BMW 3 Serie 340 I F34

Welcome to CVJoint24, your specialist for All car makes and drivetrain components for the BMW 3 Serie 340 I F34. This model, known for its potent six-cylinder engine and Gran Turismo...

Products for BMW 3 Serie 340 I F34

4 products
1 - 4 of 4
Item no.:417326
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 28
  • Total length: 748 mm
  • Joint diameter: 96 mm
Item no.:5182971
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 28
  • Total length: 820 mm
  • Joint diameter: 96 mm
Item no.:698847
  • Position: Rear

Drivetrain for BMW 3 Serie 340 I F34

The BMW 3 Serie 340 I F34, also known as the 3 Series Gran Turismo, combines sports-car performance with practical space. Under the bonnet sits the celebrated B58 engine, a straight-six delivering substantial torque to the car's BMW-engineered drivetrain. To transfer this power to the road efficiently and reliably, components must be designed to withstand severe loads. The drivetrain in a 340i is a complex assembly where every component, from the gearbox to the wheel hub, must work in precise harmony. As drivetrain specialists, we understand the specific requirements of the F34 platform, which features a longer wheelbase and different weight distribution compared to the standard saloon.

When servicing or repairing your 340i, never compromise on quality. A high-performance car demands parts that match original equipment specifications so as not to compromise handling balance or active safety systems. We supply components that meet these rigorous standards, allowing you to enjoy your car's full potential without worrying about premature wear or mechanical failure.

How the drivetrain is configured on the BMW 3 Serie 340 I F34

The drivetrain on the BMW 3 Serie 340 I F34 is engineered to manage high output from the turbocharged engine. Power is transmitted from the engine through the gearbox and out to the wheels via drive shafts. On the F34 model, suspension geometry is tuned for comfort and stability, meaning the drive shafts operate at specific angles that demand high-grade CV joints. These joints are packed with specialised grease and shielded by CV boots to minimise friction and keep out road grime.

Because the 340i is equipped with advanced stability systems such as DSC, the mechanical drivetrain parts must remain in flawless condition. Every rotation must be balanced to prevent vibrations transmitting through the chassis, which could compromise comfort and shorten the life of wheel bearings and suspension bushes. Understanding this layout is essential when selecting the correct spare parts for a replacement.

Common faults and symptoms

Despite BMW's advanced engineering, the drivetrain is subject to natural wear and tear, especially on a car delivering as much power as the 340i. One of the most typical signs of wear is a clicking noise when turning sharply on full lock, which often points to a worn outer CV joint. If you experience vibrations through the vehicle during acceleration instead, an inner constant velocity joint or an unbalanced driveshaft may be the cause.

Another telltale sign is grease splattered inside the wheel rim or wheel arch, almost always caused by a split CV boot. When a boot tears, lubricant escapes rapidly and road grit penetrates the joint, causing rapid failure. Paying attention to these early warnings helps prevent costly consequential damage to your BMW 3 Serie. Ignoring driveline vibrations can ultimately damage differential bearings or gearbox output shafts.

Common parts to replace on the BMW 3 Serie 340 I F34

For the BMW 3 Serie 340 I F34, drive shafts are the primary focus during driveline maintenance. Due to the engine's high torque, they face substantial torsional loads during hard acceleration. We often find that replacing complete drive shafts is preferable to rebuilding individual joints, ensuring the entire assembly is balanced and ready for many thousands of kilometres. A drive shaft for BMW 3 Serie 340 I F34 is a precision component that must fit perfectly to avoid imbalance.

Alongside the shafts themselves, check mountings and adjacent hardware. While the shafts endure the bulk of the stress, reliable performance depends on the entire assembly. Replacing a worn part promptly protects your car's residual value and your safety on the road. We supply components selected specifically to handle the demands of the 340i powerplant.

How to find the right part for your BMW 3 Serie 340 I F34

Navigate directly to the appropriate section for the BMW 3 Serie 340 I F34:

On a vehicle with several possible driveline issues, starting in the right category saves time. Comparing the exact component categories for the BMW 3 Serie 340 I F34 makes it straightforward to distinguish between drive shaft, CV joint or propeller shaft issues, leading you to the right fitment for your symptoms.

Once you have selected the right category, verify whether your car has specific options that affect driveline specifications, such as xDrive all-wheel drive or M Sport packages, as these can alter shaft lengths and dimensions. Our customer service team is on hand if you need assistance identifying the correct parts for your BMW 3 Serie 340 I F34.

Why shop at CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders directly from our warehouse in Helsingborg, Sweden. We focus on depth rather than broad general car parts, giving us an unmatched level of driveline expertise. When you order from us, you receive high-quality parts backed by our accurate fitment guarantee, ensuring you get the right part the first time.

With dependable shipping across the European Union, we keep your workshop downtime to a minimum. We combine premium product quality with competitive prices, making us the trusted partner for BMW enthusiasts and professional garages alike. Trust CVJoint24 to keep your drivetrain running smoothly year after year.

Frequently asked questions about drivetrain parts for BMW 3 Series 340 i F34

How do I know if a drive shaft fits my BMW 340i F34?

The most reliable method is to select your vehicle make, model and engine variant in our search selector. Because the F34 model features specific dimensions and the 340i engine demands heavy-duty components, this ensures you receive a part with guaranteed fitment.

What are the most common signs of a worn CV joint on a BMW 3 Series?

The most common symptoms are clicking noises when turning, vibrations under acceleration, or visible grease leaks from a split CV boot. If you experience any of these signs, your drivetrain should be inspected immediately.

Is it difficult to replace a drive shaft on a BMW 3 Series 340 i F34 yourself?

It requires good mechanical knowledge and the correct tools, including a torque wrench and tools to loosen the wheel hub. For an experienced DIY mechanic it is entirely feasible, but we always advise following the vehicle manufacturer's instructions.

What does your fitment guarantee mean?

Our fitment guarantee means that if you have selected your correct vehicle model and engine details and we have recommended a part that still does not fit, we will help you find the correct component with no additional return shipping costs.

Does the drive shaft include everything needed for the replacement?

Yes, our complete drive shafts are supplied fully assembled with inner and outer CV joints as well as CV boots, ready for direct installation on your car for a straightforward repair.

How quickly do you deliver BMW parts?

We aim to dispatch all in-stock parts on the same day the order is placed, ensuring fast delivery directly to customers across the European Union.