BMW 4 Serie 420 D Xdrive F32 F82

Drivetrain components and spare parts for BMW 4 Serie 420 D Xdrive F32 F82. Select your make, model and engine to verify fitment before ordering.

Products for BMW 4 Serie 420 D Xdrive F32 F82

37 products
1 - 24 of 37
Item no.:1115537
  • Position: Front left
  • Total length: 550 mm
  • Splines gearbox side: 27
  • Splines wheel side: 31
Item no.:2181720
  • Position: Front right
  • Total length: 841 mm
  • Splines gearbox side: 27
  • Splines wheel side: 31
Item no.:4129093
  • Position: Rear left
  • Total length: 739 mm
  • Splines gearbox side: 27
  • Splines wheel side: 28
Item no.:5139293
  • Position: Rear right
  • Total length: 793 mm
  • Splines gearbox side: 27
  • Splines wheel side: 28
Item no.:0458978
  • Position: Front left, Inner
  • Inner splines: 24
  • Outer splines: 27
  • Splines gearbox side: 27
Item no.:0572718
  • Position: Front, Outer
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 31
  • Splines wheel side: 31
Item no.:0256107
  • Position: Front
  • Number of joints: 2
  • Total length: 712 mm
Item no.:6209222
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 1
  • Total length: 1,330 mm
Item no.:140205
  • Position: Front left, Inner
  • Inner splines: 24
  • Total length: 483 mm
  • Splines gearbox side: 27
Item no.:643635
  • Position: Rear, Inner
  • Inner splines: 30
  • Total length: 175 mm
  • Splines gearbox side: 27
Item no.:452223
  • Position: Rear, Outer
  • Inner splines: 28
  • Total length: 133 mm
  • Splines wheel side: 30
Item no.:455751
  • Position: Rear, Outer
  • Seal diameter: 57 mm
  • Diameter: 57 mm
  • Total length: 133 mm
  • Splines gearbox side: 25
Item no.:0899175
  • Diameter: 30 mm
  • Height: 54 mm
  • Hole spacing c/c: 160 mm
  • Bearing thickness: 36 mm
Item no.:0637212
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:0580111
  • Position: Outer
  • Inner splines: 33
  • Outer diameter: 86 mm
  • Splines wheel side: 31
Item no.:142610
  • Position: Front left, Inner
  • Seal diameter: 43,95 mm
  • Inner splines: 24
  • Total length: 183,5 mm
  • Splines gearbox side: 27
Item no.:247092
  • Position: Front right, Inner
  • Seal diameter: 29,97 mm
  • Inner splines: 24
  • Total length: 474,5 mm
  • Splines gearbox side: 27
Item no.:647953
  • Position: Rear, Inner
  • Seal diameter: 57,4 mm
  • Inner splines: 25
  • Total length: 133 mm
  • Splines gearbox side: 25
Item no.:0942163
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Item no.:0652204
  • Total length: 124 mm
Item no.:0670393
  • Total length: 119 mm
Item no.:0934671
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Showing 1–24 of 37 products

Drivetrain for BMW 4 Serie 420 D Xdrive F32 F82

The BMW 4 Serie 420 D Xdrive F32 F82 represents a sophisticated blend of sporty handling and four-wheel-drive stability. To preserve the unique driving feel that BMW is renowned for, drivetrain components must withstand the substantial torque generated by the diesel engine alongside the precise demands of the xDrive system. The drivetrain is the heart of your vehicle's power transmission, and every part—from the smallest boot to the complete propeller shaft—plays a vital role. As a specialist in all car makes, we understand the technical demands of this specific model series. Whether you drive a Coupé (F32) or the specific F82 variant, the requirements for durability and fitment are uncompromising. We have assembled the most relevant parts so you can carry out repairs using components that meet or exceed original specifications, ensuring your car continues to transfer its power efficiently to the road and remains reliable for many kilometres to come.

How the drivetrain is engineered on the BMW 4 Serie 420 D Xdrive F32 F82

The layout of the drivetrain on a BMW 4 Serie 420 D Xdrive F32 F82 is a remarkable feat of engineering, relying on several critical stages to distribute power to all four wheels. Engine torque passes first through the gearbox to a transfer box, which then directs drive via BMW-specific propeller shafts to both the front and rear axles. On the front axle, the drive shafts must accommodate both steering angles and suspension travel, placing exceptionally high demands on the outer and inner CV joints. The rear axle focuses primarily on direct propulsion, yet still requires robust components to handle sudden acceleration. Because the xDrive system constantly monitors traction and alters power delivery, even minor play or imbalance in a drive shaft or prop shaft can impair stability and reduce component longevity. Understanding this complex chain is crucial when selecting the correct spare parts during maintenance or repair, avoiding unnecessary wear on expensive units such as the transfer box.

Common faults and symptoms

There are several distinct signs that drivetrain components on your BMW 4 Serie 420 D Xdrive F32 F82 are beginning to wear. One of the most typical symptoms is a clicking or knocking sound on full steering lock, which generally points to a worn outer CV joint. If you experience vibrations through the entire vehicle during acceleration, it often suggests that an inner constant velocity joint has developed play. On xDrive models, it is equally important to pay attention to vibrations felt through the floor or seats, as these are frequently caused by imbalance or wear in the propeller shaft or its centre bearing. Because four-wheel-drive systems are sensitive to uneven power delivery, even minor defects can cause secondary damage to the transfer box if not rectified promptly. Acting early when these symptoms appear saves money and prevents you from being stranded with complete driveline failure, which is significantly more expensive to repair.

Common parts to replace on the BMW 4 Serie 420 D Xdrive F32 F82

In our range for the BMW 4 Serie 420 D Xdrive F32 F82, we have identified the most critical components that frequently require replacement to maintain optimum performance. We stock multiple variations of drive shaft assemblies to suit the different positions and specifications of the xDrive setup. Additionally, we provide 2 types of outer CV joints and 1 specific inner CV joint, enabling cost-effective repairs when the entire shaft assembly does not need renewing. For drivers experiencing driveline vibrations running along the length of the car, we supply different propeller shafts. These parts are carefully engineered to cope with the torque demands of the 420d engine. Selecting the relevant category allows you to quickly locate the precise component required for your repair—whether that is a front driveshaft exposed to road salt and grit, or a prop shaft balanced to eliminate intrusive cabin vibrations.

Finding the right part for your BMW 4 Serie 420 D Xdrive F32 F82

Navigate to the correct subcategory for your BMW 4 Serie 420 D Xdrive F32 F82:

When dealing with multiple potential driveline issues, it pays to start directly in the appropriate section. By comparing the exact component categories for the BMW 4 Serie 420 D Xdrive F32 F82, you can easily distinguish between drive shaft, CV joint, or prop shaft faults and proceed to the section that best matches your symptoms and fitment criteria.

Finding the right component for a technologically advanced car like the BMW 4 Serie 420 D Xdrive F32 F82 demands precision. The most reliable way to ensure a part fits your specific vehicle is to select your exact make, model and engine variant in our catalogue filter. This refines our selection to only the components that are technically compatible with your car's chassis and drivetrain. To make navigation straightforward, we have organised our range into clear categories that you can explore directly:

  • Drive shafts for BMW 4 Serie 420 D Xdrive F32 F82
  • Outer CV joints for BMW 4 Serie 420 D Xdrive F32 F82
  • Inner CV joints for BMW 4 Serie 420 D Xdrive F32 F82
  • Propeller shafts for BMW 4 Serie 420 D Xdrive F32 F82
Following these links takes you straight to the parts relevant to your car's drivetrain. We always recommend cross-checking technical specifications against your existing components, but our vehicle selector significantly reduces the risk of incorrect orders, saving both time and frustration during installation.

Why shop with CVJoint24

Choosing CVJoint24 for your BMW 4 Serie 420 D Xdrive F32 F82 spare parts means partnering with a Swedish driveline specialist shipping across the EU from our Helsingborg warehouse. We focus dedicatedly on drivetrain and power transmission components, giving us unmatched technical expertise and catalogue depth that general car parts retailers rarely match. Our fitment guarantee means you can buy with total confidence; simply filter by your vehicle's make, model and engine to find the exact replacement. We understand how critical it is to get your vehicle back on the road quickly, which is why we offer fast EU dispatch on all stocked products. With exceptional product relevance, experienced technical support, and an authentic passion for driveline engineering, we are the trusted choice for BMW owners who refuse to compromise on quality or service. Choose the right part first time and benefit from a specialist that truly understands your vehicle's transmission.

Frequently Asked Questions about Drivetrain Parts for BMW 4 Series 420 D xDrive F32 F82

How do I know which drive shaft fits my BMW 420d xDrive?

The most reliable method is to select your exact make, model and engine variant in our store. Because xDrive models require specific drive shaft lengths and splines compared to rear-wheel-drive versions, this ensures you receive a replacement with the correct fitment.

What are the symptoms of a worn outer CV joint?

The most common sign is a rhythmic clicking noise when turning sharply at low speeds. If the sound disappears when driving straight ahead, this strongly indicates that the outer constant velocity joint needs replacing.

Can I replace just the CV joint, or do I have to replace the complete drive shaft?

On many BMW models, including the 4 Series, you can replace just the outer or inner CV joint if the shaft itself remains undamaged. This is often a more economical solution. We supply both individual CV joints and complete drive shafts.

Why does my car vibrate under hard acceleration?

Vibrations under load are frequently caused by wear in the inner CV joint. As the joint wears, play develops that prevents the shaft from rotating centrally under torque, sending vibrations directly through the chassis.

What does the propeller shaft do on my xDrive?

The propeller shaft transfers torque from the gearbox/transfer box to the rear axle (and to the front axle via an additional shaft). If the prop shaft is unbalanced or its centre bearing is worn, it often causes whining noises or distinct vibrations at specific speeds.

How quickly do you deliver parts for the BMW 4 Series?

We dispatch quickly from our Swedish central warehouse across the European Union. Our goal is to get your parts delivered promptly to keep workshop downtime to a minimum.