BMW 3 Serie 325 XI E46

Spare parts and drivetrain components for the BMW 3 Serie 325 XI E46. Confirm fitment using your make, model and engine before ordering.

Products for BMW 3 Serie 325 XI E46

26 products
1 - 24 of 26
Item no.:0353767
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:1141223
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 580 mm
  • ABS teeth: 48
Item no.:4106229
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 613 mm
  • Joint diameter: 83 mm
  • ABS teeth: 48
Item no.:2171998
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 902 mm
  • ABS teeth: 48
Item no.:5176233
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 668 mm
  • Joint diameter: 88 mm
  • ABS teeth: 48
Item no.:4147130
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 670 mm
  • Joint diameter: 83 mm
  • ABS teeth: 48
Item no.:0299108
  • Total length: 1,225 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 14 mm
Item no.:6104114
  • Position: Rear
  • Splines wheel side: 27
  • Total length: 614 mm
  • Joint diameter: 94 mm
  • ABS teeth: 48
Item no.:356540
  • Position: Outer
  • Inner splines: 27
  • Splines wheel side: 30
  • Seal diameter: 59 mm
  • Outer diameter: 98 mm
Item no.:323386
  • Position: Front
  • Total length: 723 mm
Item no.:0280716
  • Total length: 718 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 47 mm
Item no.:3542167
  • Position: Outer
  • Inner splines: 27
  • Splines wheel side: 30
  • Outer diameter: 98 mm
Item no.:517676
  • Position: Rear right
  • Splines wheel side: 27
  • Total length: 672 mm
  • Diameter 2: 100 mm
  • ABS teeth: 48
Item no.:419495
  • Position: Rear left
  • Splines wheel side: 27
  • Total length: 608 mm
  • Joint diameter: 96 mm
  • ABS teeth: 48
Item no.:354895
  • Position: Front, Outer
  • Inner splines: 27
  • Splines wheel side: 30
  • Seal diameter: 59 mm
  • Thread size: M27X1,5
Item no.:0911301
  • Total length: 62 mm
  • Diameter: 24 mm
Item no.:391975
  • Position: Front
Item no.:0939270
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:0993595
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:0697657
  • Total length: 86 mm
Item no.:695575
  • Position: Rear
Item no.:692712
  • Position: Rear
Showing 1–24 of 26 products

Drivetrain for BMW 3 Serie 325 XI E46

The BMW 3 Serie 325 XI E46 represents a unique era of German engineering, combining classic driving pleasure with the stability of all-wheel drive. The drivetrain in this specific model is more complex than that of its rear-wheel-drive siblings, placing higher demands on precision when selecting spare parts. As specialists in driveline components, we understand the technical nuances required to keep a 325 XI in peak condition. The power transmission must manage the torque from the straight-six engine and distribute it efficiently to all four wheels, meaning every part from the gearbox to the wheel hub plays a critical role. We have gathered a dedicated range for this model to ensure you receive parts that match the original specifications perfectly.

Owning an all-wheel-drive E46 means enjoying fantastic traction, but it also involves more moving parts that are subject to wear over time. Our focus is on offering components that not only fit physically, but also withstand the stresses imposed by the intelligent four-wheel-drive system. Whether you need to resolve an unusual noise or carry out preventive maintenance, our aim is to be your natural partner for everything related to the power transfer on your BMW 3 Serie.

How the drivetrain is engineered on the BMW 3 Serie 325 XI E46

The layout of the drivetrain on a BMW 3 Serie 325 XI E46 differs significantly from the standard models. The system relies on a central transfer box sending power both rearwards and forwards. The rear section resembles the traditional BMW layout with a propeller shaft leading to a rear differential, whilst the front section requires an additional prop shaft running forward to a front differential integrated near the engine sump. From this front differential, drive shafts extend out to the front wheels—a configuration requiring specific components unique to the XI models.

This design means there are more universal joints, centre bearings and CV joints that must work together seamlessly. Each part in the assembly is calibrated to handle specific working angles and rotational speeds. To preserve the smooth, vibration-free ride for which BMW is renowned, replacement parts must be of exceptionally high quality. At CVJoint24, we have in-depth knowledge of how these components interact and supply only parts we know perform optimally with the E46 all-wheel-drive platform. Understanding this setup allows us to help you find the exact component required for your BMW.

Common faults and symptoms

When the drivetrain on a BMW 3 Serie 325 XI E46 begins to fail, it usually displays clear symptoms. One of the most frequent signs of wear in the front drive shafts is a clicking sound on full steering lock, indicating that an outer CV joint is failing. Vibrations under acceleration, on the other hand, are often caused by worn inner constant velocity joints or propeller shaft issues. Because the XI model features an extra prop shaft driving the front, there are more potential sources of imbalance that can transfer into the cabin, felt as a low humming drone or shuddering through the seats and steering wheel.

Another common issue on the E46 generation is corrosion on the ABS rings. When these rings rust or crack, they send erratic wheel-speed signals to the vehicle safety modules, causing the ABS warning light to illuminate or triggering unwanted ABS intervention under normal braking. It is also essential to inspect the drive shaft boots regularly; a split CV boot allows the lubricating grease to escape whilst letting in road grime, rapidly ruining the joint. Catching these warning signs early prevents costly secondary damage and keeps your car safe on the road.

Common parts to replace on the BMW 3 Serie 325 XI E46

To help you maintain your vehicle, we have organised the most frequently requested parts for your model. Here are the main product categories tailored to your car:

  • Drive shaft BMW 3 Serie 325 XI E46 – We supply both front and rear drive shafts engineered to meet the demands of all-wheel drive.
  • Propeller shaft BMW 3 Serie 325 XI E46 – Complete shafts and components to eliminate driveline vibrations.
  • ABS ring BMW 3 Serie 325 XI E46 – Precision-manufactured reluctor rings to restore full braking and stability control functionality.

Beyond these primary categories, inspecting adjacent components is always recommended. When replacing a driveshaft, you should always check the condition of the wheel bearings and suspension bushes. For the propeller shaft, the centre bearing and the rubber coupling (doughnut) are critical wear items that often require renewal at the same time as the shaft itself. By choosing the right parts from our catalogue, you can be sure of getting components thoroughly tested to satisfy the rigorous demands of a BMW 325 XI, saving you both time and money in the long run.

How to find the right part for your BMW 3 Serie 325 XI E46

Navigate directly to the relevant category for your BMW 3 Serie 325 XI E46:

On a vehicle with several possible driveline faults, starting in the right category saves time. By comparing the exact component sections for the BMW 3 Serie 325 XI E46, it is easier to isolate issues between a drive shaft, CV joint or propeller shaft and proceed to the page that best matches your symptoms and fitment needs.

Finding the correct replacement part for a BMW 3 Serie 325 XI E46 can sometimes be tricky due to technical variations between production years and chassis configurations. The most reliable way to identify the proper component is by selecting your car's make, model and engine variant in our store selector. This filters our range to the components specifically engineered for your vehicle. This accuracy is vital for XI models, as many parts look identical to rear-wheel-drive versions but have completely different lengths and dimensions.

Once you view the matching results, we also suggest checking the product details closely. We list technical specifications such as overall length, spline tooth counts on ABS rings, and mounting positions (front/rear, left/right) so you can cross-reference against the part on your car. Should you have any questions, our customer support team is on hand to assist you. Our goal is to help you get the right part first time and avoid unnecessary returns. With our driveline expertise, ordering the correct component is straightforward, fast and reliable.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, backed by our central warehouse in Helsingborg, Sweden, and a genuine passion for vehicle power transmission. When sourcing parts for your BMW 3 Serie 325 XI E46 from us, you benefit from a specialist catalogue built around exceptional depth and proven quality. We know how crucial it is to get your car back on the road quickly, which is why we dispatch promptly to drivers and workshops across the European Union.

We provide a reliable fitment guarantee across our catalogue, giving you complete peace of mind that the parts you order will fit and function properly. By focusing dedicatedly on drivetrain components, we have developed technical expertise that general parts suppliers simply cannot match. Whether you are a keen DIY mechanic or a professional garage, you will always find the right part at a fair price. Choose CVJoint24 for your BMW—your trusted partner for a smooth, dependable drivetrain throughout the life of your car.

Frequently asked questions about drivetrain parts for BMW 3 Serie 325 XI E46

How do I know if my BMW 3 Serie 325 XI E46 needs a new drive shaft?

The most common signs are clicking noises when cornering sharply (outer CV joint) or vibrations through the car during acceleration (inner CV joint). Also check whether the CV boots are split, as this quickly leads to drive shaft failure.

Why is the propeller shaft important on an XI model?

On a four-wheel-drive BMW such as the 325 XI, propeller shafts transfer power to both the front and rear axles. If these are out of balance or have worn universal joints, vibrations occur that can damage both the gearbox and differentials.

What causes ABS problems on an E46?

Often it is caused by the ABS ring on the drive shaft corroding or cracking. This sends incorrect signals to the sensor, which triggers the warning light. We supply replacement ABS rings that solve the issue without having to replace the entire drive shaft.

Do parts from rear-wheel-drive E46 models fit a 325 XI?

No, most drivetrain components such as drive shafts and propeller shafts are unique to the XI models due to the all-wheel-drive layout. Always select your make, model and engine to ensure the correct fit.

How does your fitment guarantee work?

Our fitment guarantee means that if you use our search tool to choose your car's make, model and engine and order the recommended part, we guarantee it will fit your vehicle. This gives you complete peace of mind when ordering.

How quickly are parts delivered for my BMW?

We aim to dispatch all orders for in-stock parts promptly from our central warehouse. We know you want to get your BMW 3 Serie 325 XI E46 back on the road as quickly as possible.