BMW 3 Serie 330 I Xdrive E92

Spare parts and drivetrain components for BMW 3 Serie 330 I Xdrive E92. Verify fitment by selecting your make, model and engine before ordering.

Products for BMW 3 Serie 330 I Xdrive E92

29 products
1 - 24 of 29
Item no.:0387523
  • ABS teeth: 48
  • Inner diameter: 79 mm
  • Outer diameter: 83 mm
  • Width: 12 mm
Item no.:1135668
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 571 mm
  • ABS teeth: 48
Item no.:4171798
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2116871
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 892 mm
  • ABS teeth: 48
Item no.:0212981
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0200786
  • Position: Front
  • Total length: 738 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:248107
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 500 mm
  • Outer splines: 27
Item no.:356893
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:621215
  • Position: Rear
  • Total length: 1,256 mm
Item no.:7302505
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 890 mm
  • ABS teeth: 49
Item no.:1163018
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 564 mm
  • ABS teeth: 48
Item no.:512446
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:149390
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 43,95 mm
  • Total length: 180 mm
  • Outer splines: 27
Item no.:244850
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 502 mm
  • Outer splines: 27
Item no.:3517689
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:414596
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 635 mm
  • Joint diameter, gearbox side: 102 mm
  • Seal ring diameter: 60 mm
Item no.:0683976
  • Position: Rear
  • Total length: 124 mm
Item no.:0985282
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:0684172
  • Total length: 110 mm
Item no.:0963422
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:690936
  • Position: Rear
Item no.:399267
  • Position: Front
Showing 1–24 of 29 products

Drivetrain for BMW 3 Serie 330 I Xdrive E92

The BMW 3 Serie 330 I Xdrive E92 blends sporting elegance with sophisticated all-wheel-drive engineering. Keeping that sharp, dynamic handling alive requires a drivetrain in first-rate condition. As specialists in drivetrain parts, we offer a carefully chosen range of components tailored specifically to the demands of the E92 coupé platform. Fitted with xDrive, this model places significantly higher loads on every part of the power transmission compared to rear-wheel-drive variants. Every part, from the smallest ABS ring to the complete propeller shaft, plays a vital role in transferring the power of the straight-six engine smoothly to the tarmac. We focus on supplying parts that meet or exceed original equipment specifications to guarantee dependable longevity and optimum performance.

Running a BMW 330i with xDrive means you rely on outstanding grip and roadholding whatever the weather throws at you. However, this demands extra resilience from every drivetrain component, especially during spirited driving or harsh European winters. At CVJoint24, our deep technical know-how helps you find the exact spare parts to restore your car's factory-fresh composure. Choosing the correct parts from the start prevents unnecessary wear and costly damage to neighbouring four-wheel-drive components, such as the transfer box or differentials.

How the drivetrain works on the BMW 3 Serie 330 I Xdrive E92

The drivetrain on the BMW 3 Serie 330 I Xdrive E92 is an intricate system designed to distribute torque between the front and rear axles with intelligent precision. Power flows from the engine through the gearbox and straight into the transfer box. From there, it is channelled along a front and rear propeller shaft to the respective differentials. The differentials then transfer drive out to the wheels via the drive shafts. Because this is an xDrive model, it employs four drive shafts in total—two front and two rear—marking a major structural difference from rear-wheel-drive E92 models. Every component in this setup must work in absolute harmony so that the xDrive system can react instantly to shifting surface grip.

The front drive shafts on an E92 xDrive are particularly susceptible to wear due to the combined forces of steering articulation and constant torque. Meanwhile, the prop shafts rely on universal joints and a centre bearing that must remain in sound mechanical condition to prevent vibration. The ABS rings are mounted at the wheel hubs and are vital for feeding precise wheel-speed readings to the stability control and all-wheel-drive ECUs. A corrupted signal from a cracked ABS reluctor ring can cause erratic xDrive intervention, which is why every individual component in this drivetrain architecture needs to perform flawlessly.

Common faults and symptoms

There are several telltale symptoms that indicate driveline wear on your BMW 3 Serie 330 I Xdrive E92. One of the most frequent is a distinct vibration felt through the floorpan or seat during acceleration, often pointing to an out-of-balance or worn propeller shaft on your BMW 3 Serie 330 I Xdrive E92. A metallic clicking or snapping sound on full steering lock at lower speeds is a classic sign of a worn outer CV joint on one of the front drive shafts. For xDrive drivers, tackling these noises promptly is crucial, as a failing drive shaft will rapidly place undue strain on the entire all-wheel-drive system.

Another common issue is an illuminated ABS warning light or a dashboard message stating that four-wheel drive is deactivated. This is frequently triggered by a corroded, swollen or split ABS ring providing erratic speed signals to the control unit. In addition, split CV boots allow road grime to contaminate the constant velocity joint while slinging out its lubricating grease, quickly destroying the internals. If you feel hesitation or shuddering under heavy throttle, worn inner CV joints may well be to blame. Ignoring these issues risks collateral damage to expensive assemblies like the gearbox or differential, making early diagnosis and replacement the sensible course.

Common parts to replace on the BMW 3 Serie 330 I Xdrive E92

For the BMW 3 Serie 330 I Xdrive E92, we have identified the driveline components most frequently required over the vehicle's lifespan. Our range includes dedicated drive shafts, complete propeller shaft assemblies and precision-machined ABS rings. Our replacement drive shafts are supplied as fully assembled, ready-to-fit units, saving workshop time and ensuring that every constituent part—from the joints to the durable drive shaft boots—meets high quality standards. Because the xDrive system relies on strict rolling-circumference tolerances and balanced rotational speed, dimensionally accurate parts are essential.

The prop shaft is another key assembly that demands attention as mileage climbs, particularly the centre bearing and universal joints, which can dry out, develop play and fail. Fitting a fresh propeller shaft eliminates the intrusive high-speed vibrations commonly felt at motorway cruising speeds. The ABS ring is a small component with a critical role in your car's active safety. Replacing a split or corroded ring will often resolve ABS and DSC error codes cleanly without needing to renew the entire driveshaft, provided the underlying CV joint is still sound. We stock these components in our warehouse to help get your BMW back on the road in top condition without delay.

How to find the right part for your BMW 3 Serie 330 I Xdrive E92

Navigate directly to the relevant parts section for your BMW 3 Serie 330 I Xdrive E92:

On a vehicle with several interdependent driveline assemblies, it makes sense to head straight to the correct category. Comparing the exact component sections for the BMW 3 Serie 330 I Xdrive E92 makes it straightforward to distinguish between faults in a drive shaft, CV joint or propeller shaft, taking you directly to the parts that match your symptoms and vehicle fitment.

Finding the correct replacement parts for a specific model like the 330i xDrive E92 can present challenges due to subtle variations across build dates and optional equipment. To ensure a trouble-free installation, select your vehicle by its exact make, model and engine variant in our store catalogue. This filters our range to show only the parts confirmed for your specific chassis, eliminating the hassle of misordered components and ensuring everything fits straight out of the box. We have meticulously matched our cataloguing against BMW technical data for dependable fitment accuracy.

To make browsing simple, our parts are organised into dedicated subcategories for your car. Use these links to view our current stock:

  • Drive shafts for BMW 3 Serie 330 I Xdrive E92
  • Propeller shafts for BMW 3 Serie 330 I Xdrive E92
  • ABS rings for BMW 3 Serie 330 I Xdrive E92
Following these links will show you the exact components available for your model. If you are ever unsure which part is causing your drivability issue, our knowledgeable customer support team is always on hand with specialist advice for your BMW 3 Serie.

Why choose CVJoint24?

Choosing CVJoint24 means relying on a Swedish driveline specialist with in-depth technical knowledge of power transmission systems. Rather than operating as a general car parts factor selling everything, we focus solely on our specialist field—giving you access to genuine expertise and carefully sourced parts. Our aim is to deliver the right part first time, backed by our clear fitment guarantee. We know that when your BMW is on the ramp you need parts without delay, which is why we dispatch quickly from our central warehouse to customers across Europe. That makes us the reliable choice for both DIY mechanics and professional garages who demand quality, precision and fast dispatch.

We take pride in our specialist standing, pairing a comprehensive stock holding with approachable, expert customer service. Every item in our warehouse is thoroughly inspected against rigorous standards—essential for high-performance cars like the BMW 330i xDrive. Shopping with us means you receive more than just a spare part; you get the confidence of components chosen by specialists who truly understand your vehicle's mechanical layout. Whether you need a replacement ABS ring or a complete drive shaft, we strive to be your most reliable and cost-effective partner for driveline components.

Frequently asked questions about Drivetrain parts for BMW 3 Serie 330 I Xdrive E92

How do I know if a drive shaft fits my BMW 330i xDrive E92?

The most reliable way is to select your car's exact make, model and engine variant in our search tool. Because xDrive models have unique front drive shafts compared with rear-wheel-drive variants, it is essential to ensure the part is specifically designed for four-wheel-drive models.

What are the most common signs of a failing propeller shaft on this model?

The most common symptoms are vibrations throughout the car during acceleration or at specific road speeds, alongside unusual noises from the centre bearing. On an xDrive model, vibrations can also originate from the front propeller shaft.

Can I replace just the ABS ring, or do I need to replace the entire drive shaft?

On the BMW E92, you can often replace only the ABS ring if it has cracked due to corrosion, provided that the CV joint itself is otherwise in good condition. This is a cost-effective repair solution for which we supply the necessary replacement parts.

Why is the correct fitment of drive shafts so critical on an xDrive model?

The xDrive all-wheel-drive system is exceptionally sensitive to mechanical tolerances. Incorrect dimensions on a drive shaft can create excessive tension across the drivetrain, which in the worst cases can damage the transfer box or trigger stability control fault codes.

Do you offer fast delivery for BMW parts?

Yes, we offer next-day dispatch on our in-stock items. We know how important it is to get your BMW 3 Serie 330 I Xdrive E92 back on the road without unnecessary delay.

What does your fitment guarantee mean?

Our fitment guarantee means that if you choose parts using your car's make, model and engine variant and the component unexpectedly does not fit, our team will help you find the correct replacement or arrange a straightforward return.