BMW 5 Touring

Welcome to cvjoint24.com, your Swedish driveline specialist for the BMW 5 Touring. We offer an extensive range of dedicated components for your estate, whether you require a complete...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW 5 Touring

261 products
49 - 72 of 261
Item no.:512268
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 775 mm
Item no.:417838
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 725 mm
Item no.:515433
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 813 mm
Item no.:2110190
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 932 mm
  • ABS teeth: 48
Item no.:1153756
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 610 mm
  • ABS teeth: 48
Item no.:146494
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 184 mm
  • Joint diameter: 82 mm
Item no.:245601
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 484 mm
  • Outer splines: 27
Item no.:140120
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 43,95 mm
  • Total length: 180 mm
  • Outer splines: 27
Item no.:244366
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 29,97 mm
  • Total length: 502 mm
  • Outer splines: 27
Item no.:3527918
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:419441
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 758 mm
Item no.:516425
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 813 mm
Item no.:615334
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 670 mm
  • Joint diameter, gearbox side: 104 mm
Item no.:3501396
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:0669555
  • Position: Rear
  • Total length: 124 mm
Item no.:0940942
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:392033
  • Diameter: 24 mm
  • Height: 56 mm
Item no.:0622264
  • Total length: 110 mm
Item no.:0995118
  • Inner diameter: 44 mm
  • Outer diameter: 67 mm
Item no.:390847
  • Position: Front
Showing 49–72 of 261 products

Drivetrain for BMW 5 Touring

The BMW 5 Touring is an iconic estate combining luxury, practical usability and sporty handling. Maintaining this renowned driving pleasure demands a drivetrain in first-class condition. The drivetrain in a BMW 5 Touring is a sophisticated setup engineered to handle substantial torque, especially in the more powerful petrol and diesel variants. As driveline specialists, we understand the exacting demands placed on components for these cars. Whether your vehicle is rear-wheel drive or equipped with the xDrive all-wheel-drive system, every part of the power transmission is vital for both comfort and safety. We have compiled a comprehensive range of car parts specifically selected to match or exceed original equipment specifications.

By focusing solely on drivetrain components, we offer deep expertise and an extensive product range few general suppliers can rival. When choosing parts from us, you invest in your vehicle's service life, ensuring power from the engine reaches the road smoothly and without vibrations. Our inventory covers everything from durable CV boots to complete axles, making us a dependable one-stop specialist for your BMW 5 Touring.

How the BMW 5 Touring drivetrain is engineered

The driveline layout of a BMW 5 Touring follows the marque's classic philosophy, featuring a longitudinally mounted engine that directs power rearwards. Central to this setup is the propeller shaft for BMW 5 Touring, running along the underside to transmit torque from the gearbox to the rear differential. On xDrive models, a transfer box and a front prop shaft also route power to the front axle. Drive shafts then extend from the differentials out to each wheel, delivering the tractive force required to drive the car forward.

Each drive shaft is fitted with an inner and outer CV joint to accommodate suspension travel and, on the front axle, steering angles. This mechanical assembly relies on strict precision and dynamic balance. The slightest imbalance in the propeller shaft or a worn centre bearing can translate into noticeable vibrations throughout the whole chassis. Because 5 Series Touring models are frequently used for long-distance cruising and carrying heavy loads, these components endure severe stress over time. Understanding the relationship between the prop shaft, drive shafts and constant velocity joints is essential for correctly diagnosing faults and choosing the right spare parts for a long-lasting repair.

Common faults and symptoms

Symptoms of drivetrain wear can vary, but they are typically easy for an attentive driver to detect. One of the clearest indicators of a worn outer CV joint for BMW 5 Touring is a rhythmic clicking or knocking noise when taking tight corners at low speeds. This is usually caused by a split CV boot, allowing road grit to penetrate whilst grease escapes, rapidly destroying the joint's internal raceways and bearings. If you instead experience distinct vibrations through the car under acceleration, an inner CV joint for BMW 5 Touring may be failing.

Vibrations occurring at specific road speeds, regardless of throttle application, frequently point to an issue with the propeller shaft or its mounting. A whining or humming noise from beneath the centre of the car often indicates that a centre bearing for BMW 5 Touring has worn out and can no longer stabilise the rotating shaft. It is crucial to address these symptoms promptly; a severely worn constant velocity joint can ultimately fail completely, leaving you without drive. Inspecting CV boots regularly allows you to prevent costly repairs by simply replacing an inexpensive rubber boot before the joint itself suffers damage.

Common replacement parts for BMW 5 Touring

In our range for the BMW 5 Touring, you will find an extensive selection of critical power transmission components. With multiple versions of the drive shaft for BMW 5 Touring available, we cater for most engine options and driveline variants, from standard rear-wheel-drive setups to demanding xDrive configurations. We also supply a wide array of outer CV joints and inner CV joints, allowing you to overhaul an existing driveshaft assembly rather than replacing the complete unit when technically and economically sensible.

For issues concerning the longitudinal driveline, we provide complete propeller shafts as well as dedicated centre bearings. Replacing a worn centre bearing alone is a common, cost-effective fix to eliminate cabin vibrations and restore the smooth running expected of a BMW. All our spare parts are selected for durability and exact fitment. BMW owners demand high standards, which is why we never compromise on component quality. Keeping these parts ready for prompt dispatch across the EU ensures your car's downtime is kept to a minimum.

How to find the right part for your BMW 5 Touring

Navigate directly to the appropriate component category for your BMW 5 Touring:

With multiple potential drivetrain faults on modern estates, selecting the correct category from the start saves time. By comparing the dedicated product groups for the BMW 5 Touring, it is straightforward to distinguish between drive shaft, CV joint and propeller shaft issues, guiding you to the exact page matching your symptoms and vehicle specifications.

Our goal is to ensure you order the right component on the first attempt, confident that the part delivered matches your vehicle's requirements. With our specialist expertise behind you, sourcing reliable driveline components is simple.

Why buy from cvjoint24.com

When you choose cvjoint24.com, you are dealing with a dedicated drivetrain specialist. We are not a general auto parts retailer selling everything from wiper blades to cabin accessories; our expertise is focused entirely on vehicle driveline systems. This focus provides you with broader coverage and deeper technical insight. Simply select your car by make, model and engine variant to find parts that fit your BMW 5 Touring perfectly, backed by our comprehensive fitment guarantee.

We appreciate the importance of getting your vehicle back on the road without delay. As an international shop backed by a Swedish driveline specialist, our central warehouse in Helsingborg, Sweden, dispatches high-quality components swiftly across the European Union. We combine premium-grade products with competitive pricing and technical customer support that understands the mechanics of your vehicle's driveline. At CVJoint24, you receive the right part, reliable knowledge and helpful assistance throughout your purchase.

Frequently asked questions about BMW 5 Touring drivetrain parts

How do I know if my BMW 5 Touring needs a new drive shaft?

The most common symptoms are vibrations through the steering wheel or bodywork during acceleration, as well as clicking noises when cornering. If the vibrations increase with speed, it often indicates imbalance or wear in the shaft's joints.

What is the difference between an inner and an outer CV joint?

The outer CV joint is located closest to the wheel and allows for steering angles, whilst the inner joint sits closest to the gearbox or differential and primarily absorbs suspension movement along its length.

Can I replace just the centre bearing on my BMW 5 Touring?

Yes, provided the propeller shaft is otherwise in good condition, you can often replace just the centre bearing to eliminate vibrations and unusual noises coming from beneath the centre of the car.

Does the same drive shaft fit both rear-wheel drive and xDrive models?

No, drive shafts often differ in length and fittings between RWD and xDrive versions. Always select your exact make, model and engine to find the correct part for your car.

Why is there a clicking sound when I turn my BMW?

A clicking noise at full lock is a classic symptom of a worn outer CV joint, most often caused by a split CV boot that has allowed dirt and moisture to enter.

What does the fitment guarantee at CVJoint24 mean?

It means that when you select your specific make, model and engine variant, we guarantee the part will fit your BMW 5 Touring, or we will help you with a free exchange.