restore original performance.

Common faults and symptoms

One of the earliest signs of drivetrain trouble on a BMW 3 Serie 325 I E93 is vibration through the body shell or the driver's seat when accelerating. This is frequently traced to a deteriorated centre bearing or prop shaft imbalance. If vibrations arise strictly under load and clear as soon as you ease off the throttle, play in an inner CV joint is typically the cause. In a convertible like the E93, these shuddering sensations are felt even more acutely because the roof structure influences the car's acoustic resonance.

Another classic warning sign is a rhythmic clicking sound while cornering at low speeds, which almost invariably points to a worn outer CV joint. Should the ABS warning light illuminate or the traction control intervene unexpectedly, a cracked or corroded ABS ring is usually corrupting wheel speed signals to the ECU. Addressing these preliminary indicators promptly helps you prevent far more costly collateral damage to your differential or gearbox.

Common replacement parts for BMW 3 Serie 325 I E93

When running repairs or preventative servicing are due, certain parts wear faster than others. On the BMW 3 Serie 325 I E93, the rear drive shafts shoulder the heaviest mechanical strain. We stock a comprehensive range of car parts configured specifically for your car's drivetrain. Here are the core categories for your vehicle:

  • Drive shaft BMW 3 Serie 325 I E93 - Complete shafts for straightforward fitting.
  • Outer CV joint BMW 3 Serie 325 I E93 - Eliminates clicking noises when cornering.
  • Inner CV joint BMW 3 Serie 325 I E93 - Resolves vibration during acceleration.
  • Propeller shaft BMW 3 Serie 325 I E93 - Central power delivery for rear-wheel drive.
  • Centre bearing BMW 3 Serie 325 I E93 - Stabilises the prop shaft and suppresses resonance.
  • ABS ring BMW 3 Serie 325 I E93 - Delivers clear, reliable wheel-speed data to the braking system.

By picking the appropriate category, you can swiftly find the right stock for your vehicle. Every item is verified against technical tolerances to ensure an accurate fit on the BMW E93 chassis.

How to find the right part for BMW 3 Serie 325 I E93

Browse directly to the relevant sub-category for your BMW 3 Serie 325 I E93:

Whenever dealing with running gear issues, it pays to begin in the right product section. Comparing parts tailored to the BMW 3 Serie 325 I E93 makes it easy to differentiate between drive shaft, CV joint or propeller shaft faults and pick the component that resolves your symptoms with absolute fitment accuracy.

Locating the right spare parts for a BMW can occasionally be tricky, as technical specifications often differ depending on production month, transmission type (manual or automatic) and factory equipment. To guarantee you obtain parts that fit your BMW 3 Serie 325 I E93 seamlessly, simply select your exact make, model and engine from our vehicle selector. This filters for parts that match your specification, eliminating doubt and simplifying work in the garage.

Once you are in the correct category, such as drive shafts or prop shaft components, remember to verify whether you need a left- or right-hand assembly, and note any aftermarket modifications that might impact fitment. Our catalogue is structured to return accurate matches, and our fitment guarantee lets you order with complete confidence. Should you have any doubts about which component is causing your issues, you can always rely on our expert team of driveline specialists for advice.

Why shop with CVJoint24

CVJoint24 is not merely an everyday parts reseller; we are the international shop of a Swedish driveline specialist operating from our warehouse in Helsingborg, Sweden, dedicated exclusively to driveline and power transfer components. For BMW 3 Serie 325 I E93 owners, this provides access to in-depth technical knowledge and an inventory that generalist shops rarely stock. We understand the engineering behind your vehicle and offer parts engineered to withstand BMW's high standards for durability and performance.

When purchasing from us, finding the correct component is simple by selecting your car's make, model and engine. We dispatch stocked items quickly across the EU to minimise off-road time for your vehicle. Backed by our fitment guarantee, online shopping is completely stress-free – when we confirm a part fits your BMW 3 Serie 325 I E93, you can be sure it will fit. Choose a focused driveline specialist and enjoy reliable quality with every order.

Frequently asked questions about BMW 3 Series 325 I E93

How do I know whether it is the drive shaft or the propeller shaft vibrating on my BMW E93?

Vibrations from the propeller shaft are often felt throughout the entire bodyshell and are speed-dependent, whereas vibrations from an inner CV joint on the drive shaft typically occur under heavy acceleration and are felt more locally at the rear of the car.

Does the same drive shaft fit both manual and automatic BMW 325i E93 models?

This can vary. The length and mountings of the drive shafts can differ depending on the gearbox. Always select your vehicle's exact make, model and engine variant in our search tool to ensure you get the correct part for your specific configuration.

Why is there a clicking noise when I turn in my BMW 3 Series 325 I E93?

A clicking noise when cornering is a classic symptom of a worn outer CV joint. This is often caused by a split CV boot that has allowed dirt to enter and grease to escape.

Can I replace just the ABS ring, or do I have to replace the entire drive shaft?

On many BMW models, including the 3 Series E93, you can easily replace just the ABS ring if the old one has cracked or corroded, which is a far more economical solution than replacing the complete shaft.

What are the symptoms of a worn centre bearing on the propeller shaft?

A failing centre bearing typically produces a whining or grinding noise, along with vibrations felt through the centre console or floorpan, particularly at specific engine speeds or road speeds.

What does your fitment guarantee mean for my BMW?

Our fitment guarantee means that when you select your vehicle by make, model and engine and purchase a recommended part, we guarantee it will fit your car. In the unlikely event that it does not fit, we will help you find the correct part at no extra cost.