BMW 7 740 I LI Xdrive

Welcome to CVJoint24, the international shop of a Swedish driveline specialist providing premium drivetrain parts for the BMW 7 740 I LI Xdrive. For this high-performance luxury saloon...

Products for BMW 7 740 I LI Xdrive

5 products
1 - 5 of 5
Item no.:412629
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 764 mm
  • Joint diameter: 87,8 mm
Item no.:519081
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 833 mm
  • Joint diameter: 93,8 mm
Item no.:415227
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 774 mm
Item no.:249368
  • Position: Front right, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 485 mm
  • Outer splines: 27
Item no.:147777
  • Position: Front left, Inner
  • Inner splines: 24
  • Seal diameter: 44 mm
  • Total length: 184 mm
  • Joint diameter: 82 mm

Drivetrain for BMW 7 740 I LI Xdrive

The BMW 7 740 I LI Xdrive represents the pinnacle of German engineering, where supreme comfort meets potent performance. The drivetrain in this model is a complex assembly engineered to cope with high engine torque while seamlessly distributing power to all four wheels via the xDrive system. As a specialist in drivetrain components, we understand the exacting demands placed on parts for this specific variant. It is not merely about physical fitment; components must also adhere to strict tolerances to ensure the vehicle's sophisticated stability systems operate without interference. Here you will find tailored parts engineered for the long wheelbase and dedicated driveline architecture of the 740 I LI Xdrive. We focus on providing parts that match original equipment specifications, preserving the quiet, vibration-free ride characteristic of a BMW 7 Series.

How the drivetrain is engineered on the BMW 7 740 I LI Xdrive

The drivetrain of a BMW 7 740 I LI Xdrive centres around the intelligent xDrive all-wheel-drive setup. Power travels from the gearbox to a transfer box, which distributes torque between the front and rear axles in real time. High-precision, heavy-duty drive shafts transfer this power to the wheels. The front suspension layout on an xDrive model is particularly compact, placing stringent demands on the inner CV joints' articulation angles and their capacity to handle steering inputs alongside drive torque. The rear axle handles a substantial share of the propulsion during normal driving, meaning the rear drive shafts are subject to continuous load over long journeys. The entire driveline is intricately integrated with the chassis electronics, requiring every mechanical component in the chain to work flawlessly to deliver optimal traction across all road conditions.

Common faults and symptoms

Despite the exceptional build quality of the BMW 7 Series, drivetrain wear naturally occurs over time, particularly in actively driven cars or high-mileage examples. One of the most typical symptoms of a worn inner CV joint is a noticeable shudder or vibration through the body shell during acceleration, often most prominent between 70 and 110 km/h. If you hear a rhythmic clicking or knocking noise at full steering lock at low speeds, this typically points to a failing outer CV joint. Deteriorating CV boots are another critical checkpoint during routine servicing; if the protective grease escapes and road dirt penetrates the joint, it will degrade rapidly. In addition, an unbalanced driveshaft can cause persistent vibrations that are tricky to trace, usually stemming from worn internal joints or a missing balance weight.

Common parts to replace on the BMW 7 740 I LI Xdrive

For this specific executive saloon, we see consistent demand for components robustly dimensioned to manage the vehicle's kerb weight and substantial engine output. The parts most frequently replaced to maintain reliability include:

  • Front drive shaft: Owing to the layout of the xDrive system, the front shafts endure heavy mechanical stress during both sharp steering manoeuvres and hard acceleration.
  • Inner CV joint: A crucial component when eliminating drivetrain vibrations that develop under load close to the gearbox.
  • CV boots: Replacing a cracked CV joint boot promptly is the most cost-effective way to protect an otherwise healthy constant velocity joint from total failure.

Choosing the correct drive shaft for your BMW 7 740 I LI Xdrive ensures that power delivery remains seamless and quiet, just as intended for a luxury car of this stature. We supply parts specifically selected to withstand the performance demands of the 740 model.

How to find the right part for your BMW 7 740 I LI Xdrive

Navigate directly to the relevant component section for your BMW 7 740 I LI Xdrive:

On a vehicle with multiple potential driveline issues, starting in the precise subcategory saves valuable time. By comparing the dedicated product ranges for the BMW 7 740 I LI Xdrive, it is simple to differentiate between issues in a drive shaft, CV joint or propeller shaft, and head straight to the parts that match your symptoms and specifications.

We always recommend verifying whether the left or right side requires replacement, as well as cross-referencing any dimensions or spline counts detailed in the product specifications against your existing part to ensure an exact fit during installation.

Why shop with CVJoint24?

CVJoint24 is not just another online car parts retailer; we are the international shop of a Swedish driveline specialist, operating with dedicated focus from our central warehouse in Helsingborg, Sweden. For a BMW 7 740 I LI Xdrive owner, this provides access to in-depth technical expertise that truly understands the engineering behind every component. We ensure you receive the correct part through meticulous quality control and close partnerships with trusted manufacturers. Backed by our reliable fitment guarantee, you can order with absolute confidence knowing your parts will perform properly. When you choose CVJoint24, you partner with specialists who prioritise your vehicle’s dependability and your driving experience, delivering reliable solutions across the EU.

Frequently Asked Questions about Drivetrain for BMW 7 740 I LI Xdrive

How do I know if my BMW 7 740 I LI Xdrive needs a new drive shaft?

The most common signs are vibrations through the car under acceleration, clicking noises when turning, or visible damage and grease leaks from the drive shaft boots. If the vibrations increase with vehicle speed, an inner CV joint or the shaft itself is often worn.

Does the same drive shaft fit both the left and right side on my BMW?

No, on the BMW 7 740 I LI Xdrive the front drive shafts are typically different lengths for the left and right side due to the position of the gearbox. Always check the product description or select your exact vehicle model and engine to ensure you get the correct side.

What is the difference between an inner and outer CV joint on an xDrive?

The outer CV joint sits closest to the wheel and primarily accommodates steering angles. The inner CV joint sits closest to the gearbox/differential and accommodates suspension movement. On xDrive models, the inner joints are often the cause of vibrations under acceleration.

Can I replace just the inner CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can save money by replacing only the inner CV joint. We offer specific inner CV joint repair kits for the BMW 7 740 I LI Xdrive.

How does the xDrive system affect the choice of drivetrain parts?

xDrive places higher demands on rolling circumference and precise power delivery synchronisation. Fitting high-quality drive shafts with the correct specifications is crucial to avoid damaging the transfer case or interfering with the car's all-wheel-drive management.

Are the boot and fitting accessories included when I buy a CV joint from you?

Yes, our CV joint kits come complete with a CV boot, high-grade grease, clamps, and any circlips or bolts required for a proper installation on your BMW.