BMW 5 Serie 520 I E39

Drivetrain components and spare parts for BMW 5 Serie 520 I E39. Select your make, model and engine before ordering to ensure correct fitment.

Products for BMW 5 Serie 520 I E39

14 products
1 - 14 of 14
Item no.:6171936
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 640 mm
  • Joint diameter: 87 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:6136364
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 615 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 103 mm
Item no.:0298345
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:315974
  • ABS teeth: 30
Item no.:6227092
  • Position: Rear
  • Number of joints: 3
  • Number of centre bearings: 1
Item no.:410873
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 643 mm
  • Thread size: M27x1.5
Item no.:624087
  • Position: Rear
  • Total length: 1,606 mm
  • Outer diameter 1: 94 mm
  • Bolt circle diameter 1: 80 mm
  • Outer diameter 2: 14 mm
Item no.:616158
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 650 mm
  • Joint diameter, gearbox side: 94 mm
  • Thread size: M27x1.5
Item no.:0957310
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:699250
  • Position: Rear
Item no.:690955
  • Position: Rear

Drivetrain for BMW 5 Serie 520 I E39

The BMW 5 Serie 520 I E39 is an iconic saloon that demands precision in every spare part. The drivetrain is the core of your car's performance, ensuring engine power is delivered efficiently to the road. As specialists in All car makes drivetrains, we understand the exacting requirements of this specific model. The E39 chassis is renowned for its balanced handling, but over time components such as drive shafts and propeller shafts suffer wear, compromising both ride comfort and safety. We have dedicated our range to supplying the exact parts required to restore your vehicle's original driving dynamics. Selecting the correct components from the outset avoids unnecessary repairs and significantly extends the life of your car. Our focus is on providing spare parts that meet or exceed original specifications, which is vital for a premium car like a BMW.

How the drivetrain is configured on the BMW 5 Serie 520 I E39

The drivetrain layout of the BMW 5 Serie 520 I E39 follows the classic rear-wheel-drive blueprint with a longitudinally mounted engine. Power is transmitted from the gearbox via a robust propeller shaft running down the centre of the car. This prop shaft is typically a two-piece design supported by a centre bearing to eliminate unwanted vibrations. At the rear axle, power is distributed through the differential to the wheels via two drive shafts. For the 520i, it is essential that these driveline components are perfectly balanced. Because the E39 features sophisticated rear suspension, driveshaft operating angles and joints play a critical role in how the vehicle handles road imperfections and acceleration. Every part in this chain, from the flex disc (guibo) at the gearbox to the outer CV joints, must work in seamless harmony. Any fault in these parts can quickly cause secondary damage throughout the transmission line, making high-quality spare parts an absolute priority for every owner of a BMW 5 Serie.

Common faults and symptoms

Diagnosing drivetrain issues on a BMW 5 Serie 520 I E39 requires paying close attention to specific vibrations and noises. One of the most typical symptoms of a worn propeller shaft is vibration through the cabin floor, often noticeable between 80 and 110 km/h. This is usually caused by a failing centre bearing or worn universal joints. Conversely, a clicking or popping noise when cornering tightly or pulling away often points to a worn CV joint on a drive shaft. On the 520i, vibrations under heavy acceleration can also indicate internal wear within the inner driveshaft joints. These warning signs should never be ignored, as an unbalanced component can lead to extensive damage to the differential or gearbox. Oil weeping around the rear axle may also indicate that axle seals need replacing when the drive shafts are serviced. Addressing these issues at the first sign of wear will save you costly repairs and keep your BMW driving safely.

Common replacement parts for BMW 5 Serie 520 I E39

When maintaining your BMW 5 Serie 520 I E39, certain components undergo more strain than others. In our catalogue you will find precision-engineered parts designed to keep your power delivery smooth and dependable. For this model, we currently supply the following categories:

  • Drive shafts for BMW 5 Serie 520 I E39 – We supply dedicated replacement units tailored for the rear axle.
  • Propeller shafts for BMW 5 Serie 520 I E39 – We offer several options to suit different variations of the E39 520i.

Alongside these main components, it is always wise to inspect related parts such as the propshaft flex disc, centre bearing, and CV boots. A split CV boot allows road dirt to penetrate the joint while flinging out vital grease, rapidly destroying the constant velocity joint. Replacing a damaged boot early is an exceptionally cost-effective preventive measure. Fitting brand-new, accurately matching components is the only way to retain the renowned driving dynamics of a well-maintained BMW.

How to find the right part for your BMW 5 Serie 520 I E39

Navigate directly to the relevant subcategory for your BMW 5 Serie 520 I E39:

With several possible sources of drivetrain issues, it pays to start in the correct section immediately. By comparing the specific categories for the BMW 5 Serie 520 I E39, you can easily distinguish between drive shaft, CV joint, or prop shaft faults, leading you directly to the parts that match your car's symptoms and specifications.

Sourcing the correct replacement part for a BMW 5 Serie 520 I E39 can occasionally be tricky due to technical revisions introduced across the model's production run. The most reliable way to select the right component is to filter by your car's make, model, and engine variant in our store. This narrows down the selection to parts technically verified for your specific chassis setup. Because we offer multiple options for this model, precision is essential. Always double-check critical specifications against your existing parts, especially the overall length of the propeller shaft or the spline count on the drive shaft ends. If you require assistance, our technical specialists are on hand to advise. Our catalogue is structured to make finding the right part straightforward and hassle-free, ensuring a perfect fit first time.

Why shop with CVJoint24

CVJoint24 is your dedicated partner for BMW 5 Serie 520 I E39 drivetrain parts. As the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden, we focus exclusively on power transmission, giving us deeper expertise than generic motor factors. We know how important it is to get your vehicle back on the road quickly, which is why we process orders promptly from stock. Every product in our range is carefully selected for premium build quality, delivering dependable performance at competitive prices. We combine specialist technical know-how with an easy online shopping experience. By selecting your car's make, model, and engine, you can order with absolute confidence. When you shop with CVJoint24, you benefit from decades of specialist driveline experience, making us the premier choice for BMW owners who refuse to compromise on quality and reliability.

Frequently Asked Questions about Drivetrain for BMW 5 Series 520 I E39

Which components make up the drivetrain on a BMW 5 Series 520 I E39?

The drivetrain consists of components that transfer power from the gearbox to the wheels, including the propeller shaft, differential, and rear drive shafts.

How do I know if the drive shaft on my BMW E39 520i needs replacing?

Common signs include clicking noises when taking sharp corners, vibrations during acceleration, or visible damage and grease leaks from the CV boots.

Do all propeller shafts fit every E39 520i?

No, the prop shaft can vary in length and specification depending on whether the car has a manual or automatic gearbox, as well as the specific production year.

Can I replace just the CV joint, or do I need to replace the entire drive shaft?

On the BMW E39, replacing the complete drive shaft is often recommended to ensure optimal balance and long-term driveline reliability.

What causes vibrations in my BMW 520i at speeds around 90 km/h?

Vibrations within this speed range are often caused by an imbalanced propeller shaft, a worn centre bearing, or a degraded flex disc (guibo).

How does the fitment guarantee work at cvjoint24.com?

By selecting your specific BMW 520i E39 model, year, and engine, we filter parts that are technically verified for your vehicle, ensuring an accurate fit.