BMW X1 Sdrive 18 I F48

Spare parts and drivetrain components for the BMW X1 Sdrive 18 I F48. Select your make, model and engine to ensure correct fitment before ordering.

Products for BMW X1 Sdrive 18 I F48

23 products
1 - 23 of 23
Item no.:1133329
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 542 mm
Item no.:1116364
  • Position: Front left
  • Splines gearbox side: 34
  • Splines wheel side: 31
  • Total length: 560 mm
Item no.:1162100
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 546 mm
Item no.:2145207
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 31
  • Total length: 920 mm
Item no.:0520632
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:147613
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 34
  • Total length: 151 mm
Item no.:253449
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 71 mm
Item no.:2151394
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 905 mm
Item no.:2177510
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 934 mm
  • Joint diameter: 87 mm
Item no.:356729
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 70 mm
Item no.:112218
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 545 mm
  • Diameter 1: 87 mm
Item no.:2129195
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 905 mm
Item no.:1121133
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 541 mm
Item no.:1177195
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 31
  • Total length: 547 mm
Item no.:3572628
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 142 mm
Item no.:1181587
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 541 mm
  • Joint diameter: 87 mm
Item no.:2173785
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 905 mm
  • Joint diameter: 87 mm
Item no.:143211
  • Position: Front left, Inner
  • Inner splines: 32
  • Splines gearbox side: 26
  • Seal diameter: 31 mm
  • Total length: 157 mm
Item no.:247514
  • Position: Front right, Inner
  • Inner splines: 32
  • Splines gearbox side: 26
  • Seal diameter: 31 mm
  • Total length: 476 mm
Item no.:3585705
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5
Item no.:3513249
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16×1,5
Item no.:1152005
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 541 mm
Item no.:2192069
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 31
  • Total length: 905 mm

Drivetrain for BMW X1 Sdrive 18 I F48

The BMW X1 Sdrive 18 I F48 is a popular compact SUV that blends practicality with BMW's hallmark driving pleasure. To maintain this performance, a properly functioning drivetrain is absolutely essential. As a Swedish driveline specialist, we understand the technical nuances of this specific model. The drivetrain in a BMW X1 Sdrive 18 I F48 is subjected to significant stresses every day, especially during stop-start city driving and when travelling over varied road surfaces. We stock an extensive range of components engineered specifically to match the original specifications of your BMW X1. Choosing the right spare parts prolongs your vehicle's lifespan and ensures that power transfer remains smooth and efficient, preventing unnecessary energy loss or wear on neighbouring mechanical assemblies.

How the drivetrain is configured on the BMW X1 Sdrive 18 I F48

Unlike earlier generations, the F48 platform relies on a front-wheel-drive architecture for its sDrive models. In your BMW X1 Sdrive 18 I F48, the engine is mounted transversely, meaning power is transferred directly from the gearbox to the front wheels via two drive shafts. This layout is space-efficient and delivers dependable traction under normal driving conditions. Each drive shaft consists of an inner and an outer CV joint, allowing for both suspension travel and steering angles whilst delivering torque to the wheels. Because the sDrive 18i is front-wheel drive, substantial load is placed on the front constant velocity joints to cope with the steep angles encountered on full steering lock. It is a sophisticated mechanical setup requiring high-precision components to minimise friction and heat build-up—a hallmark of BMW engineering.

Common faults and symptoms

There are several telltale signs that the drivetrain in your BMW X1 Sdrive 18 I F48 is beginning to wear. One of the most frequent symptoms of a failing outer CV joint is a rhythmic clicking or knocking noise heard when executing sharp turns at low speeds. If you instead notice vibrations through the steering wheel or chassis under acceleration, it may point to an imbalanced driveshaft or wear inside an inner CV joint. Another critical warning sign is a split CV boot; if grease escapes and road dirt gets inside, the joint deteriorates very quickly. Taking prompt action when these symptoms arise is crucial to prevent secondary damage to the gearbox or wheel bearings. Regularly checking the condition of your boots can often help you avoid more extensive and costly repairs down the line.

Common replacement parts for BMW X1 Sdrive 18 I F48

On the BMW X1 Sdrive 18 I F48, the front transmission components are those most frequently in need of attention. Our catalogue includes the key parts tailored specifically to your model, arranged across the following categories:

  • Drive shaft for BMW X1 Sdrive 18 I F48 – We offer several options depending on fitting side and specification.
  • Outer CV joint for BMW X1 Sdrive 18 I F48 – A vital component for steering articulation and power transfer.

Replacing a complete drive shaft is often a cost-effective solution, as you receive both the inner and outer joints alongside brand-new boots in one unit, guaranteeing a durable repair. If the wear is isolated to the outer end, however, replacing only the CV joint may suffice.

Finding the right part for your BMW X1 Sdrive 18 I F48

Navigate directly to the relevant section for the BMW X1 Sdrive 18 I F48:

When troubleshooting driveline issues, it pays to start in the correct category straight away. Comparing the exact sub-assemblies for the BMW X1 Sdrive 18 I F48 makes it easier to distinguish between drive shaft, CV joint or propeller shaft issues, leading you directly to the parts that match your symptoms and vehicle fitment.

Selecting the correct part for a BMW can be challenging, as factory specifications may vary depending on the production date and equipment options. To ensure you find the exact match straight away, we always recommend filtering our catalogue by your vehicle's make, model and engine variant. This will display the components technically compatible with your specific BMW X1 Sdrive 18 I F48. Always verify technical details such as the tooth count on the ABS ring or the overall length of the driveshaft if multiple options are shown. Because the F48 platform differs substantially from other BMW chassis setups, guessing fitment should always be avoided. Our database is optimised for precision, and should you have any questions, our expert team is ready to guide you to the correct purchase for your vehicle's requirements.

Why shop with CVJoint24

When you choose CVJoint24, you rely on a Swedish driveline specialist dedicated to quality, precision and customer peace of mind. We know how important it is to keep your car driving safely, which is why we supply only first-rate components. Thanks to our fitment guarantee, you can rest assured that the parts you order will fit your BMW X1 Sdrive 18 I F48 perfectly. We combine specialist technical knowledge with streamlined European logistics from our central warehouse in Helsingborg, Sweden. Our goal is to provide the right part at a competitive price without cutting corners on quality. Shopping with a dedicated specialist gives you access to a depth of range that general motor factors rarely match, making us the natural choice for your vehicle's drivetrain.

Frequently Asked Questions about Drivetrain for BMW X1 Sdrive 18 I F48

How do I know if my BMW X1 F48 needs a new drive shaft?

Common signs include vibrations under acceleration or unusual noises from the front suspension. If the vibrations stop when you lift off the accelerator, it is often a worn inner CV joint or drive shaft.

Do the parts fit both manual and automatic sDrive 18i models?

Drive shafts can differ depending on the gearbox type. Always select your vehicle make, model and engine variant in our search tool to ensure you get the correct part for your specific configuration.

What is the difference between sDrive and xDrive for the drivetrain?

sDrive means two-wheel drive (front-wheel drive on the F48), whereas xDrive is all-wheel drive. The drivetrain components differ significantly between these two systems.

Why is the CV boot so important on a BMW X1?

The CV boot protects the CV joint from dirt and water while keeping the lubricating grease inside. A split boot quickly leads to constant velocity joint failure due to friction and corrosion.

Can I replace just the outer CV joint on my F48?

Yes, if the fault is confined to the outer joint (often noticeable through clicking noises when cornering), you can replace only that part. We offer outer CV joints as individual spare parts.

How does your fitment guarantee work for BMW parts?

When you select your exact make, model and engine variant when ordering, we guarantee that the part will fit. In the unlikely event that an issue arises, we will help you swap it for the correct part without any fuss.