BMW 5 Serie 520 I F10

Drivetrain parts and components for the BMW 5 Serie 520 I F10. Verify fitment by selecting your make, model and engine before ordering.

Products for BMW 5 Serie 520 I F10

22 products
1 - 22 of 22
Item no.:5137340
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 815 mm
  • Joint diameter: 87,8 mm
Item no.:6233528
  • Position: Rear
  • Total length: 1,718 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:5143160
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 829 mm
  • Joint diameter: 94 mm
Item no.:624585
  • Position: Rear
  • Total length: 1,575 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 16 mm
Item no.:650550
  • Position: Rear, Outer
  • Splines gearbox side: 30
  • Splines wheel side: 25
  • Total length: 135 mm
Item no.:519824
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 819 mm
  • Joint diameter: 93,8 mm
Item no.:0577806
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 30
  • Outer diameter: 90 mm
Item no.:512604
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 819 mm
  • Joint diameter: 96 mm
Item no.:414726
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 765 mm
  • Joint diameter: 96 mm
Item no.:414088
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 758 mm
  • Joint diameter: 88 mm
Item no.:511185
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 811 mm
  • Joint diameter: 88 mm
Item no.:415893
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 767 mm
  • Joint diameter: 94 mm
Item no.:513036
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 823 mm
  • Joint diameter: 94 mm
Item no.:414079
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 764 mm
  • Joint diameter: 87,8 mm
Item no.:646649
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 64,9 mm
  • Total length: 135 mm
  • Outer splines: 30
Item no.:643344
  • Position: Rear, Inner
  • Inner splines: 25
  • Seal diameter: 43,9 mm
  • Total length: 152 mm
  • Outer splines: 27
Item no.:646750
  • Position: Rear, Inner
  • Inner splines: 28
  • Seal diameter: 65 mm
  • Total length: 139 mm
  • Outer splines: 30
Item no.:642217
  • Position: Rear, Inner
  • Inner splines: 28
  • Splines gearbox side: 27
  • Seal diameter: 43,95 mm
  • Total length: 155 mm
Item no.:0954404
  • Inner diameter: 43 mm
  • Outer diameter: 90 mm
Item no.:696614
  • Position: Rear
Item no.:691525
  • Position: Rear

Drivetrain for BMW 5 Serie 520 I F10

The BMW 5 Serie 520 I F10 is renowned for its sheer driving pleasure and engineering precision, demanding top quality from every single component. To preserve this distinctive feel, you need a drivetrain in prime condition. Power transmission is the heart of the car's dynamics, and every part must work together seamlessly to transfer output from the engine to the road without losses or disruption. Here at CVJoint24, you will find the specific components required to service and repair your F10 model with utmost precision.

We focus on supplying parts that meet or exceed original equipment specifications, which is vital for a premium vehicle. Choosing the right parts safeguards not only your car's operational reliability, but also its resale value and long-term performance. We are proud to be a Swedish driveline specialist who understands the exacting needs of BMW owners. The F10 generation represents an era of sophisticated technology balancing comfort and sportiness, and a well-maintained drivetrain is the key to preserving this balance for many kilometres to come.

How the drivetrain is engineered on the BMW 5 Serie 520 I F10

The drivetrain layout of a BMW 5 Serie 520 I F10 is a masterclass in German engineering where balance and efficiency take centre stage. As a rear-wheel-drive or all-wheel-drive saloon, it relies on a robust propeller shaft to transfer torque from the gearbox to the rear axle. Power is then delivered to the wheels via high-quality drive shafts designed to withstand heavy loads during both hard acceleration and cornering. The system is engineered to handle output with minimal energy loss and maximum response.

Every link in this chain, from universal joints to centre bearings, plays a decisive role in the driving experience. A drivetrain in good working order reduces vibration and optimises fuel economy by minimising mechanical drag across rotating assemblies. For the 520 I F10, precision in these components is especially important to preserve the quiet, smooth ride for which the model is famed. The harmony between engine torque and wheel grip relies entirely on these components, making them one of the most worthwhile investments in your vehicle's health.

Common faults and symptoms

There are several telltale signs that the drivetrain in your BMW is wearing out and requires attention. One of the most frequent symptoms is vibration felt through the bodyshell or steering wheel under acceleration, often traceable to an issue with a BMW 5 Serie 520 I F10 driveshaft or prop shaft imbalance. A distinct clicking noise on full steering lock typically points to a worn outer CV joint. On vehicles fitted with a propeller shaft, a whining or rumbling sound often indicates that the centre bearing or universal joints are failing.

It is equally vital to check the CV boots regularly; if a boot splits, road dirt and moisture penetrate the joint while grease escapes, accelerating wear drastically. Ignoring these symptoms can lead to costly consequential damage to the gearbox or differential as vibrations reverberate through the entire assembly. Early diagnosis and replacing worn parts promptly will always save you time and money. A BMW should feel planted and refined, and any departure from that standard warrants prompt inspection.

Common parts to replace on the BMW 5 Serie 520 I F10

When it is time to service or repair your BMW 5 Serie 520 I F10, certain components are naturally more prone to wear than others. Drawing on our technical expertise and warehouse inventory, the following categories are the most relevant for this specific model variant to ensure dependable operation:

  • Drive shafts for BMW 5 Serie 520 I F10: We stock specific versions tailored to different fitting positions and technical specifications to ensure flawless operation.
  • Propeller shafts for BMW 5 Serie 520 I F10: We supply 3 different variants to match the exact requirements of this model series and its power transfer layout.

These components are essential for eliminating driveline vibrations and restoring a smooth ride. Replacing worn shafts with correctly fitted new units reinstates the car's factory driving dynamics and handling precision. When troubleshooting, we always recommend inspecting both the drive shafts and the propeller shaft together to catch any interacting faults. Choosing the correct part from the outset saves workshop hours and prevents future headaches.

How to find the right part for your BMW 5 Serie 520 I F10

Navigate directly to the relevant category for the BMW 5 Serie 520 I F10:

When dealing with a vehicle that has multiple potential driveline issues, starting in the right category is key. By comparing the specific sections for the BMW 5 Serie 520 I F10, you can readily tell drive shaft, CV joint, or prop shaft faults apart and move straight to the product line that matches your symptoms and fitment.

Finding the correct replacement part for an advanced car like the BMW 5 Serie can seem daunting given the variety of specifications, engines, and equipment packages. At CVJoint24, we have streamlined the selection process for total peace of mind. Simply select your BMW 5 Serie 520 I F10 make, model and engine variant in our search filter to display only parts verified for your car. This removes the guesswork and prevents incorrect orders.

We have carefully mapped our catalogue to precise vehicle specifications to offer an exact-fit guarantee. If you are unsure which component you require, our system will guide you straight to the drive shaft or propeller shaft engineered for your vehicle's chassis and model year. Our database is continuously updated so you can order with confidence, knowing the parts will install cleanly without modification.

Why shop with CVJoint24

CVJoint24 is your Swedish driveline and power transmission specialist for BMW, delivering throughout the EU. We stand out thanks to our specialised technical expertise and exclusive focus on drivetrain components, offering in-depth knowledge that general car-parts retailers often lack. When ordering from us, you get high-quality spare parts backed by our fitment guarantee, delivered straight to your door or chosen pickup point.

We know how essential your car is to daily life, which is why we despatch stocked parts swiftly from our central Swedish warehouse. Combining dependable parts with an intuitive platform and prompt, knowledgeable customer service, we are the trusted choice for BMW drivers across Europe. Our goal is to help you pick the right component first time and get your car back on the road quickly, with components built to last for miles ahead.

Frequently Asked Questions about BMW 5 Serie 520 I F10 Drivetrain Parts

How do I know if my BMW 5 Serie 520 I F10 needs a new drive shaft?

The most common signs are vibrations during acceleration or clicking noises when cornering. If you notice the car shaking at certain speeds, you should inspect the drive shafts immediately.

Do all propeller shafts fit every F10 model?

No, there are different designs depending on the gearbox and drive configuration. Always use our search tool by selecting your make, model and engine to find the exact propeller shaft for your 520 I F10.

How many variants of drive shafts do you stock for the BMW 520 I F10?

We currently offer 3 different drive shaft variants in our range tailored specifically for the BMW 5 Serie 520 I F10 to cover different positions and requirements.

Do you offer a guaranteed fit on drivetrain parts?

Yes, when you select your vehicle by make, model and engine and choose a recommended part, we provide a full fitment guarantee so you can buy with total confidence.

How quickly can I get my propeller shaft delivered?

We offer fast delivery across the EU on our stocked propeller shafts, helping you get your BMW 5 Serie 520 I F10 back on the road in no time.

Why should I choose CVJoint24 instead of a general car parts retailer?

We are dedicated drivetrain specialists. This means we have in-depth technical expertise, accurate fitment precision, and a much more focused product range than general car parts retailers.