BMW X1 Sdrive 20 I E84

Spare parts and drivetrain components for BMW X1 Sdrive 20 I E84. Check fitment by make, model and engine before ordering.

Products for BMW X1 Sdrive 20 I E84

13 products
1 - 13 of 13
Item no.:0259094
  • Inner diameter: 30 mm
  • Bearing thickness: 36 mm
  • Hole spacing c/c: 160 mm
  • Height: 54 mm
Item no.:657484
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 30
  • Joint diameter: 87 mm
Item no.:621410
  • Position: Rear
  • Total length: 1,235 mm
  • Number of joints: 1
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
Item no.:0899066
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
  • Hole spacing c/c: 160 mm
Item no.:7308554
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:626424
  • Position: Rear
  • Total length: 1,411 mm
  • Outer diameter 1: 14 mm
  • Bolt circle diameter 1: 96 mm
  • Outer diameter 2: 14 mm
Item no.:0935884
  • Inner diameter: 44 mm
  • Outer diameter: 90 mm
Item no.:691482
  • Position: Rear
Item no.:694260
  • Position: Rear
Item no.:0689648
  • Position: Front
Item no.:0645597
  • Position: Rear

Drivetrain for BMW X1 Sdrive 20 I E84

The BMW X1 Sdrive 20 I E84 combines compact SUV styling with traditional rear-wheel drive, placing specific demands on the car's drivetrain. As the owner of an sDrive model, you rely on smooth power delivery from the longitudinal engine to the rear wheels without power loss or irritating vibrations. The drivetrain in this model is engineered to handle the torque produced by the turbocharged petrol engine, but over time, components experience natural wear that can compromise both ride comfort and safety. At CVJoint24, we specialise in these exact components and understand the technical nuances of the E84 platform.

Maintaining the drivetrain on your BMW is essential for extending your vehicle's lifespan. Because the rear-wheel-drive sDrive version avoids the complexity of front-wheel drive and all-wheel-drive transfer cases, attention centres primarily on the main longitudinal power transmission. We supply the components required to restore your vehicle's original driving dynamics. Choosing the correct parts ensures every bit of power reaches the tarmac exactly as Munich's engineers intended when the car left the factory.

How the drivetrain is configured on the BMW X1 Sdrive 20 I E84

The drivetrain layout of the BMW X1 Sdrive 20 I E84 follows BMW's classic rear-wheel-drive architecture. Power flows from the engine through the gearbox into a propeller shaft running along the underside of the vehicle. This prop shaft is a critical link that must remain perfectly balanced to prevent vibrations. Because the E84 shares much of its chassis architecture with the 3 Series, the parts are engineered for precision, yet they must also withstand the additional load forces generated by a taller SUV body during hard acceleration.

The propeller shaft in the Sdrive 20 I is typically a two-piece unit supported by a centre bearing in the middle. This centre bearing keeps the shaft properly aligned and dampens driveline vibrations. At the ends of the shaft, universal joints or flexible rubber coupling discs (doughnut couplings) accommodate slight angles and cushion torque shocks. For this model, the propeller shaft is the core component of the entire drivetrain behind the gearbox. A properly functioning prop shaft is vital for a smooth, vibration-free driving experience in your BMW X1.

Common faults and symptoms

Several clear symptoms indicate that the drivetrain in your BMW X1 Sdrive 20 I E84 is wearing out. One of the most frequent signs is vibration felt through the floorpan or driver's seat, often at specific speeds or under brisk acceleration. These vibrations usually stem from an unbalanced propeller shaft or a failing centre bearing. If you notice a clicking or clunking sound when engaging gear or applying throttle, it often points to play in the prop shaft joints or rubber couplings that have perished and cracked.

Another warning sign to watch for is a whining or rumbling sound from underneath the vehicle, which typically suggests that the propeller shaft centre bearing is failing. Because the BMW X1 E84 is a refined premium car, these mechanical noises become noticeable very quickly. Ignoring early warning signs can lead to secondary damage to the gearbox or rear differential, resulting in considerably more expensive repairs. Timely diagnosis and replacing worn parts promptly is always the most economical course of action.

Common replacement parts for BMW X1 Sdrive 20 I E84

When maintaining the drivetrain of the BMW X1 Sdrive 20 I E84, the propeller shaft is the most critical assembly to monitor. At CVJoint24, we see demand for complete propeller shafts rise steadily as these vehicles cover more kilometres. Rather than attempting piecemeal repairs on an old shaft with uncertain results, many customers choose to install a brand new, complete unit to ensure factory balance and reliability. This is often the quickest and most dependable way to eliminate stubborn driveline vibrations.

Along with the shaft itself, the centre bearing and its rubber mounting bush are standard service items. Constantly subjected to rotational stress and road grime, the rubber bush deteriorates and loses its flexibility over time. For the BMW X1 Sdrive 20 I E84, choosing parts with precise OE fitment is essential to avoid unwanted cabin resonance. We stock dedicated parts tailored to the E84 chassis, ensuring a lasting repair and preserving your vehicle's factory ride comfort.

How to find the right part for your BMW X1 Sdrive 20 I E84

Go directly to the right category for your BMW X1 Sdrive 20 I E84:

On a vehicle where driveline symptoms can overlap, starting in the correct category makes all the difference. Comparing the specific subcategories for the BMW X1 Sdrive 20 I E84 helps you distinguish between drive shaft, CV joint or propeller shaft issues, taking you straight to the products that match your car's symptoms and fitment specifications.

Finding the correct spare parts does not have to be difficult; we have made selecting parts for your BMW X1 Sdrive 20 I E84 straightforward and reliable. The easiest way to ensure perfect fitment is to select your car by its make, model and engine variant in our vehicle selector. This filters our catalogue down to the parts verified for your exact production year and engine configuration, eliminating ordering mistakes and saving valuable time in the garage.

Here are the key categories for your vehicle:

  • Propeller shafts for BMW X1 Sdrive 20 I E84 – Complete shafts for direct replacement.
Once you have selected the right category, you can rely on the premium quality of our components. We always advise checking any original OEM reference numbers against your old unit where possible, but our vehicle selection makes finding the exact match simple. If you ever need guidance, our driveline specialists are always ready to help you select the right parts.

Why buy from CVJoint24?

CVJoint24 is not just an online retailer; we are the international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden, to customers across the EU. When purchasing parts for your BMW X1 Sdrive 20 I E84 from us, you benefit from in-depth technical expertise and a carefully vetted range. We know how important your car is for your daily life, and we ship in-stock parts promptly to help you get back on the road without unnecessary delay.

We back our range with a comprehensive fitment guarantee, giving you complete peace of mind when ordering through our vehicle selector. Focused on accurate catalogue data and helpful technical advice, we are the trusted partner for both DIY mechanics and professional garages seeking reliable quality. Choose CVJoint24 for your BMW drivetrain parts to receive components that meet or exceed original equipment standards, backed by fair pricing and specialist support.

Frequently asked questions about drivetrain parts for the BMW X1 sDrive 20i E84

What are the most common signs that the propeller shaft needs replacing on my BMW X1 sDrive 20i?

The most common symptoms are vibrations through the floorpan or seats while driving, often between 80 and 120 km/h, as well as clunking noises when changing gear or accelerating.

Does the propeller shaft from an xDrive model fit my sDrive 20i E84?

No, propeller shafts for sDrive (rear-wheel drive) and xDrive (all-wheel drive) models differ in length and design. Always select your vehicle's exact make, model and engine to find the correct version.

Can I replace just the centre bearing, or do I need to replace the entire propeller shaft?

It is often possible to replace just the centre bearing, but if the vibrations stem from shaft imbalance or worn universal joints, replacing the complete prop shaft is the most reliable solution.

How do I ensure I choose the right part for my BMW X1 E84?

By selecting your vehicle's make, model and engine on cvjoint24.com, the product range is automatically filtered so that you only see parts engineered for your specific BMW X1 sDrive 20i E84.

Do you offer a fitment guarantee on drivetrain parts for BMW?

Yes, we offer a correct-fit guarantee when you choose your vehicle by make, model and engine, ensuring the part matches your car according to our technical specifications.

How quickly can I have my new propeller shaft delivered?

We aim for fast dispatch across Europe for in-stock items, keeping the time your BMW X1 spends in the garage to an absolute minimum.