BMW 3 Serie 330 D

Welcome to CVJoint24, your Swedish driveline specialist for the BMW 3 Serie 330 D. This high-torque diesel model demands exceptional strength from its transmission components, and we...

Products for BMW 3 Serie 330 D

4 products
1 - 4 of 4
Item no.:457173
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 135 mm
Item no.:0435714
  • Position: Rear, Inner
  • Inner splines: 28
  • Splines gearbox side: 28
  • Joint diameter: 108 mm
Item no.:0888054
  • Inner diameter: 35 mm
  • Bearing thickness: 14 mm
  • Hole spacing c/c: 160 mm

Drivetrain for BMW 3 Serie 330 D

The BMW 3 Serie 330 D is renowned for its muscular six-cylinder diesel engine, which delivers impressive torque. This naturally places substantial demands on the car's drivetrain and power transmission. To preserve the driving enjoyment and stability expected of a BMW 3 Serie, it is vital that every drivetrain component functions impeccably. The drivetrain is the system that transfers engine power to the road wheels, and in a performance model like the 330 D, these parts face severe stresses under hard acceleration. Here at CVJoint24, we understand the specific engineering requirements of this model and supply a carefully curated range of car parts that meet or exceed original equipment specifications.

Maintaining the drivetrain on your BMW 3 Serie 330 D is not merely about preventing breakdowns, but also about safeguarding the car's distinctive handling dynamics. Worn components can cause power loss, unpleasant vibrations and, in worst-case scenarios, leave you stranded. By choosing the right components from a specialist, you ensure power reaches the tarmac efficiently and reliably. Our focus is on supplying parts with an exact fit, which is paramount for BMW owners who insist on precision and build quality throughout their vehicle.

How the drivetrain is engineered on the BMW 3 Serie 330 D

The drivetrain of the BMW 3 Serie 330 D is a sophisticated layout typically featuring a longitudinally mounted engine driving the rear wheels, or equipped with the intelligent xDrive all-wheel-drive system. Torque travels from the engine through the gearbox to a propeller shaft, which in turn delivers power to the rear differential (as well as to the front axle on xDrive models). Central to this design are the drive shafts, which use inner and outer CV joints to allow the suspension to articulate and the wheels to steer while maintaining a continuous rotational drive. Given the high torque output of the 330 D engine, these constant velocity joints are robustly dimensioned to withstand massive torsional forces without compromising refinement.

Another vital element of the driveline setup is the prop shaft mounting, where propeller shaft centre bearings play an essential role. These centre bearings support the prop shaft and absorb harmonics that would otherwise resonate into the vehicle body. On the BMW 3 Serie 330 D, the build precision of these parts is crucial for eliminating driveline imbalances, particularly at motorway speeds. The complete assembly is a masterclass in balancing strength with articulation, where every single link must remain in peak condition to deliver the seamless power delivery BMW is famous for. Understanding how this system works helps you identify early signs of drivetrain wear.

Common faults and symptoms

Several clear symptoms suggest the drivetrain on your BMW 3 Serie 330 D is wearing out. One of the most frequent signs of a failing outer CV joint is a rhythmic clicking or knocking sound heard when taking tight turns at low speeds. This is often triggered by a split CV boot, which allows road grime in and grease to escape, resulting in rapid wear to the joint's internal ball bearings and tracks. If, on the other hand, you experience shuddering or vibrations through the chassis during acceleration, it often points to a worn inner CV joint or excessive play in a drive shaft.

Vibrations occurring at specific road speeds or felt directly through the cabin floor are frequently caused by a failing prop shaft centre bearing. If the rubber surrounding the centre bearing perishes or tears, it can no longer dampen driveline movement, generating rotational imbalance. It is vital to take prompt action when these symptoms appear. Overlooking minor vibrations or knocking noises can quickly inflict secondary damage on costlier drivetrain units, such as the gearbox or differential. By staying alert to changes in your BMW 3 Serie 330 D, you can save significant time and money by renewing worn spare parts before they lead to catastrophic failure.

Typical replacement parts for the BMW 3 Serie 330 D

On the BMW 3 Serie 330 D, specific driveline components are naturally subjected to more wear and tear due to the car's substantial torque. In our dedicated range for this model, you will find items such as the outer CV joint for BMW 3 Serie 330 D, a vital link for transferring power smoothly to the driven wheels. We also supply the inner CV joint for BMW 3 Serie 330 D, which is often the source of harsh driveline shudder under load. These parts are engineered to handle the hefty torque delivery characteristic of the 3.0-litre diesel engine.

Alongside CV joints, the centre bearing for BMW 3 Serie 330 D is a frequently requested replacement part. Because this model is built for covering long distances at sustained high speeds, the prop shaft centre bearings are subjected to prolonged, continuous rotation. We stock three different versions of centre bearings to accommodate the distinct technical variants fitted across various model years and chassis configurations. Securing the exact design is essential for an effortless repair. By choosing quality-assured car parts from our store, you receive robust components built to last, restoring your car's original composure and ride refinement.

How to find the correct part for your BMW 3 Serie 330 D

Proceed directly to the appropriate section for the BMW 3 Serie 330 D:

With multiple potential drivetrain issues on a modern performance vehicle, starting in the correct category saves valuable time. By comparing the dedicated subcategories for the BMW 3 Serie 330 D, you can easily distinguish between drive shaft, CV joint or propeller shaft issues, guiding you to the page that matches your specific symptoms and vehicle setup.

Our cataloguing is continually updated with accurate technical data for the 330 D. If you are unsure which component has developed play or failed, consult our comprehensive product specifications and detailed images. We aim to provide all the technical information you need to order with confidence and have the correct parts delivered straight to your door.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, operating with a central warehouse in Helsingborg, Sweden, dedicated entirely to drivetrain and transmission components. When sourcing parts for your BMW from us, you benefit from a level of technical depth that general car parts stores rarely possess. We understand the precise engineering tolerances that drive shafts and centre bearings require for flawless performance. Our mission is always to deliver the correct part first time, backed by rigorous quality control and a fitment guarantee that ensures your components match your BMW 3 Serie 330 D perfectly.

We know that when a driveline component fails, you want your vehicle back on the road without delay. That is why we provide fast dispatch across the EU to minimise your car's downtime. As a dedicated driveline specialist, we hold our own stock and offer expert customer support ready to answer technical enquiries. Choosing CVJoint24 means choosing proven quality, prompt dispatch and the peace of mind that only a true drivetrain specialist can provide for your BMW.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Serie 330 D

How do I know if my BMW 3 Serie 330 D needs a new outer CV joint?

The most common sign is a rhythmic clicking noise coming from the wheels when turning sharply at low speeds. Also inspect the CV boot for splits or tears, as a split boot quickly leads to premature joint failure.

Why does my BMW 3 Serie 330 D vibrate under acceleration?

Vibrations under load are often caused by a worn inner CV joint or an out-of-balance drive shaft. It can also stem from a worn propeller shaft centre bearing, which is common on high-torque models like the 330 D.

What is the function of a centre bearing on a BMW 3 Serie 330 D?

The centre bearing keeps the prop shaft correctly aligned and dampens rotational vibrations. A sound centre bearing is essential for a smooth, quiet, vibration-free ride.

How do I make sure I find the right parts for my BMW 3 Serie 330 D?

Selecting your car's exact make, model, year and engine variant on cvjoint24.com is the most reliable way to find parts that fit your BMW 3 Serie 330 D perfectly. This automatically filters out parts that are not compatible with your car.

What is included in a CV joint kit from CVJoint24?

Our kits typically include the CV joint itself, a vehicle-specific CV boot, high-quality grease, retaining clamps, and any necessary fitting hardware such as bolts or circlips for a complete installation.

How quickly do you deliver parts for the BMW 3 Serie 330 D?

All in-stock parts are dispatched quickly from our central warehouse. When ordering on a working day, your parts are typically dispatched promptly so you can get your car back on the road without delay.