BMW 3 Serie 325 I Xdrive E92

Spare parts and drivetrain components for the BMW 3 Serie 325 I Xdrive E92. Select your make, model and engine to ensure an accurate fit before ordering.

Products for BMW 3 Serie 325 I Xdrive E92

30 products
1 - 24 of 30
Item no.:0352452
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:1105138
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 571 mm
  • ABS teeth: 48
Item no.:4120228
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2110194
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 892 mm
  • ABS teeth: 48
Item no.:0222069
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0275697
  • Position: Front
  • Total length: 738 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:246623
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 500 mm
  • Outer splines: 27
Item no.:356500
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:629811
  • Position: Rear
  • Total length: 1,256 mm
Item no.:7302491
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 890 mm
  • ABS teeth: 49
Item no.:626165
  • Position: Rear
  • Total length: 1,235 mm
  • Number of joints: 1
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:1127801
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 564 mm
  • ABS teeth: 48
Item no.:515530
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:140633
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 43,95 mm
  • Total length: 180 mm
  • Outer splines: 27
Item no.:240941
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 502 mm
  • Outer splines: 27
Item no.:3562296
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:413706
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:0623799
  • Position: Rear
  • Total length: 124 mm
Item no.:0942526
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:0682629
  • Total length: 110 mm
Item no.:0928664
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:695306
  • Position: Rear
Showing 1–24 of 30 products

Drivetrain for BMW 3 Serie 325 I Xdrive E92

The BMW 3 Serie 325 I Xdrive E92 is a technically sophisticated machine in which the xDrive system plays a key role in handling and road safety. The drivetrain in this model is engineered to manage the output of the six-cylinder engine, distributing it effectively between the front and rear axles. As a specialist in drivetrain components, we understand the exacting demands placed on parts in an all-wheel-drive E92. It is not merely about transferring torque, but doing so with precision and minimal friction to preserve that signature sporty feel. Every component in the system, from the smallest ABS ring to the longest propeller shaft, must operate in complete harmony. We supply parts specifically tailored to the 325i xDrive, ensuring your car remains dependable across all driving conditions, from snowy winter roads to dry tarmac.

How the drivetrain is configured on the BMW 3 Serie 325 I Xdrive E92

The drivetrain layout on the BMW 3 Serie 325 I Xdrive E92 is complex, relying on several critical components working together to deliver optimum traction. Power leaves the gearbox and enters a transfer box, which directs drive onwards via a BMW 3 Serie 325 I Xdrive E92 propeller shaft to both the front and rear axles. Unlike purely rear-wheel-drive versions of the E92 coupé, this model features drive shafts at both the front and rear. The front drive shafts must cope with substantial steering angles and sharp acceleration simultaneously, placing demanding requirements on CV joint quality and lubrication. The rear axle focuses purely on transferring power, yet still relies on precise prop shaft balancing to eliminate chassis vibrations. The entire system is monitored by wheel speed sensors, where a BMW 3 Serie 325 I Xdrive E92 ABS ring supplies vital rotational data to the vehicle stability systems.

Common faults and symptoms

Identifying drivetrain issues early can save substantial repair bills and prevent sudden breakdowns. On the BMW 3 Serie 325 I Xdrive E92, vibration is one of the most frequent indicators of driveline trouble. If vibrations occur at specific speeds or under hard acceleration, an imbalanced propeller shaft or worn centre bearing may be to blame. Another typical symptom is a clicking or knocking sound on full steering lock at low speeds, which usually points to a worn outer CV joint on one of the front drive shafts. Jerky progress during acceleration, or an all-wheel-drive system failing to engage smoothly, can stem from false signals caused by a corroded or cracked ABS ring. Because the xDrive system is exceptionally sensitive to rotational speed differences, keeping every mechanical component in top condition is essential to prevent costly premature wear on the transfer box.

Common replacement parts for the BMW 3 Serie 325 I Xdrive E92

Based on our extensive technical data for the BMW 3 Serie 325 I Xdrive E92, several components require replacement over time due to normal wear and exposure to road salt and grit. We currently list items for this exact model variant to cover your repair requirements. Here are the most frequently requested categories for your vehicle:

  • Drive shafts for BMW 3 Serie 325 I Xdrive E92 (available variants for front and rear)
  • Propeller shafts for BMW 3 Serie 325 I Xdrive E92 (available variants for optimal power delivery)
  • ABS rings for BMW 3 Serie 325 I Xdrive E92 (1 specific variant for accurate sensor readings)

These parts are carefully selected to meet the high standards of fitment and material durability BMW drivers expect. Replacing a worn driveshaft promptly prevents consequential damage to wheel bearings and stops unwanted vibrations spreading through the driveline. Our propeller shafts are fully balanced and ready to install, saving valuable workshop time.

How to find the correct part for your BMW 3 Serie 325 I Xdrive E92

Go directly to the right category for the BMW 3 Serie 325 I Xdrive E92:

When troubleshooting a car with multiple potential driveline issues, starting in the precise category saves time. Comparing the specific subcategories for the BMW 3 Serie 325 I Xdrive E92 makes it easier to tell whether a fault lies in a drive shaft, CV joint or propeller shaft, taking you straight to the page that matches your symptoms and fitment.

Finding the right spare part for a specific BMW like the 325i xDrive E92 requires absolute precision. Because xDrive models utilise distinct components compared with rear-wheel-drive 3 Series variants, relying solely on model name or production year is not enough. The most dependable method is selecting your car by make, model and engine variant in our catalogue. This automatically filters out unsuitable parts, presenting only those engineered for your exact chassis setup. We have organised our range clearly so you can easily browse our 4 drive shafts and 4 propeller shafts. If you are ever unsure about fitting positions or left-versus-right compatibility, our technical team is on hand to assist. We ensure you order the right part the first time, avoiding delays in the garage.

Why shop with CVJoint24

CVJoint24 is your dedicated specialist for all automotive driveline and power transmission components. When purchasing parts for your BMW 3 Serie 325 I Xdrive E92 from us, you benefit from in-depth technical expertise and a targeted inventory that general motor factors rarely match. We understand the nuances of BMW all-wheel drive, offering only components proven to withstand demanding driving conditions. As a Swedish driveline specialist shipping across the EU from our central warehouse, we combine dependable quality with fast dispatch to minimise garage downtime. Count on CVJoint24 when you want expertise, correct fitment and premium car parts for your BMW.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Series 325 i xDrive E92

How do I know if my BMW 325i xDrive E92 needs a new drive shaft?

The most common signs are clicking noises when cornering or vibrations under acceleration. If the CV boot is split and grease has leaked out, there is a high risk that the CV joint is damaged and the entire shaft requires inspection.

Do drive shafts from a rear-wheel-drive E92 fit my xDrive?

No, xDrive models use unique drive shafts—especially at the front—designed specifically for the four-wheel-drive setup. Always select your exact make, model and engine to ensure the correct fitment.

Why does my BMW 3 Series 325 i xDrive E92 vibrate at motorway speeds?

Vibrations at higher speeds are frequently caused by an unbalanced propeller shaft or a worn centre bearing. We offer 4 different propeller shafts to resolve precisely these issues on your E92.

What happens if the ABS ring on my BMW breaks?

A broken ABS ring sends incorrect signals to the car's ECU, which can trigger the ABS warning light and compromise both braking performance and all-wheel-drive operation. It is a vital component for safety.

Do you offer a fitment guarantee on drivetrain parts for BMW?

Yes, we provide a strict fitment guarantee. When you select your BMW 3 Series 325 i xDrive E92 make, model and engine variant, we guarantee that the parts displayed will fit your car.

How quickly can I have my new propeller shaft delivered?

We offer fast dispatch on all our stocked products, helping you get your BMW back on the road without unnecessary delay.