BMW 3 Serie 335 I F34

Welcome to your specialist for BMW 3 Serie 335 I F34 drivetrain parts. We offer a carefully chosen range of high-grade components to keep your car's power delivery operating smoothly and...

Products for BMW 3 Serie 335 I F34

8 products
1 - 8 of 8
Item no.:0263011
  • Diameter: 24 mm
  • Total length: 62 mm
Item no.:411931
  • Position: Rear left
  • Total length: 748 mm
  • Splines gearbox side: 32
  • Splines wheel side: 28
  • ABS teeth: 0
Item no.:411175
  • Position: Rear left
  • Total length: 739 mm
  • Splines gearbox side: 27
  • Splines wheel side: 28
Item no.:517153
  • Position: Rear right
  • Total length: 820 mm
  • Splines gearbox side: 32
  • Splines wheel side: 28
  • ABS teeth: 0
Item no.:510721
  • Position: Rear right
  • Total length: 793 mm
  • Splines gearbox side: 27
  • Splines wheel side: 28
Item no.:352029
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 31
  • Joint diameter: 86 mm
Item no.:0545928
  • Position: Outer
  • Inner splines: 28
  • Outer diameter: 96 mm
  • Splines wheel side: 28
Item no.:0489055
  • Position: Inner
  • Inner splines: 28
  • Outer diameter: 96 mm
  • Splines wheel side: 32

Drivetrain for BMW 3 Serie 335 I F34

The BMW 3 Serie 335 I F34, also known as the Gran Turismo variant, combines performance with practical versatility and a distinctive body shape. To maintain its dynamic driving experience and superior comfort, the drivetrain must remain in peak condition. The sheer power produced by the potent six-cylinder engine places heavy demands on every single component throughout the system, from the gearbox to the wheel hubs. We supply a comprehensive range of components engineered specifically for this model and its unique characteristics. We understand that every part—whether a complete shaft assembly or a circlip—must deliver uncompromised quality to withstand the rigours of city commuting and high-speed motorway driving alike. By choosing the right spare parts, you extend the lifespan of your vehicle and ensure power transfers smoothly to the road without losses or disruptive vibrations. Covering both front and rear axles, we are your complete specialist supplier for BMW power transmission.

How the drivetrain is configured on the BMW 3 Serie 335 I F34

The drivetrain on a BMW 3 Serie 335 I F34 is a sophisticated setup engineered to handle substantial torque while delivering the balanced power distribution characteristic of the marque. The assembly relies on several critical components working together seamlessly to convert engine power into propulsion. The engine sends drive to the gearbox, which in turn directs it via a propeller shaft to the differential. From there, torque is delivered to the wheels through precision drive shafts. The F34 chassis features specific variations depending on whether it is rear-wheel drive or equipped with the intelligent xDrive all-wheel-drive system, making exact fitment essential. Each driveshaft features both an inner and an outer CV joint to accommodate suspension movement and steering angles without losing torque. This complexity calls for tight engineering tolerances to prevent unbalance and premature wear on bearings and seals, safeguarding the vehicle's long-term mechanical health.

Common faults and symptoms

There are several typical warning signs that drivetrain components are starting to fail on your BMW 335i GT. One of the most frequent symptoms is a distinct clicking or knocking noise on full steering lock at low speeds, which usually points to a worn or damaged outer constant velocity joint. If you notice vibrations through the car body under brisk acceleration instead, an inner CV joint may well be the culprit. Vibrations appearing at specific cruising speeds often indicate prop shaft unbalance or a failing centre bearing. Addressing these symptoms promptly is vital to prevent secondary damage to costly units such as the gearbox or differential. A split CV boot is frequently the root cause, allowing dirt and moisture to penetrate and rapidly ruin the precision-machined internal surfaces. Regular drivetrain inspections are therefore a wise preventative step for any BMW owner.

Common parts to replace on the BMW 3 Serie 335 I F34

Owing to the performance and kerb weight of the BMW 3 Serie 335 I F34, certain drivetrain components naturally experience higher wear rates. We stock a selection of variants tailored to match this model's technical specifications. Replacing worn parts in good time prevents expensive consequential damage and preserves your car's original handling dynamics. Our focus is on supplying components that not only fit physically, but also deliver the high level of performance that BMW drivers demand. These are the most common replacement categories for this model:

  • Drive shafts for BMW 3 Serie 335 I F34 (4 variants available)
  • Outer CV joints for BMW 3 Serie 335 I F34 (2 variants available)
  • Inner CV joints for BMW 3 Serie 335 I F34 (1 variant available)
  • Propeller shafts for BMW 3 Serie 335 I F34 (1 variant available)

Find the right part for your BMW 3 Serie 335 I F34

Select the specific category for your BMW 3 Serie 335 I F34:

When troubleshooting complex drivetrain issues, starting in the right section saves valuable time. By comparing the exact component areas for the BMW 3 Serie 335 I F34, you can readily differentiate between problems in the drive shaft, CV joint or propeller shaft and proceed directly to the parts that match your symptoms and technical requirements.

Navigating varying technical specifications and part numbers can feel daunting, but we make selecting the correct replacement straightforward. The most reliable way to find compatible parts for your BMW 3 Serie 335 I F34 is to filter by your car's exact make, model and engine variant in our shop. This ensures that every component shown matches your chassis setup and drivetrain specifications, eliminating costly ordering mistakes and keeping repair times to a minimum. If you are uncertain whether you require an entire drive shaft assembly or merely a replacement joint, our detailed product descriptions and technical dimensions allow you to verify the exact match against the original part on your car. Our drivetrain specialists are also always on hand to assist you with choosing the right parts for your BMW 3 Serie.

Why buy from CVJoint24?

As the international shop of a Swedish driveline specialist shipping from our central warehouse in Helsingborg, Sweden, we provide a distinctive blend of dedicated technical expertise and comprehensive stock across the EU. Shopping with us gives you the peace of mind that comes with accurate fitment and reliable quality. We recognise that your BMW 3 Serie 335 I F34 demands premium-grade replacement parts to perform as intended; that is why we partner exclusively with trusted manufacturers adhering to strict manufacturing standards. With our strong focus on accurate orders and dependable international delivery, we keep your car's workshop downtime to a minimum. We are proud to support both dedicated DIY mechanics and professional garages seeking specialised drivetrain solutions. Our comprehensive technical understanding of BMW drivetrains ensures you get the expert guidance often missing from generic car parts retailers, guaranteeing a trouble-free repair.

Frequently Asked Questions about Drivetrain Parts for BMW 3 Serie 335 I F34

How do I know if my BMW 335i F34 needs a new drive shaft?

The most common signs are vibrations throughout the car under acceleration or persistent noises from the undercarriage. If vibrations can be felt through the entire body, it is often due to the inner joint or an unbalanced shaft.

Can I replace just the outer CV joint on my BMW 3 Serie?

Yes, provided the drive shaft itself is straight and undamaged, you can save money by replacing just the outer CV joint. We supply standalone joints that include a CV boot, grease and all necessary fitting hardware.

What causes a clicking noise when cornering in a BMW F34?

This is almost always caused by a worn outer CV joint. As the bearings inside the joint wear down, play develops, leading to that characteristic clicking noise when turning on lock.

Are the drive shafts different between rear-wheel drive and xDrive models on the 335i GT?

Yes, there are substantial differences in both length and mounting between these models. Always select your vehicle's make, model and engine variant in our search tool to ensure you get the exact part for your drivetrain.

How quickly can I get my car parts delivered?

We process orders swiftly from our central warehouse to provide fast and reliable delivery across the EU, helping you get your BMW 3 Serie 335 I F34 back on the road without delay.

Is everything needed for fitting included when I buy a CV joint?

Yes, our CV joint kits come complete with a CV boot, high-grade grease, clamps and any circlips or bolts required for a proper installation.