BMW 3 Serie 325 I Xdrive E91

Spare parts and drivetrain components for the BMW 3 Serie 325 I Xdrive E91. Select your make, model and engine to confirm correct fitment before ordering.

Products for BMW 3 Serie 325 I Xdrive E91

29 products
1 - 24 of 29
Item no.:1187046
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 571 mm
  • ABS teeth: 48
Item no.:2185389
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 892 mm
  • ABS teeth: 48
Item no.:0213043
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0218719
  • Position: Front
  • Total length: 738 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:240238
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 500 mm
  • Outer splines: 27
Item no.:353584
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:627238
  • Position: Rear
  • Total length: 1,256 mm
Item no.:7302489
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 890 mm
  • ABS teeth: 49
Item no.:413219
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:629559
  • Position: Rear
  • Total length: 1,235 mm
  • Number of joints: 1
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:1119226
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 564 mm
  • ABS teeth: 48
Item no.:519737
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:140684
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 43,95 mm
  • Total length: 180 mm
  • Outer splines: 27
Item no.:247641
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 502 mm
  • Outer splines: 27
Item no.:3560165
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:0628377
  • Position: Rear
  • Total length: 124 mm
Item no.:0983164
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:0627805
  • Total length: 110 mm
Item no.:0954690
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:694960
  • Position: Rear
Item no.:397550
  • Position: Front
Showing 1–24 of 29 products

Drivetrain for BMW 3 Serie 325 I Xdrive E91

Maintaining the drivetrain on a BMW 3 Serie 325 I Xdrive E91 requires both technical insight and the correct parts. As a specialist in the drivetrain, we understand the distinct demands that the xDrive system places on the vehicle's mechanical assemblies. The E91 generation of the 3 Series is renowned for its engaging handling, but four-wheel drive also means more components must work in unison to distribute torque between the front and rear axles. This demands that every link in the chain, from the gearbox to the wheel hub, functions impeccably. We supply components that meet or exceed original equipment specifications, ensuring your BMW retains its characteristic road stability and efficient power delivery across all driving conditions.

How the drivetrain works on the BMW 3 Serie 325 I Xdrive E91

The drivetrain on a BMW 3 Serie 325 I Xdrive E91 is an intricate system where engine power passes through the gearbox into a transfer box. From the transfer box, torque is channelled through propeller shafts to both the front and rear differentials. On this specific model, the xDrive setup is engineered with a rear bias but can route torque to the front wheels in fractions of a second when required. This architecture features a front propeller shaft and a rear propeller shaft, alongside drive shafts at all four corners. This added complexity distributes wear differently than in rear-wheel-drive editions. Every component on your BMW must remain in precise balance to prevent premature wear on the transfer box, which is one of the most critical assemblies in the whole system.

Common faults and symptoms

When driveline components begin to fail on a BMW 3 Serie 325 I Xdrive E91, distinct symptoms usually follow. One of the most typical signs is vibration felt through the floorpan or cabin during acceleration, often traced back to imbalance or wear in a prop shaft. A clicking noise during tight manoeuvres or full-lock turns usually points to a worn outer CV joint on a front drive shaft. For xDrive owners, it is equally important to watch out for shuddering under load or unusual noises from the centre tunnel, which can indicate issues with the transfer box or the joints on the propeller shafts. Because the system is mechanically linked, neglect in one area can quickly cause secondary damage to other driveline parts.

Common parts to replace on the BMW 3 Serie 325 I Xdrive E91

For this specific model, certain driveline parts experience high demand. Our range for the BMW 3 Serie 325 I Xdrive E91 includes a variety of drive shafts and propeller shaft configurations. The front driveshafts are particularly susceptible to wear due to the joint angles introduced by steering motion. The prop shaft, especially the front unit running between the transfer box and the front differential, is another frequent wear item that often requires replacement to resolve driveline vibration. Choosing the correct BMW 3 Serie parts from us guarantees exact engineering tolerances, which are vital for ensuring that the electronic sensors and mechanical parts of the xDrive system work smoothly without throwing fault codes or enduring undue strain.

How to find the correct parts for your BMW 3 Serie 325 I Xdrive E91

Browse directly to the relevant subcategory for your BMW 3 Serie 325 I Xdrive E91:

When diagnosing driveline problems on an all-wheel-drive car, navigating directly to the correct category saves valuable time. By comparing the dedicated product ranges for the BMW 3 Serie 325 I Xdrive E91, you can accurately distinguish between issues in a drive shaft, CV joint or propeller shaft and proceed to the exact section for your vehicle.

Finding the right spare parts for an advanced vehicle like the BMW 3 Serie 325 I Xdrive E91 is straightforward when you select your vehicle's exact make, model and engine variant in our store. Because specifications can vary depending on production month and optional equipment, our vehicle filter narrows down the components that offer guaranteed compatibility with your car. We always recommend confirming whether the front or rear axle requires attention before placing your order. Here are the core categories for your car:

  • Drive shafts for BMW 3 Serie 325 I Xdrive E91
  • Propeller shafts for BMW 3 Serie 325 I Xdrive E91
Following these links takes you straight to the tailored product range for your specific model variant.

Why shop with CVJoint24

CVJoint24 is your dedicated partner for vehicle driveline and power transmission components. We are an international shop backed by a Swedish driveline specialist, with our central warehouse in Helsingborg, Sweden, delivering premium quality and technical expertise throughout the EU. When sourcing parts for your BMW 3 Serie 325 I Xdrive E91 from us, you get high-grade components alongside the reassurance of our accurate fitment guarantee. Our aim is to make finding and fitting the correct replacement simple, keeping downtime to a minimum so your car is back on the road without delay. With extensive stock and dedicated focus, we are the dependable choice for discerning BMW drivers who expect the best from their car parts.

Frequently Asked Questions about Drivetrain for BMW 3 Serie 325 I Xdrive E91

What are the most common signs that a drive shaft is failing on my BMW E91 xDrive?

The most common symptoms are clicking noises on full steering lock or vibrations under acceleration. On xDrive models, subtle vibrations through the steering wheel can also indicate wear on the front drive shafts.

Do the propeller shafts fit both manual and automatic gearboxes?

The length of the propeller shaft can vary depending on the gearbox type. Always use our search tool by selecting your vehicle's make, model and engine to ensure you get the correct prop shaft for your specific configuration.

How many drive shafts does a BMW 325i xDrive have?

Because it is a four-wheel-drive model, it has a total of four drive shafts – two at the front and two at the rear – transferring power from the differentials to the wheels.

What does your fitment guarantee mean for BMW parts?

Our fitment guarantee means that once you have selected your correct vehicle details and we have confirmed the part, we guarantee that it will physically fit your car. This gives you complete peace of mind when ordering.

Why is the xDrive system sensitive to imbalance in the propeller shaft?

xDrive uses a transfer box with a multi-plate clutch. Vibrations from a worn prop shaft can travel straight into the transfer box, causing costly wear to bearings and clutches.

How quickly can I have my parts delivered?

We aim for fast dispatch on all in-stock items, helping you fix the faults on your BMW 3 Serie 325 I Xdrive E91 as quickly as possible.