BMW X1 Sdrive 18 I E84

Drivetrain parts and components for BMW X1 Sdrive 18 I E84. Select your make, model and engine to ensure an accurate fit before ordering.

Products for BMW X1 Sdrive 18 I E84

16 products
1 - 16 of 16
Item no.:4159981
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 683 mm
Item no.:5159690
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 605 mm
Item no.:0240583
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:0240481
  • Total length: 1,610 mm
  • Number of joints: 2
  • Outer diameter 1: 47 mm
  • Bolt circle diameter 1: 84 mm
  • Outer diameter 2: 14 mm
Item no.:0298735
  • Total length: 1,477 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 47 mm
Item no.:0234287
  • Position: Rear
  • Total length: 1,490 mm
  • Number of joints: 2
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:640171
  • Position: Rear, Inner
Item no.:356207
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:0889580
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:0975059
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:694749
  • Position: Rear
Item no.:690856
  • Position: Rear
Item no.:0686840
  • Position: Rear

Drivetrain for BMW X1 Sdrive 18 I E84

The BMW X1 Sdrive 18 I E84 combines compact SUV styling with traditional rear-wheel drive. To preserve the driving dynamics and precision BMW is renowned for, every drivetrain component must remain in peak condition. The drivetrain on this model is engineered to handle the torque from the four-cylinder petrol engine and transfer power smoothly to the rear wheels. As specialists in the drivetrain, we understand the technical requirements of the E84 platform, especially in Sdrive trim where the propeller shaft and rear drive shafts are vital to overall handling.

When sourcing spare parts for your BMW X1 Sdrive 18 I E84, choosing components with the correct technical specifications is essential. While the E84 shares certain engineering solutions with contemporary models, it features a distinct chassis setup, making accurate part selection critical. We supply car parts that meet or exceed original equipment standards to ensure dependable longevity and performance. Whether you require a complete propeller shaft or dedicated drive shafts, our range is tailored specifically to this engine and drivetrain configuration.

How the drivetrain is structured on the BMW X1 Sdrive 18 I E84

The drivetrain layout in the BMW X1 Sdrive 18 I E84 follows classic BMW rear-wheel-drive design. Power originates at the engine and travels through the gearbox into a longitudinal propeller shaft. Running beneath the centre of the vehicle, this prop shaft forms a vital mechanical link to the rear differential. The differential then distributes torque out to the road wheels through two transverse drive shafts. Because the Sdrive variant omits front-wheel drive, the full driving load is placed on the rear assembly, demanding precise balance from the propeller shaft and high fatigue strength from the drive shafts.

The prop shaft on the E84 Sdrive 18i relies on a centre bearing and universal joints to absorb driveline vibrations and accommodate angular deflection under load. The rear drive shafts feature inner and outer CV joints protected by flexible rubber boots. These constant velocity joints allow the independent rear suspension to travel freely while maintaining steady power transfer. Understanding this assembly helps pinpoint faults quickly, as each component possesses distinct wear characteristics that directly affect overall refinement.

Common faults and symptoms

Several distinct symptoms indicate worn drivetrain parts on a BMW X1 Sdrive 18 I E84. One frequent warning sign is vibration felt through the floorpan or cabin under acceleration or at steady cruising speeds. This typically points to an unbalanced propeller shaft or a deteriorated centre bearing. When shuddering worsens under torque or vibrates the entire chassis, the prop shaft assembly should be inspected without delay. Rubber flex discs and support bearings inevitably degrade over time from heat and mechanical stress.

Another common sign is abnormal noise from the rear axle. Clicking sounds when cornering firmly or a low grinding noise while driving usually indicate a worn CV joint on a rear drive shaft. A torn CV boot allows lubricating grease to escape and abrasive road grit to enter, destroying the internal bearings rapidly. Addressing grease spray on the inner wheel rim or suspension components promptly helps avoid extensive and costly mechanical damage later.

Common parts to replace on the BMW X1 Sdrive 18 I E84

The propeller shaft is among the most frequently requested replacement parts for the BMW X1 Sdrive 18 I E84. Our range covers multiple prop shaft specifications to suit different production years and gearbox variants. Replacing the entire assembly with a complete unit is often far more cost-effective than overhauling individual U-joints, as you obtain a factory-balanced shaft that eliminates stubborn vibrations. This is a vital repair for returning the car to its original, quiet cruising comfort.

Alongside the prop shaft, the rear driveshafts demand regular inspection. We supply 2 specific drive shaft options for this model. When renewing a drive shaft, it is good workshop practice to inspect associated parts such as wheel bearings and ABS rings, as these are often accessed during the same job. Selecting high-grade replacement parts ensures smooth, quiet power delivery. Key components for this vehicle include:

  • Propeller shafts (complete balanced assemblies)
  • Rear drive shafts (left and right sides)
  • CV joint kits and CV boots
  • Propeller shaft centre bearings

How to find the right part for your BMW X1 Sdrive 18 I E84

Navigate directly to the relevant component section for your BMW X1 Sdrive 18 I E84:

When dealing with suspected driveline issues, selecting the correct subcategory straight away saves valuable diagnostic time. By comparing specific sections for the BMW X1 Sdrive 18 I E84, you can readily differentiate between driveshaft, CV joint or propeller shaft faults and browse parts matching your symptoms and technical layout.

Finding the exact replacement component for a BMW can sometimes prove complex due to mid-cycle updates and technical revisions. For your BMW X1 Sdrive 18 I E84, the most reliable approach is to select your vehicle by make, model and engine specification. Filtering by exact model variant matches your order to the correct chassis configuration. This is especially vital for propeller shafts, where dimensions and flange patterns vary between manual and automatic transmissions.

Once you filter down to the right category, verify the detailed product specifications against your existing part. We make it easy to find everything you need for your BMW. If you are unsure whether your vehicle requires a complete drive shaft or an individual joint repair kit, our technical team is on hand to help. Our aim is to ensure you receive the right part first time, avoiding workshop delays and unnecessary returns.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, holding quality and customer satisfaction as core priorities. We know that your BMW X1 Sdrive 18 I E84 demands precision-engineered parts to drive as intended. That is why we provide an accurate fitment guarantee across our entire inventory. When buying from us, you receive parts selected by driveline specialists with extensive experience in vehicle dynamics and power transfer. We match an expansive range with specialised technical support.

Alongside technical expertise, our central warehouse in Helsingborg, Sweden ensures prompt, reliable dispatch across the European Union. We continuously update our cataloguing data so you receive dependable, accurate recommendations and avoid workshop downtime. Choosing CVJoint24 gives you access to premium driveline parts at competitive rates, supported by specialists who know transmission and drive components inside out. We are your trusted partner for a smooth, quiet drive in your BMW.

Frequently asked questions about the drivetrain for BMW X1 Sdrive 18 I E84

How do I know if the propeller shaft on my BMW X1 Sdrive 18 I E84 needs replacing?

The most common signs are vibrations in the centre console or floor during acceleration, as well as a clunking noise when releasing the accelerator. If the centre bearing is worn, a whining noise can also occur.

Does the same drive shaft fit both the rear left and rear right sides?

It depends on the specific configuration. On many BMW models, the drive shafts differ in length between sides. Always select your vehicle's exact make, model and engine variant on our site to verify which side the part fits.

Why are there 6 different propeller shafts listed for my car?

The differences usually depend on whether the car has a manual or automatic gearbox, as well as the production date. The length of the prop shaft varies between these setups, which makes it vital to check your vehicle's exact specifications.

Are CV boots included when I buy a new drive shaft?

Yes, when you purchase a complete drive shaft from us, it comes fully assembled with inner and outer CV joints, as well as protective CV boots and grease.

Can I replace only the centre bearing on the propeller shaft?

It is technically possible, but on the E84 model the prop shaft is often balanced as a single assembly. If there is wear in the universal joints or bearing, we often recommend replacing the complete shaft to guarantee vibration-free driving.

What does the fitment guarantee mean for my BMW X1?

It means that if you have selected the correct vehicle model and engine and we have confirmed the part, we guarantee that it will fit your car physically. If not, we will help you find the right part at no extra cost.