BMW 5 Serie 530 I E39

Drivetrain components and spare parts for BMW 5 Serie 530 I E39. Select your make, model and engine to ensure correct fitment before ordering.

Products for BMW 5 Serie 530 I E39

14 products
1 - 14 of 14
Item no.:6110800
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 615 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 103 mm
Item no.:6181915
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 620 mm
  • Joint diameter: 102 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:0294801
  • Diameter: 25 mm
  • Bearing thickness: 29 mm
  • Hole spacing c/c: 160 mm
Item no.:316091
  • ABS teeth: 30
Item no.:629085
  • Position: Rear
  • Total length: 1,606 mm
  • Outer diameter 1: 94 mm
  • Bolt circle diameter 1: 80 mm
  • Outer diameter 2: 14 mm
Item no.:0498754
  • Position: Rear, Inner
  • Inner splines: 25
  • Outer diameter: 100 mm
Item no.:0984458
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:694303
  • Position: Rear
Item no.:697125
  • Position: Rear
Item no.:641214
  • Position: Rear, Inner
  • Inner splines: 25
  • Total length: 26 mm

Drivetrain for BMW 5 Serie 530 I E39

The BMW 5 Serie 530 I E39 is an iconic executive car renowned for its balance and performance. The drivetrain in this model is central to the driving experience, transferring power from the straight-six engine to the rear wheels with minimal loss and pinpoint precision. As the E39 generation has reached an age where mechanical wear is inevitable, choosing the right spare parts is vital to preserve the car's longevity. At CVJoint24, we understand the technical demands of the 530i model and supply components that meet or exceed original equipment specifications. Maintaining your drivetrain is not merely about replacing broken components; it is about proactively preventing vibrations and unusual noises from spreading and damaging adjacent transmission parts. Choosing the correct parts for your BMW 5 Serie is an investment in both safety and driving refinement.

Drivetrain layout on the BMW 5 Serie 530 I E39

The drivetrain layout on the BMW 5 Serie 530 I E39 follows the classic front-engine, rear-wheel-drive configuration. Power travels from the gearbox via a two-piece propeller shaft, supported by a centre bearing and a rubber coupling (giubo) to dampen vibrations. From the prop shaft, torque enters the rear differential, which distributes drive to the rear wheels through two drive shafts. Each drive shaft is fitted with inner and outer CV joints protected by durable CV boots. On an E39 530i, these components are engineered to withstand substantial torque, but over time the rubber boots perish and the grease escapes, leading to rapid joint wear. The propeller shaft centre bearing is also prone to fatigue, often causing characteristic floorpan vibrations. Understanding how these parts interact is key to diagnosing faults within your drivetrain.

Common faults and symptoms

Symptoms of drivetrain wear on a BMW 5 Serie 530 I E39 can vary, yet they are typically noticeable to an attentive driver. One of the most frequent indicators is a shudder or vibration through the cabin under hard acceleration or at specific cruising speeds, pointing towards an out-of-balance propeller shaft or a worn centre bearing. A metallic clicking or snapping sound on tight turns usually signals a worn outer CV joint on a drive shaft. A distinct clunk when engaging a gear or releasing the clutch suggests excessive play in the universal joints or a deteriorated rubber coupling. These warnings should never be ignored: an unbalanced prop shaft places harmful strain on the gearbox output shaft and the differential pinion bearings. Addressing worn components early protects you against far more expensive drivetrain repairs.

Typical replacement parts for BMW 5 Serie 530 I E39

For the BMW 5 Serie 530 I E39, we focus on the critical driveline components most likely to require renewal after high mileage. Our specialist range includes:

  • Drive shaft BMW 5 Serie 530 I E39: Complete driveshaft assemblies to replace fatigued factory units and restore smooth, quiet operation.
  • Propeller shaft BMW 5 Serie 530 I E39: Precision-balanced prop shafts engineered to eliminate drivetrain vibration and harshness.

These components are specifically matched to the 530i specification, taking into account the torque ratings and dimensions unique to this six-cylinder setup. A fresh drive shaft ensures clean power delivery without shuddering, whilst a balanced prop shaft is essential for the refined cruising manners for which the E39 is renowned. We always recommend checking associated mounting bolts and seals during installation to ensure a secure, long-lasting repair.

Finding the right parts for your BMW 5 Serie 530 I E39

Select the specific product category for your BMW 5 Serie 530 I E39 below:

When troubleshooting driveline issues, navigating directly to the relevant subcategory helps you quickly isolate whether the problem lies with a drive shaft, a CV joint or the propeller shaft assembly. Comparing the dedicated sections for the BMW 5 Serie 530 I E39 makes it straightforward to select components matching your car's exact mechanical symptoms and fitment.

If you are uncertain which component you need, our knowledgeable customer support team is on hand with expert advice regarding your BMW driveline. We know the E39 platform thoroughly and are ready to guide you to the exact part your car requires.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden across the European Union. By specialising purely in driveline engineering, we offer the technical depth you need to order with complete confidence. When you purchase parts for your BMW 5 Serie 530 I E39 from us, you receive high-grade components backed by our accurate fitment guarantee. We know you want to get your car back on the road without delay, which is why we prioritise prompt dispatch and dependable shipping throughout Europe. Our focus is simple: OE-matching quality, competitive pricing and dedicated expertise for DIY enthusiasts and professional workshops alike.

Frequently asked questions about drivetrain parts for BMW 5 Series 530 i E39

How do I know if my BMW 530i E39 needs a new drive shaft?

The most common signs are clicking noises when turning or vibrations under acceleration. If the CV boot is split and grease has leaked out, there is a significant risk that the CV joint and consequently the drive shaft have suffered damage.

Why does my BMW E39 vibrate at higher speeds?

Vibrations at motorway speeds are often caused by an unbalanced propeller shaft or a worn centre bearing. A deteriorated propshaft coupling (guibo) that can no longer effectively dampen vibrations from the gearbox may also be to blame.

Do all E39 Series drive shafts fit my 530i?

No, drive shafts differ depending on engine size and gearbox type. Always select your car's make, model and engine in our vehicle selector to ensure you receive the correct part for your specific 530i.

What is included when I purchase a propeller shaft for the BMW 530i E39?

Our propeller shafts are supplied as complete assemblies, precision-balanced and ready for installation to eliminate driveline vibrations and guarantee smooth power delivery.

Can I replace the drive shaft myself on my BMW 5 Series?

Yes, it is achievable for a confident DIY mechanic equipped with the right tools, but it requires precision and careful adherence to tightening torques. We recommend consulting a workshop manual for your E39.

How quickly do you dispatch parts for the BMW E39?

We dispatch our stocked drivetrain components swiftly from our Swedish central warehouse across the EU, helping you get your BMW 530i back on the road without unnecessary delay.