BMW 4 Serie 420 I Xdrive F36

Spare parts and drivetrain components for BMW 4 Serie 420 I Xdrive F36. Check fitment by choosing your make, model and engine before ordering.

Products for BMW 4 Serie 420 I Xdrive F36

38 products
1 - 24 of 38
Item no.:1133582
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 550 mm
  • Joint diameter: 86 mm
Item no.:2143032
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 841 mm
  • Joint diameter: 86 mm
Item no.:4116176
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 739 mm
  • Joint diameter: 90 mm
Item no.:5154279
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 793 mm
  • Joint diameter: 90 mm
Item no.:0459392
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 184 mm
  • Joint diameter: 82 mm
Item no.:0577196
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:0278498
  • Position: Front
  • Total length: 712 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 77 mm
Item no.:5169280
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 805 mm
  • Joint diameter: 77 mm
Item no.:146330
  • Position: Front left, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Total length: 483 mm
Item no.:7316272
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 750 mm
Item no.:7316270
  • Position: Rear
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 748 mm
  • Joint diameter: 77 mm
Item no.:7316267
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 751 mm
  • Joint diameter: 84 mm
Item no.:0829978
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:355153
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:516773
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 802 mm
Item no.:247912
  • Position: Front right, Inner
  • Inner splines: 24
  • Splines gearbox side: 27
  • Seal diameter: 29,97 mm
  • Total length: 474,5 mm
Item no.:646134
  • Position: Rear, Inner
  • Inner splines: 30
  • Seal diameter: 43,9 mm
  • Total length: 101 mm
  • Outer splines: 27
Item no.:658156
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 57 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:0675750
  • Total length: 97 mm
Item no.:0913090
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Item no.:0673090
  • Position: Rear
  • Total length: 124 mm
Item no.:0633695
  • Total length: 98 mm
Item no.:0695913
  • Total length: 110 mm
Showing 1–24 of 38 products

Drivetrain for BMW 4 Serie 420 I Xdrive F36

Maintaining the drivetrain on a BMW 4 Serie 420 I Xdrive F36 is crucial for preserving the dynamic driving experience BMW is renowned for. The F36 generation, also known as the Gran Coupé, combines elegance with performance, and the xDrive all-wheel-drive system requires all transmission components to operate in complete harmony. A healthy drivetrain ensures torque from the turbocharged engine is distributed smoothly to all four wheels, delivering maximum grip and stability in all weather conditions.

Here at CVJoint24, you will find a dedicated range of components tailored specifically to this model. We understand that precision is key when maintaining German premium cars, which is why we only supply parts engineered to meet or exceed original equipment specifications. Whether you need to replace a worn constant velocity joint or a complete drive shaft, you can trust our products to handle the substantial demands of all-wheel drive. Choosing the right parts extends the service life of your vehicle and helps avoid expensive secondary damage to the gearbox and transfer box.

How the drivetrain is configured on the BMW 4 Serie 420 I Xdrive F36

The drivetrain on a BMW 4 Serie 420 I Xdrive F36 is a sophisticated assembly designed to handle high torque with complete refinement. The system relies on several core components working in unison to propel the car. At the centre of the assembly is the propeller shaft, which transfers power from the gearbox to the rear differential, while a separate shaft directs drive forward to the front axle via a transfer box. For this specific model, we stock products covering the most frequent power transmission requirements.

The range includes seven different drive shafts, reflecting the variations found across different production dates and specific vehicle trim levels. The front axle on xDrive models is particularly complex, as it must transmit power while accommodating steering angles. Here, the outer and inner CV joints play a vital role. We have two specific outer CV joints and one inner CV joint listed to ensure you find an exact match. Additionally, two variants of prop shafts are available, which are critical for eliminating vibrations throughout the longitudinal driveline.

Common faults and symptoms

There are several telltale signs that drivetrain components on your BMW 4 Serie 420 I Xdrive F36 are wearing out. One of the most frequent symptoms is a distinct clicking or knocking noise when taking tight corners at low speeds. This typically points to a failing outer CV joint on your BMW 4 Serie 420 I Xdrive F36, often caused by a split CV boot that has allowed grease to escape and road dirt to enter. If left unattended, this can result in total joint failure and a sudden loss of drive.

Another common symptom is vibration felt through the floorpan or seats during acceleration. This can frequently be traced to a worn inner CV joint on your BMW 4 Serie 420 I Xdrive F36 or an imbalance in the propeller shaft. Because the xDrive system is sensitive to rolling circumference differences and mechanical resistance, even minor play in the driveline can upset the vehicle's all-wheel-drive operation. If you notice shuddering or unusual noises from underneath the car, inspect the components promptly before they damage pricier units such as the differential.

Common parts to replace on the BMW 4 Serie 420 I Xdrive F36

When maintaining the BMW 4 Serie 420 I Xdrive F36, certain components endure more mechanical stress than others. Drive shafts are continuously subjected to engine torque, suspension travel and road grime, making them a common replacement item. With seven distinct options in our stock, we cover requirements for both the front and rear axles. Replacing a complete driveshaft is often far more cost-effective than attempting to rebuild an old shaft with multiple worn parts.

In addition to drive shafts, the propeller shaft requires routine inspection. We offer two propeller shaft variants for the BMW 4 Serie 420 I Xdrive F36, fully balanced and ready to fit. Worn centre bearings or universal joints on the prop shaft can produce intrusive vibrations that spoil the refined ride of your BMW. Selecting top-quality spare parts from the start ensures your car retains its sharp handling characteristics. It is also wise to inspect the drive shaft boots regularly; replacing an inexpensive rubber boot early can prevent a costly CV joint failure.

Finding the right part for your BMW 4 Serie 420 I Xdrive F36

Explore the relevant component categories for your BMW 4 Serie 420 I Xdrive F36:

When dealing with potential drivetrain issues, targeting the right component category directly saves both time and effort. Comparing the exact categories for the BMW 4 Serie 420 I Xdrive F36 helps you quickly distinguish between drive shaft, CV joint, or prop shaft faults, leading you straight to the correct fitment.

Navigating different car parts can seem daunting, especially on an advanced model like the BMW 4 Serie 420 I Xdrive F36. To make the process straightforward and reliable, select your car's exact make, model and engine variant in our store. Filtering by your exact vehicle specification ensures you only view parts that are fully compatible, preventing incorrect orders and guaranteeing a precise fit every time.

Here are the key categories for your vehicle to explore directly:

  • Drive shafts for BMW 4 Serie 420 I Xdrive F36
  • Outer CV joints for BMW 4 Serie 420 I Xdrive F36
  • Inner CV joints for BMW 4 Serie 420 I Xdrive F36
  • Propeller shafts for BMW 4 Serie 420 I Xdrive F36
Clicking through to these sections gives you a full overview of available parts, detailed technical specifications and pricing. The team at All car makes specialist CVJoint24 is always on hand to assist you from part identification through to dispatch.

Why shop at CVJoint24?

CVJoint24 is the international store of a Swedish driveline specialist, dispatching high-grade components directly from our central warehouse in Helsingborg, Sweden, to customers throughout the EU. Our business is built on deep technical know-how and a genuine focus on power transmission engineering. When buying parts for your BMW 4 Serie from us, you get the reassurance of dealing with knowledgeable specialists who understand your car's exact mechanical demands.

We combine a wide selection with fast order processing, minimising unnecessary downtime for your vehicle in the garage. As driveline specialists, we focus exclusively on these critical components, allowing us to provide higher quality parts and expert support compared to general motor factors. Choose CVJoint24 for a hassle-free purchase, spot-on fitment, and drivetrain components engineered to last for thousands of kilometres across European roads.

Frequently Asked Questions about Drivetrain Parts for BMW 4 Serie 420 I Xdrive F36

How do I know if my BMW 420i xDrive needs a new drive shaft?

The most common signs are vibrations under acceleration, clicking noises when cornering, or visible grease leaks from torn CV boots. If the vibrations increase with vehicle speed, it often indicates an imbalance or wear in the drive shaft.

Do all BMW 4 Series CV joints fit my 420i xDrive F36?

No, xDrive models often feature specific dimensions and spline counts compared to rear-wheel-drive versions. Always select your car's make, model, and engine variant in our selector to ensure you get the exact part for your specific F36 model.

What is the difference between the inner and outer CV joint on this model?

The outer CV joint sits closest to the wheel hub and accommodates steering angles, meaning wear typically causes clicking noises when cornering. The inner CV joint sits closest to the gearbox or differential and accommodates suspension plunge; wear here usually causes vibrations under acceleration.

Why does my BMW 420i xDrive vibrate under acceleration?

Vibrations during acceleration on an all-wheel-drive BMW are often caused by worn inner CV joints or propeller shaft issues, such as a worn centre bearing or universal joint. It is important to resolve this promptly to avoid damaging the transfer box.

Can I replace just the CV boot instead of the entire CV joint?

Yes, if you catch the damaged boot early before dirt and moisture penetrate the joint, you can simply replace the CV boot and repack it with fresh grease. However, if the joint has already started clicking or knocking, it must be replaced.

How quickly will parts for my BMW be delivered?

We aim for next-day dispatch on all in-stock items. When you place your order during normal weekday working hours, your parts are usually dispatched the same day to get your repair underway as quickly as possible.